Weidmuller
8523400000
WAS1 CMA 1/5/10A AC
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
Additional Information
- Part Number
- 8523400000
General Data
- Accuracy
- 0.5 % FSR
- Configuration
- DIP switch
- Current consumption
- 40 mA @ IOUT = 20 mA
- Current-carrying capacity of cross-connect.
- ≤ 2 A
- Galvanic isolation
- 2-way isolator
- Input/Output
- 1/ 5/ 10 A AC / 0(4)...20 mA; 0...10 V
- Rail
- TS 35
- Step response time
- typ. 700 ms
- Temperature coefficient
- ≤ 200 ppm/K
- Voltage supply
- 24 V DC ± 10 %
Probability Of Failure
- MTTF
- 533 Years
Approvals
- Approvals
- CE, CULUS, EAC
- ROHS
- Conform
- UL File Number Search
- E141197
Dimensions And Weights
- Length
- 72 mm
- Length (inches)
- 2.835 inch
- Width
- 22.5 mm
- Width (inches)
- 0.886 inch
- Depth
- 92.4 mm
- Depth (inches)
- 3.638 inch
- Weight
- 150 g
- Net weight
- 76.9 g
Connection Data
- Wire connection method
- Screw connection
- Type of connection
- Screw connection
- Clamping range, rated connection
- 2.5 mm²
- Clamping range, min.
- 0.5 mm²
- Clamping range, max.
- 2.5 mm²
Tender Specification Sheets
- Long specification
- Monitoring component for AC currents up to 10A with standard signal outputand electrical isolationCurrent monitoring component in 22.5 mm width for recording 50/ 60 Hz AC currents0...1 A / 0...5 A / 0...10 A. Standardised analogue current/voltage signalsare available on the output side. Input and output ranges can be adjusted via DIP switches.The 24 VDC power is supplied over the output circuit.The input and outputs are designed with 6 kV of electrical isolation.Add-on housing for TS35 rail mountingDimensions: L/W/H 72/ 22.5/ 92.4 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20 Input 0...1 A / 0...5 A / 0...10 A AC switchable 50 / 60 HzVoltage of measuring circuit 250 V ACOutput 0(4)...20 mA / 0...10 VLoad resistance < 600 Ohm Strom>1 kOhm / voltageTransmission error < 0,5% v. E. Temperature coefficient 200 ppm / KStep response time typ. 700 msAuxiliary power 24 VDC +/- 10 % via output circuitAmbient temperature range 0 °C...+50 °C Secure isolation EN 50178, 2-way isolation up to 6 kVTest voltage 4 kV input against outputRated voltage 300 V AC/DC at overvoltage category III and pollution degree 2Approvals cULusType WAS1 CMA 1/5/10A ac
- Short specification
- Monitoring component for AC currents up to 10A with standard signal output and electrical isolationCurrent monitoring component in 22.5 mm width for recording 50/ 60 Hz AC currents 0...1 A / 0...5 A / 0...10 A. Standardised analogue current/voltage signals are available on the output side. Input and output ranges can be adjusted via DIP switches. The 24 VDC power is supplied over the output circuit. The input and outputs are designed with 6 kV of electrical isolation.n>
Input
- Number of inputs
- 1
- Input current
- 0...1 A AC/ 0...5 A AC/ 0...10 A AC
- Input frequency
- 50...60Hz
Classifications
- ETIM 6.0
- EC002653
- ETIM 7.0
- EC002653
- EClass 9.0
- 27-21-01-20
- EClass 9.1
- 27-21-01-20
- EClass 10.0
- 27-21-01-20
- UNSPSC
- 30-21-18-01
Output
- Number of outputs
- 1
- Output signal limit
- Approx. 13 V or 24 mA
- Output voltage, note
- 0...10 V
- Output current
- 0(4)...20 mA
- Load impedance voltage
- ≥ 1 kΩ
- Load impedance current
- ≤ 600 Ω
- Offset voltage
- max. 0.05 V
- Offset current
- max. 100 µA
- Status indicator
- LED ON: OK; LED flashing: signal out of range;LED OFF: Error
Product Information
- Product information
- This product will soon be replaced by a new product.Please do not use with new systems. Please contact our technical support.
Environmental Product Compliance
- REACH SVHC
- Lead 7439-92-1
Insulation Coordination
- Clearance & creepage distances
- ≥ 5.5 mm
- EMC standards
- EN 55011, EN 61000-6
- Galvanic isolation
- 2-way isolator
- Impulse withstand voltage
- 6 kV
- Insulation voltage
- 4 kVeff / 5 s
- Pollution severity
- 2
- Rated voltage
- 300 V
- Surge voltage category
- III
Temperatures
- Operating temperature, max.
- 50 °C
- Operating temperature, min.
- 0 °C
- Storage temperature, max.
- 70 °C
- Storage temperature, min.
- -20 °C
- Operating temperature
- 0 °C...50 °C
- Storage temperature
- -20 °C...70 °C
Ratings Iecex/Atex/Cul
- Certificate no. (cULus)
- E141197
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther