Weidmuller
8560700000
WAS5 PRO RTD
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
€95.29
1
Payment methods:
A total of 25 Parts In-Stock from 7 Distributors
Product Conditions:
Offer with manufacturer lead time
Ships in:On Request
Best price:
Send request for price
Additional Information
- Part Number
- 8560700000
General Data
- Accuracy
- < 0.3 % of measured value
- Configuration
- DIP switch, Potentiometer
- Current-carrying capacity of cross-connect.
- ≤ 2 A
- Galvanic isolation
- 3-way isolator
- Input/Output
- configurable
- Linearity
- Yes
- Power consumption
- 830...880...980 mW at IOUT = 20 mA
- Rail
- TS 35
- Step response time
- fast/slow: 2-/3-/4-conductor: 1.2 s/2.2 s; potentiometer: 0.5 s/1.1 s
- Temperature coefficient
- Measuring range ≥ 200 K: ≤ 200 ppm/K100 K <= measuring range < 200 K: <= 250 ppm/K40 K <= measuring range < 100 K: ≤ 400 ppm/K
Probability Of Failure
- MTTF
- 270 Years
Approvals
- Approvals
- CE, CULUS, CULUSEX, EAC, GERMLLOYD
- ROHS
- Conform
- UL File Number Search
- E141197
Dimensions And Weights
- Length
- 92.4 mm
- Length (inches)
- 3.638 inch
- Width
- 17.5 mm
- Width (inches)
- 0.689 inch
- Depth
- 112.4 mm
- Depth (inches)
- 4.425 inch
- Net weight
- 138 g
Connection Data
- Type of connection
- Screw connection
- Stripping length, rated connection
- 7 mm
- Tightening torque, min.
- 0.4 Nm
- Tightening torque, max.
- 0.5 Nm
- Clamping range, rated connection
- 2.5 mm²
- Clamping range, min.
- 0.5 mm²
- Clamping range, max.
- 2.5 mm²
Tender Specification Sheets
- Long specification
- RTD measurement isolating transformer; configured with DIP switchesRTD measurement isolating transformer in 17.5 mm width with external power supply,for transmitting and isolating PT100 and Ni100 2-/3-/-4-wire signals, resistors and potentiometer signals.Analogue DC signals 0(4) to 20 mA / 0 to 10 V are available on the output side.Zero/span compensation with potentiometer. Add-on housing for TS35 rail mountingDimensions: L/W/H 92.4/ 17.5/ 112.4 mmScrew connection / Nominal cross-section 2.5 mm2Protection degree: IP 20 Input PT100, Ni100 2-/3-/4-wire Resistance 0...450 Ohm/ Potentiometer100 Ohm...100 kOhm Output 0/4...20 mA 0...10 V Load resistance < 600 Ohm/ Strom/> 1 kOhm/ voltageTransmission error < 0,8 % v. E. (RTD) typ. 200 ppm / °CAuxiliary power 24 VDC +/- 25 %Power loss approx. 0.9 WAmbient temperature range 0°C...+55 °CIsolation EN 50178, 3-way isolation up to 4 kV AC/DC of all circuits against each otherTest voltage 4 kV input against output against auxiliary powerRated voltage 300 V AC/DC at overvoltage category III and pollution degree 2Approvals cULus, cULusEX, GLType WAS5 PRO RTD
- Short specification
- RTD measurement isolating transformer; configured with DIP switchesRTD measurement isolating transformer in 17.5 mm width with external power supply,for transmitting and isolating PT100 and Ni100 2-/3-/-4-wire signals, resistors and potentiometer signals.Analogue DC signals 0(4) to 20 mA / 0 to 10 V are available on the output side.Zero/span compensation with potentiometer.
Input
- Number of inputs
- 1
- Sensor
- PT100/2-/3-/4-wire, Ni100/2-/3-/4-wire, potentiometer: min. 100 Ω, max. 100 kΩ, resistance: 0-450 Ω
- Line resistance in measuring circuit
- 50 Ω for 3- and 4-conductor
- Temperature input range
- Configurable, PT100: -200°C…850 °C, NI100: -60°C…+250 °C
Classifications
- ETIM 6.0
- EC002919
- ETIM 7.0
- EC002919
- EClass 9.0
- 27-21-01-29
- EClass 9.1
- 27-21-01-29
- EClass 10.0
- 27-21-01-29
- UNSPSC
- 30-21-18-01
Output
- Number of outputs
- 1
- Output voltage, note
- 0...10 V
- Output current
- 0...20 mA, 4...20 mA
- Wire break detection
- LED flashing (output value: > 20 mA, >10 V)
- Fine adjustment
- ≥ ± 5 %, Version 1 and later: ≥ 12.5 % / potentiometer: 12.5%...25%
- Load impedance voltage
- ≥ 1 kΩ
- Load impedance current
- ≤ 600 Ω
- Offset voltage
- max. 0.05 V
- Offset current
- max. 100 µA
- Status indicator
- Module active: LED on/ wire breakage: LED flashing/Error: LED off
Product Information
- Product information
- This product will soon be replaced by a new product.Please do not use with new systems. Please contact our technical support.
Environmental Product Compliance
- REACH SVHC
- Lead 7439-92-1
Insulation Coordination
- Clearance & creepage distances
- ≥ 3 mm
- EMC standards
- EN 55011, EN 61000-6
- Galvanic isolation
- 3-way isolator
- Impulse withstand voltage
- 4 kV
- Insulation voltage
- 2 kVeff / 5 s
- Insulation voltage input or output/rail
- 4 kVeff / 1 min.
- Insulation voltage input or output/supply
- 2 kVeff / 5 s
- Pollution severity
- 2
- Rated voltage
- 300 V
- Surge voltage category
- III
Temperatures
- Operating temperature, max.
- 55 °C
- Operating temperature, min.
- 0 °C
- Storage temperature, max.
- 85 °C
- Storage temperature, min.
- -20 °C
- Operating temperature
- 0 °C...55 °C
- Storage temperature
- -20 °C...85 °C
Ratings Iecex/Atex/Cul
- Certificate no. (cULus)
- E141197
Related products
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther