Weidmuller
8581230000
WAZ2 VMA V AC
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
A total of 1 Part In-Stock from 5 Distributors
Product Conditions:
Offer with manufacturer lead time
Ships in:On Request
Best price:
Send request for price
Additional Information
- Part Number
- 8581230000
General Data
- Accuracy
- 1,3 % (40...60 Hz) typ. 1 %; 2 % (70...400 Hz) typ. 1,5 %
- Configuration
- DIP switch
- Current consumption
- 40...30...24 mA @ IOUT =20 mA
- Current-carrying capacity of cross-connect.
- ≤ 2 A
- Galvanic isolation
- 3-way isolator
- Input/Output
- configurable
- Rail
- TS 35
- Step response time
- < 300 ms
- Temperature coefficient
- ≤ 250 ppm/K
- Voltage supply
- 24 V DC ± 25 %
Probability Of Failure
- MTTF
- 371 Years
Approvals
- Approvals
- CE, CULUS, EAC
- ROHS
- Conform
- UL File Number Search
- E141197
Dimensions And Weights
- Length
- 92.4 mm
- Length (inches)
- 3.638 inch
- Width
- 22.5 mm
- Width (inches)
- 0.886 inch
- Depth
- 112.4 mm
- Depth (inches)
- 4.425 inch
- Net weight
- 179 g
Connection Data
- Type of connection
- Tension-clamp connection
- Clamping range, rated connection
- 1.5 mm²
- Clamping range, min.
- 0.5 mm²
- Clamping range, max.
- 2.5 mm²
Tender Specification Sheets
- Long specification
- Monitoring component for AC voltages up to 450 V with standard signal output and electrical isolationVoltage monitoring component in 22.5 mm width for recording 50/ 60 Hz AC voltages 0...30 V / 0...70 V / 0...130 V / 0...250 V / 0...450 V. Standardised analogue current/voltage signals are available on the output side. The component has 4 kV of complete 3-way isolation and is supplied externally with 24 VDC. Add-on housing for TS35 rail mounting Dimensions: L/W/H 92.4/ 22.5/ 112.4 mm Tension-clamp connection / Nominal cross-section 1.5 mm2Protection degree: IP 20 Input 0...30 V / 0...70 V / 0...130 V / 0...250 V / 0...450 V AC 40...400 Hz sinus Voltage of measuring circuit max 475 V AC Output 0(4)...20 mA / 0...10 V Load resistance < 600 Ohm Strom >1 kOhm / voltageTransmission error < 1,3 % v. E. Temperature coefficient 250 ppm / K Step response time < 300 msAuxiliary power 24 VDC +/- 25 % Ambient temperature range 0 °C...+50 °C Secure isolation EN 50178, 3-way isolation up to 4 kVTest voltage 4 kV / 5 s Input / Output / supplyRated voltage 300 V AC/DC at overvoltage category III and pollution degree 2 Approvals cULus Type WAZ2 VMA V ac
- Short specification
- Monitoring component for AC voltages up to 450 V with standard signal outputand electrical isolationVoltage monitoring component in 22.5 mm width for recording 50/ 60 Hz ACvoltages 0...30 V / 0...70 V / 0...130 V / 0...250 V / 0...450 V. Standardised analogue current/voltage signals are available on the output side.The component has 4 kV of complete 3-way isolation and is supplied externally with 24 VDC.
Input
- Number of inputs
- 1
- Input resistance, voltage
- 30 kΩ / 70 kΩ / 130 kΩ / 250 kΩ / 450 kΩ
- Input measurement range
- 0…30 V AC, 0…70 V AC, 0…130 V AC, 0…250 V AC, 0…450 V AC
- Input frequency
- 40...400 Hz sinus
Classifications
- ETIM 6.0
- EC002653
- ETIM 7.0
- EC002653
- EClass 9.0
- 27-21-01-20
- EClass 9.1
- 27-21-01-20
- EClass 10.0
- 27-21-01-20
- UNSPSC
- 30-21-18-01
Output
- Number of outputs
- 1
- Output voltage, note
- 0...10 V
- Output current
- 0(4)...20 mA
- Load impedance voltage
- ≥ 1 kΩ
- Load impedance current
- ≤ 600 Ω
- Offset voltage
- max. 0.02 V
- Offset current
- max. 40 µA
- Status indicator
- Green LED
Product Information
- Product information
- This product will soon be replaced by a new product.Please do not use with new systems. Please contact our technical support.
Environmental Product Compliance
- REACH SVHC
- Lead 7439-92-1
Insulation Coordination
- Clearance & creepage distances
- Supply/output: 3 mm; Input/Output, Supply/output: 5.5 mm
- EMC standards
- EN 61000-2-6, EN 61000-6, EN 61326
- Galvanic isolation
- 3-way isolator
- Impulse withstand voltage
- Supply⁄output: 4 kV; input/output, input/output: 6 kV
- Insulation voltage
- 4 kVeff / 5 s
- Insulation voltage input or output/supply
- Input / power: 4 kVeff/ 5 s; output / power supply: 2 kVeff / 5 s
- Pollution severity
- 2
- Rated voltage
- supply/output: 300 V; input/output, supply/output: 600 V
- Surge voltage category
- III
Temperatures
- Operating temperature, max.
- 50 °C
- Operating temperature, min.
- 0 °C
- Storage temperature, max.
- 70 °C
- Storage temperature, min.
- -20 °C
- Operating temperature
- 0 °C...50 °C
- Storage temperature
- -20 °C...70 °C
Ratings Iecex/Atex/Cul
- Certificate no. (cULus)
- E141197
Related products
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther