Weidmuller
8937940000
MOS 24VDC/5-33VDC 10A
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
A total of 43 Parts In-Stock from 14 Distributors
Product Conditions:
Additional Information
- Part Number
- 8937940000
General Data
- Rail
- TS 35
- Colour
- black
- UL 94 flammability rating
- V-0
Probability Of Failure
- MTTF
- 399 Years
Feedback Output
- Solid-state type
- Bipolar transistor
- Nominal switching voltage
- 24 VDC ±20%
- Continuous current
- 50 mA
- Switch-off delay
- 5 s
Load Side
- Rated switching voltage
- 5...33 V DC
- Continuous current
- 10 A
- Rated switching current
- 10 A
- Load category
- LC A
- Pulse load, max. current
- ≤ 11 A (≤ 200 µs)
- Switch-on delay
- typ. 250 µs
- Switch-off delay
- typical. 700 µs
- Voltage drop at max. load
- approx. 100 mV
- Leakage current
- < 1 mA
- Min. switching current
- 10 mA
- Short-circuit-proof
- Yes (limited for 4 h / current limitation external < 200 A)
- Load side status indicator
- LED red, short-circuit /overload at the output
- Protective circuit, load side
- Current sensor, Varistor, Free-wheeling diode
- Max. switching frequency (DC control voltage)
- 50 Hz
Approvals
- Approvals
- CE, CULUS, DNV GL, EAC
- ROHS
- Conform
- UL File Number Search
- E141197
Dimensions And Weights
- Width
- 6.1 mm
- Width (inches)
- 0.24 inch
- Height
- 88.1 mm
- Height (inches)
- 3.468 inch
- Depth
- 97.8 mm
- Depth (inches)
- 3.85 inch
- Net weight
- 38.81 g
Connection Data
- Wire connection method
- Screw connection
- Stripping length, rated connection
- 7 mm
- Tightening torque, min.
- 0.4 Nm
- Tightening torque, max.
- 0.6 Nm
- Clamping range, rated connection
- 2.5 mm²
- Clamping range, min.
- 0.5 mm²
- Clamping range, max.
- 4 mm²
- Wire cross-section, solid, min.
- 0.5 mm²
- Wire cross-section, solid, max.
- 4 mm²
- Wire connection cross-section, finely stranded, min.
- 0.5 mm²
- Wire connection cross section, finely stranded, max.
- 2.5 mm²
- Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
- 0.5 mm²
- Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
- 1.5 mm²
- Conductor cross-section, flexible, AEH (DIN 46228-1), min.
- 0.5 mm²
- Conductor cross-section, flexible, AEH (DIN 46228-1), max.
- 1.5 mm²
- Blade size
- 0.6 x 3.5 mm
Contact Data
- Contact type
- 1 NO contact (POWER MOS-FET)
Control Side
- Rated control voltage
- 24 V DC ±20 %
- Power rating
- 400 mW
- Cut-in / dropout voltage
- 18 V / 13 V DC
- Status indicator
- Green LED
- Protective circuit
- Varistor, Reverse polarity protection
Classifications
- ETIM 6.0
- EC001504
- ETIM 7.0
- EC001504
- EClass 9.0
- 27-37-16-04
- EClass 9.1
- 27-37-16-04
- EClass 10.0
- 27-37-16-04
- UNSPSC
- 30-21-18-01
Product Information
- Product information
- The cable lengths must not exceed 30 m.
Environmental Product Compliance
- REACH SVHC
- Lead 7439-92-1
Insulation Coordination
- Rated voltage
- 300 V
- Pollution severity
- 2
- Surge voltage category
- III
- Clearance and creepage distances for control side - load side
- > 3 mm
- Dielectric strength for control side - load side
- 3 KVeff / 1 Min.
- Dielectric strength to mounting rail
- 4 kVeff / 1 Min.
- Impulse withstand voltage
- 4 kV (1.2/50 µs)
- Protection degree
- IP20
Temperatures
- Humidity
- 5 - 93% rel. humidity, Tu = 40°C, no condensation
- Operating temperature, max.
- 60 °C
- Operating temperature, min.
- -25 °C
- Storage temperature, max.
- 60 °C
- Storage temperature, min.
- -40 °C
- Operating temperature
- -25 °C...60 °C
- Storage temperature
- -40 °C...60 °C
Ratings Iecex/Atex/Cul
- Certificate no. (cULus)
- E141197
Further Details Of Approvals / Standards
- Standards
- DIN EN 50178, GL 2003-Vl-Abs. 9, IEC 62314, UL508
- Certificate No. (GERMLLOYD)
- 54853-08
- Certificate no. (cULus)
- E141197