- Dielectric strength at FG against PE
- ≥ 500 V
- Discharge current I
- 2.5 kA
- Input voltage, max. U
- 75 V
- Lightning test current, I
- 2.5 kA
- Max. continuous voltage, Uc (AC)
- 60 V
- Max. continuous voltage, Uc (DC)
- 75 V
- Number of poles
- 1
- Overload - failure mode
- Modus 2
- Protection level U
- ≤ 300 V
- Protection level on output side Wire-PE 1kV/µs, typically
- 85 V
- Protection level on output side Wire-wire 1 kV/µs, typically
- 80 V
- Protection level on output side Wire-wire 8/20 µs, typically
- 80 V
- Protection level, U
- 80 V
- Pulse-reset capacity
- ≤ 60 ms
- Rated current I
- 250 mA
- Rated voltage (AC)
- 48 V
- Rated voltage (DC)
- 68 V
- Requirements category acc. to IEC 61643-21
- C1, C2, C3, D1
- Signal transmission properties (-3 dB)
- 2.7 MHz
- Signalling contact
- No
- Standards
- IEC 61643-21, IEC 62305, DIN EN 60079-0.2009, DIN EN 60079-11:2007, DIN EN 60079-26:2007, DIN EN 61241-11:2006
- Surge current-carrying capacity C1
- < 1 kA 8/20 μs
- Surge current-carrying capacity C2
- 5 kA 8/20 μs
- Surge current-carrying capacity C3
- 100 A 10/1000 μs
- Surge current-carrying capacity D1
- 2.5 kA 10/350 μs
- Voltage type
- AC
- Volume resistance
- 4.7 Ω