New Factory Sealed - A brand-new, unused, unopened, undamaged item in its original packaging, factory sealed.
Delivery time:
from1business day
Delivery from:
GB
DE
CZ
IT
RO
PL
PT
LV
NL
ES
FR
Available Offers (18)
Weidmuller
8965430000
Condition:
New Surplus
Available:
1 pc.
In-Stock
Offer from:
Trusted Automa.Net Supplier
Estimated Delivery:
On Request
1
£175.64
net
Free Shipping!
Weidmuller
8965430000
Condition:
New Factory Sealed
Available:
0 pcs.
On Request
Offer from:
Trusted Automa.Net Supplier
Estimated Delivery:
On Request
Warranty:
12 months
1
Free Shipping!
Weidmuller
8965430000
Condition:
New Factory Sealed
Available:
0 pcs.
On Request
Offer from:
Trusted Automa.Net Supplier
Estimated Delivery:
On Request
Warranty:
12 months
1
Free Shipping!
Weidmuller
8965430000
Condition:
New Factory Sealed
Available:
0 pcs.
On Request
Offer from:
Trusted Automa.Net Supplier
Estimated Delivery:
On Request
Warranty:
12 months
1
Free Shipping!
Weidmuller
8965430000
Condition:
New Factory Sealed
Available:
0 pcs.
On Request
Offer from:
Trusted Automa.Net Supplier
Estimated Delivery:
On Request
1
Free Shipping!
Additional Information
Part Number
8965430000
Probability Of Failure
MTBF
177 Years
SFF
80 %
SIL PAPER
SIL certificate
Approvals
ROHS
Conform
UL File Number Search
E337701
Dimensions And Weights
Width
22.5 mm
Width (inches)
0.886 inch
Height
119.2 mm
Height (inches)
4.693 inch
Depth
113.6 mm
Depth (inches)
4.472 inch
Net weight
186 g
Safety-Related Specifications Low Demand Mode
Average Probability of Failure on Demand (PFD
1.92 x 10-4 (Tproof = 1 year), 3.67 x 10-4 (Tproof = 2 years), 8.92 x 10-4 (Tproof = 5 years), additional data in the safety manual
Connection Data
Type of connection
Screw connection
Tightening torque, min.
0.4 Nm
Tightening torque, max.
0.6 Nm
Clamping range, rated connection
2.5 mm²
Clamping range, min.
0.25 mm²
Clamping range, max.
2.5 mm²
Wire connection cross section AWG, min.
AWG 26
Wire connection cross section AWG, max.
AWG 12
Rated Data Ul
UL certificate
E337701.pdf
Safety-Related Basic Specifications
Demand mode
High
Description of the "safe state"
analogue Output ≤ 3.6 mA or output ≥ 21 mA
Device type
A
Hardware fault tolerance (HFT)
0
Mean Time To Repair (MTTR)
24 h
Safe Failure Fraction (SFF)
80 %
T
5 Years
Total failure rate for dangerous detected failures (λ
173 FIT
Total failure rate for dangerous undetected failures (λ
41 FIT
Total failure rate for safe detected failures (λ
0 FIT
Total failure rate for safe undetected failures (λ
0 FIT
Safety category
SIL 2
Probability of outage PFH
4.1 x 10-8 h-1
Tender Specification Sheets
Long specification
Ex supply isolator for standard DC current signals, 2-channel, HART transparent2-channel supply isolator in 22.5 mm width with external power supply,for transmitting and isolating 4...20 mA standard signals from Ex Zones 0,1,2 to the safezones. The component has an active and passive input. External sensors can be supplied with > 15 VDC. The 4...20 mA output circuit can be operated either passively or actively. Status and error messages are available via a relay contact (NO).The component can be configured using standard FDT/DTM software.Add-on housing for TS35 rail mountingDimensions: L/W/H 119.2/ 22.5/ 113.6Screw connection/ Nominal cross-section 2.5 mm2Protection degree: IP 20 Input 4...20 mA > 15 V DC sensor supply Output active 4...20 mA passive 4...20 mA current loop max. 26 V DCLoad < 600 OhmAccuracy < 0,1 % v.ETemperature coefficient < 0,01% v.E./°C (Tu) Alarm output relay 1 NO contact 250 V AC / 30 V DC @ 2A safe zone 32 V AC @ 0.5 A/ 32 VDC @ 1 A Zone 2Auxiliary power 19...31.2 V DCPower loss approx. 1.8 WAmbient temperature range -20 °C...+60 °CSecure isolation EN 61010, 3-way isolation up to 2.6 kV AC/DC of all circuits against each otherWorking voltage 300 V AC/DC at overvoltage category II and pollution degree 2Approvals cULus, ATEX IECEX, FMATEX marking II 3 G ExnA nC IIC T4ATEX characteristic data U0 = 28 V DC I0 = 93 mA DC P0 = 650 mWType ACT20X-HAI-SAO-S
Short specification
Ex supply isolator for standard DC current signals, 2-channel, HART transparent2-channel supply isolator in 22.5 mm width with external power supply,for transmitting and isolating 4...20 mA standard signals from Ex Zones 0,1,2 to the safezones. The component has an active and passive input. External sensors can be supplied with >15 V DC. The 4...20 mA output circuit can be operated either passively or actively. Status and error messages are available via a relay contact (NO).The component can be configured using standard FDT/DTM software.
Alarm Output
Alarm function
Signal limit exceeded, Line interruption at the input, No supply voltage, Device error
Type
Relay, 1 NC (voltage-free)
Nominal switching voltage
≤ 125 V AC / 110 V DC (safe area)≤ 32 V AC / 32 V DC (zone 2)
Continuous current
≤ 0.5 A AC / 0.3 A DC (safe zone), ≤ 0,5 A AC / 1 A DC (zone 2)
Power rating
≤ 62.5 VA / 32 W (safe area)≤ 16 VA / 32 W (Zone 2)
Classifications
ETIM 6.0
EC002475
ETIM 7.0
EC002475
EClass 9.0
27-21-01-23
EClass 9.1
27-21-01-23
EClass 10.0
27-21-01-23
UNSPSC
30-21-18-01
Output
Load stability
≤ 0.01 % of end value / 100 Ω
Type
active (as current source) or passive (as current sink)
Influence of load resistance
≤ 0.01% of span / 100 Ω
2-wire supply
≤ 26 V DC
Output signal limit
< 28 mA
Output current
4...20 mA
Cut-off frequency (-3 dB)
0.5…2.5 kHz @ 3.5…23 mA bi-directional HART® signal
Load impedance current
≤ 600 Ω
Product Information
Product information
Weidmüller provides an extended guarantee period of 36 months for this device.
Environmental Product Compliance
REACH SVHC
Lead 7439-92-1
Data For Ex Applications (Atex)
Voltage U
Current loop 28 V / externally 10 V
Current I
Current loop 93 mA / externally 10 mA
Power P
Current loop 0.65 W / externally 0.1 W
Marking
II (1) G [Ex ia Ga] IIC/IIB/IIA, II (1) D [Ex ia Da] IIIC, I (M1) [Ex ia Ma] I
Installation location
Device installed in safe area, zone 2
Insulation Coordination
EMC standards
DIN EN 61326, NE 21
Insulation voltage
2.6 kV (input / output)
Pollution severity
2
Rated voltage
300 V
Surge voltage category
II
Input Ex
Input current
4…20mA
Input frequency
0,5…2,5 kHz @ 3,5…23 mA bi-directional HART® signal
Output signal in case of wire break
< 1 mA
Residual ripple (current loop)
< 7.5 mVeff
Sensor supply
3.8…26 V DC
Type
intrinsically safe circuit, active (as current source) or passive (as current sink)