Phoenix Contact
1628124
1 / 1
Beschreibung
Socket Outlet, Rear protective cover screw connection, For charging electric vehicles with alternating current (AC), Compatible with infrastructure charging plugs, Type 2, IEC 62196-2, 32 A / 250 V (AC), Single wires, length: 0.7 m, Locking actuator: 12 V, 4-position, Rear panel mounting, Generation 1, 'PHOENIX CONTACT' logo- Country of Origin
- DE
- Part Number
- 1628124
- Tariff Code
- 85444290
- EAN
- 4055626385365
- UPC
- 4055626385365
- ETIM
- Group Code : EG000014
- Group Description : Industrial socket/plug applications
- Class Description : Charging connector E-Mobility
- Class Code : EC002898
- Version : 7
- Erhalten Sie bis zu 90 Tage Zahlungsziele von 500+ Lieferanten
- Wiederverkaufsrabatte bis zu 40%!
Preisanfrage senden
1
Zahlungsmöglichkeiten:
Product definition
- Type
- Rear protective cover screw connection
- Application
- For charging electric vehicles with alternating current (AC)
- Application
- Compatible with infrastructure charging plugs
- Affixed logo
- PHOENIX CONTACT' logo
- Design
- Generation 1
- Standards/regulations
- IEC 62196-2
- Charging standard
- Type 2
- Charging mode
- Mode 3, Case B
- Note on the connection method
- Crimp connection, cannot be disconnected
Dimensions
- Height
- 96 mm
- Width
- 75 mm
- Depth
- 76.2 mm
- Bore dimensions
- 60 mm x 60 mm
- Conductor length
- 0.7 m (AC cables)
- Conductor length
- 0.5 m (Locking actuator cables)
- Cable structure
- 3x 6.0 mm² + 2x 0.5 mm²
- Type of conductor
- Single wires
Electrical properties
- Maximum charging power
- 8 kW
- Type of charging current
- AC single-phase
- Number of phases
- 1
- Number of power contacts
- 3 (L1, N, PE)
- Rated current of power contacts
- 32 A
- Rated voltage for power contacts
- 250 V AC
- Number of signal contacts
- 2 (CP, PP)
- Rated current for signal contacts
- 2 A
- Rated voltage for signal contacts
- 30 V AC
- Type of signal transmission
- Pulse width modulation
- Note on the connection method
- Crimp connection, cannot be disconnected
Material
- Material
- Plastic
- Material surface of contacts
- Ag
Mechanical properties
- Insertion/withdrawal cycles
- > 10000
- Insertion force
- < 100 N
- Withdrawal force
- < 100 N
Ambient conditions
- Ambient temperature (operation)
- -30 °C - 50 °C
- Ambient temperature (storage/transport)
- -40 °C - 80 °C
- Max. altitude
- 5000 m (above sea level)
- Degree of protection
- IP44 (plugged in)
- Degree of protection
- IP54 (with protective cover, see accessories)
Locking
- Locking type
- Locking in the inserted state with a locking mechanism
Locking actuator
- Number of positions of theconnectors
- 4
- Operating voltage
- 12 V (Typical power supply at the motor)
- Possible power supply range at the motor
- 9 V - 16 V
- Maximum voltage for locking detection
- 30 V
- Typical motor current for locking
- 0.2 A
- Reverse current of the motor
- max. 1 A
- Max. dwell time with reverse current
- 1000 ms
- Recommended adaptation time
- 600 ms
- Pause time after entry or exit path
- 3 s
- Service life insertion cycles
- > 10000 load cycles
- Ambient temperature (operation)
- -30 °C - 50 °C
- Cable length
- 0.5 m
- Cable structure
- 4 x 0.5 mm²
- Lock recognition
- available
- Mechanical emergency release
- available
Environmental Product Compliance
- REACh SVHC
- Lead 7439-92-1
- China RoHS
- Environmentally Friendly Use Period = 10;
- China RoHS
- For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration'
Design
- Design line
- Generation 1
- Housing color
- black
- Customer variations
- On request
Mounting
- Possible mounting positions
- Rear panel mounting
- Possible mounting positions
- Front mounting only possible when the locking actuator is removed (see EV-T2M3SE...E00 versions)
- Restrictions to mounting position
- Only 0 to 90 degree frontal inclination possible, see figure
- Mounting position of the locking actuator
- Top center
- Screw connection of a protective cover
- Only rear mounting possible
- Max. wall thickness
- max. 50 mm (Rear panel mounting, normative maximum specification for infrastructure plug)
- Max. wall thickness
- max. 28 mm (Rear mounting, normative maximum specification for infrastructure plug when using protective cover 1405217)
- Max. wall thickness
- max. 10 mm (Front mounting, when using the locking mechanism)
- Mounting hole diameter
- 7.00 mm (ø)
Ähnliche Produkte
Andere Kategorien
AktuatorenBlöckeKabel, Rohre & SchläucheKompressorenKontrolleKupplungen & FittingsZylinder & KolbenElektronikFilterHVACIndustrie-PCs & HMIsBeleuchtungLineartechnikMotorenStromversorgungLeistungsübertragungPumpen & VentileErneuerbare energieRobotikDichtungen, Ringe & VerbinderSensoren und MessgeräteWerkzeuge und ZubehörCNCSonstiges