Phoenix Contact 2966809

The PLC-OSC-230UC/ 48DC/100/SEN solid-state relay module serves as a PLC interface for input functions. It comprises a PLC-BSC.../SEN basic terminal block equipped with a screw connection and a plug-in miniature solid-state relay, suitable for mounting on a DIN rail NS 35/7.5. The device operates with an input voltage of 230 V AC or 220 V DC and delivers an output voltage range from 3 V DC to 48 V DC with a maximum continuous current of 100 mA.

This relay module is characterized by its compact dimensions, measuring 6.2 mm in width, 80 mm in height, and 94 mm in depth. It features a 1 N/O contact configuration with a typical response time of 3 ms and a turn-off time of 5 ms. The input voltage range is specified as 184 V AC to 253 V AC, with a nominal input voltage of 230 V AC, allowing for flexibility in various applications.

The device supports a basic insulation level and is compliant with the overvoltage category III and pollution degree 2. It is designed to operate in ambient temperatures ranging from -25 °C to 60 °C, and it is suitable for storage and transport within a temperature range of -25 °C to 70 °C. The relay also features protective measures including reverse polarity protection and a polarity protection diode.

For installation, the module is designed for any mounting position on the DIN rail and can accommodate conductor cross-sections from 0.14 mm² to 2.5 mm². The tightening torque is specified between 0.6 Nm and 0.8 Nm. Compliance with relevant EMC and Low...