Prosoft
PLX31-EIP-PND
1 / 2
Beschreibung
The EtherNet/IP™ to PROFINET® IO Device (slave) gateway offers bi-directional data transfers between EtherNet/IP™ controllers and a PROFINET® IO controller. The EtherNet/IP™ Driver supports I/O connections for guaranteed data delivery or Message instructions to send data to/from the PACs. The gateway supports 1440 bytes of input data and 1440 bytes of output data for larger applications. In addition, the gateway’s multiple I/O connections, allow you to set different RPIs for control data and module diagnostics, enabling you to optimize your Ethernet bandwidth.- Part Number
- PLX31-EIP-PND
Zahlungsmethoden:
- Bestes Angebot von:
Vertrauenswürdiger Automa.Net Lieferant- Verfügbarkeit:
- 1 Stk.Auf LagerAktualisiert am: 21-10-2024
- Geschätzte Lieferung:
- Auf Anfrage
- Zustand:
- Neuer Überschuss
Neuer Überschuss - Ein neuer, unbenutzter, unbeschädigter Artikel ohne Herstellergarantie. Der Artikel kann ohne Originalverpackung oder in Ersatzverpackung geliefert werden. Wenn vorhanden, könnte die Verpackung geöffnet worden sein.
Sicherer Zahlungsprozess
Rückgabe- und Erstattungsrichtlinien
Versandrichtlinien
Garantiebedingungen
Specifications
- Number of Class 3 Server Connections
- 5
- Supported PLC Types
- PLC2, PLC5, SLC, CLX, CMPLX
- Supported Message Types
- PCCC and CIP
- Number of Class 3 Client Connections
- Connected - 2
- Number of Class 3 Client Connections
- Unconnected - 1
- Number of Class 1 I/O Connections
- 8
- Max I/O connection sizeIn/Out
- 496/496 bytes
- Max RPI time
- 10 ms per connection
- CIP Services Supported
- 0x4C - CIP Data Table Read
- CIP Services Supported
- 0x4D - CIP Data Table Write
- Command List
- Support for 100 commands per Client, each configurable for command type, IP address, register to/from addressing and word/bit count.
- Command Sets
- PLC-2/PLC-3/PLC5 Basic Command Set
- Command Sets
- PLC5 Binary Command Set
- Command Sets
- PLC5 ASCII Command Set
- Command Sets
- SLC500 Command Set
Hardware
- Power Supply
- 24 VDC nominal
- Power Supply
- 10 to 36 VDC allowed
- Power Supply
- Positive, Negative, GND Terminals
- Current Load
- 24 VDC nominal @ 300 mA
- Current Load
- 10 to 36 VDC @ 610 mA maximum
- Operating Temperature
- -25°C to 70°C (-13°F to 158°F)
- Storage Temperature
- -40°C to 80°C (-40°F to 176°F)
- Shock
- IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational)
- Shock
- IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operational)
- Vibration
- IEC 60068-2-6; 5G @ 10 to 150 Hz
- Relative Humidity
- 5% to 95% RH with no condensation
- Dimensions (H x W x D)
- 5.38 x 1.99 x 4.38 in 13.67 x 5.05 x 11.13 cm
- LED Indicators
- Configuration (CFG), Error (ERR), Power (PWR), Hardware Fault (FLT), Network Status (NS), EtherNet/IP™ Class I or Class III Connection Status (EtherNet/IP Only) Module Status (MS), ModuleConfiguration Status (EtherNet/IP Only) Ethernet Communication Port Link/Activity, and 100 mbit
- Ethernet Port
- 10/100Mbit half-duplex RJ45 Connector Electrical Isolation 1500 Vrms at 50 to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950: 1991 Ethernet Broadcast Storm Resiliency is less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration
- Shipped With Each Unit
- 2.5 mm screwdriver
- Shipped With Each Unit
- ProSoft Solutions DVD
- Shipped With Each Unit
- J180 Power Connector
- Shipped With Each Unit
- 5’ straight-through Ethernet cable
Ähnliche Produkte
Andere Kategorien
AktuatorenBlöckeKabel, Rohre & SchläucheKompressorenKontrolleKupplungen & FittingsZylinder & KolbenElektronikFilterHVACIndustrie-PCs & HMIsBeleuchtungLineartechnikMotorenStromversorgungLeistungsübertragungPumpen & VentileErneuerbare energieRobotikDichtungen, Ringe & VerbinderSensoren und MessgeräteWerkzeuge und ZubehörCNCSonstiges