Wago
2273-204
1 / 2
- Part Number
- 2273-204
- Tariff Code
- 85369010000
- UPC
- 4050821027867
- ETIM
- Group Code : EG000047
- Group Description : Installation, isolation and connection material
- Class Description : Screw less terminal
- Class Code : EC000446
- Version : 7
€0.13
netVersand von:
€35.00
1
Zahlungsmethoden:
- Bestes Angebot von:
Vertrauenswürdiger Automa.Net Lieferant- Verfügbarkeit:
- 20600 Stk.Auf LagerAktualisiert am: 20-11-2024
- Garantie:
- 12 Monate
- Geschätzte Lieferung:
- 26-27 November zu Vereinigtes Königreich
- Zustand:
- Neu versiegelt ab Werk
Neu versiegelt ab Werk - Ein brandneuer, unbenutzter, ungeöffneter, unbeschädigter Artikel in seiner original vom Hersteller versiegelten Verpackung.
Sicherer Zahlungsprozess
Rückgabe- und Erstattungsrichtlinien
Versandrichtlinien
Garantiebedingungen
Ratings Per Iec/En
- Ratings per
- IEC/EN 60998
- Nominal voltage (II/2)
- 450 V
- Rated surge voltage (II/2)
- 4 kV
- Rated current
- 24 A
- Legend (ratings)
- (II / 2) ≙ Overvoltage category II / Pollution degree 2
Environmental Requirements
- Continuous operating temperature
- 105 °C
- Temperature marking per EN 60998
- T60
Physical Data
- Width
- 18 mm / 0.709 inches
- Height
- 5.8 mm / 0.228 inches
- Depth
- 16.7 mm / 0.657 inches
Material Data
- Note (material data)
- <a href="https://www.wago.com/us/material-specifications" href="_blank">Information on material specifications can be found here</a>
- Color
- Transparent
- Cover color
- Red
- Flammability class per UL94
- V2
- Fire load
- 0.034 MJ
- Weight
- 1.319 g
Specifications
- Product Group Code
- 0007
Commercial Data
- Packaging type
- Box
- Country of origin
- DE
- GTIN
- 4050821027867
- Customs tariff number
- 85369010000
Notes
- Safety information
- In grounded power lines
Connection 1
- Connection technology
- PUSH WIRE®
- Actuation type
- Push-in
- Connectable conductor materials
- Copper || Aluminum
- Connectable conductor materials (note)
- Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste <a href="https://www.wago.com/249-130">249-130</a> is used for termination.“Alu-Plus” Contact Paste Advantages:Automatically destroys the oxide film during clamping.Prevents fresh oxidation at the clamping point.Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).Provides long-term protection against corrosion.For spring clamp connections with PUSH WIRE® connection technology, WAGO recommends that the aluminum conductor first be cleaned and then immediately inserted into the clamping unit filled with “Alu-Plus” contact paste.It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::2.5 mm² = 16 A4 mm² = 22 A
- Solid conductor
- 0.5 … 2.5 mm² / 20 … 16 AWG
- Strip length
- 11 mm / 0.43 inches
- Wiring direction
- Side-entry wiring
Ratings Per Ul 1059
- Approvals per
- UL 486C
- Rated voltage (UL)
- 600 V
- Rated current (UL)
- 20 A
