Fluke
5606-50-X
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
General Specifications
- Minimum insulation resistance
- 20 MΩ at 23°C
- Temperature range
- -200°C to 160°C
- Accuracy1
- ±0.04°C at 0.01°C±0.06°C at 160°C
- Temperature coefficient
- 0.00385 Ω/Ω/°C
- Sheath diameter
- 3.1 mm ±0.1 mm (1/8 in ±0.004 in)
- Lead-wire cable type
- Enameled copper wire
- Response time5
- 12 seconds typical
- Calibration
- Calibration not included. NVLAP accredited calibration available. See ordering information.
- Sensor length
- 30 mm ±3mm (1.2 in ±0.1 in)
- Hysteresis
- ±0.015°C
- Short-term repeatability2
- ±0.03°C at 0.01°C±0.04°C at 160°C
- Minimum immersion length
- Full immersion
- Transition junction temperature range4
- -200°C to 160°C
- Sheath material
- 316 SST
- Sheath length
- 50 mm ±5 mm(2 in ±0.2 in)
- Lead-wire length
- 2.4 meters (8 ft)
- Nominal resistance at 0.01°C
- 100 Ω ±0.1 Ω
- Transition junction dimensions
- No transition
- Maximum immersion depth in liquid medium
- Full immersion
- Sensor location
- 3 mm ±1 mm from tip (1.2 in ±0.04 in)
- Lead-wire temperature range
- 160°C
- Calibration
- 1. Includes calibration and 100 hr drift (k = 2). 2. Three thermal cycles from min to max temp, includes hysteresis, 95% confidence (k = 2). 3. After 100 hours at max temp, 95% confidence (k = 2). 4. Temperatures outside this range will cause irreparable damage. 5. Per ASTM E 644.
- Self heating (in 0°C bath)
- ±0.003°C
- Drift3
- ±0.03°C at 0.01°C±0.04°C at 160°C
- Maximum immersion depth in dry Medium
- Full immersion
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther