Fluke
i3000 Flex 4PK
The i3000s Flex is an ac current clamp can be used to measure currents up to 3000 A when used in conjunction with oscilloscopes, recorders or data loggers.
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Send request for price
1
Payment methods:
General Specifications
- Weight
- 180 g (0.396 lb) (head)
- Output connection
- 0.5 m cable terminated with safety BNC connector. Supplied with 4mm safety plug adapter
- EMC standards
- EN 61326: 1998 +A1, A2, and A3
- Safety standards
- 600 Vrms, Category III, Pollution Degree 2
- Head cable diameter
- 14.3 mm (0.56in)
- Maximum conductor size
- 610 mm or 914 mm, depending on model
- Operating humidity
- 15% to 85% (non-condensing)
- Strong temperature range
- -40°C to +105°C (-40°F to 221°F) (head)
- Safety standards
- BS EN 61010-2-032: 2002
- Operating temperature range
- -20°C to +85°C (-4°F to 185°F) (electronics)
- Cable length (head to electronics)
- 2 m (6.56 ft)
- Safety standards
- BS EN 61010-031: 2002
- Safety standards
- BS EN 61010-1: 2001
- Weight
- 190 g (0.419 lb) (electronics)
- Safety standards
- Use of the probe on uninsulated conductors is limited to 600 V AC rms or DC and frequencies below 1 kHz
- Strong temperature range
- -20°C to +85°C (-4°F to 185°F) (electronics)
- Operating temperature range
- -20°C to +90°C (-4°F to 190°F) (head)
- Head bend radius
- 38.1 mm (1.5in)
- Head circumference
- 610 mm (24in)
Electrical Specifications
- Current ranges
- AC rms
- Phase error
- < ±1° (45 Hz to 65 Hz)
- Accuracy
- at +25°C
- Noise
- 8 mV AC rms (30 A)
- Current ranges
- 3000 A
- Output sensitivity (AC-coupled)
- 1 mV per A
- Current ranges
- 300 A
- Power supply
- 2 x AA/MN 1500/LR6 Alkaline, 400 hours, low battery indicator or dedicated external power supply
- Linearity
- ±0.2% of reading
- Phase error
- ±10° (at 20 kHz)
- Temperature coefficient
- ±0.08% of reading per °C
- Noise
- 2 mV AC rms (300 A, 3000 A)
- Linearity
- 10% to 100% of range
- External field
- ±1% of range
- Frequency range
- 10 Hz to 50 kHz (-3 dB)
- Position sensitivity
- with cable > 25 mm from the coupling
- Working voltage
- see safety standards section
- Load impedance
- 100 kΩ minimum
- Working voltage
- 600 V AC rms or DC
- Output sensitivity (AC-coupled)
- 10 m
- Accuracy
- ±1% of range (45 Hz to 65 Hz)
- Current ranges
- 30 A
- External field
- with cable > 200 mm from the head
- Output sensitivity (AC-coupled)
- 100 mV
- Position sensitivity
- ±2% of range
Related products
Other Categories
ActuatorsBlocksCables, Pipes & HosesCompressorsControlCouplings & FittingsCylinders & PistonsElectronicsFiltersHVACIndustrial PC's & HMIsLightingLinear techniqueMotorsPower SupplyPower TransmissionPumps & ValvesRenewable energyRoboticsSeals, Rings & ConnectorsSensors & Measuring DevicesTools and AccessoriesCNCOther