Azionamenti e motori

The TeSys T is a robust motor management system designed to provide full motor monitoring, control, and protection. It supports six communication protocols including Modbus™, CANopen, DeviceNet&trademark;, Profibus&trademark;, Ethernet/IP, and Modbus/TCP. This system consists of several components including the LTMR controller, expansion module, HMI, and software along with various accessories.The LTMR controller is the main component that manages basic functions such as ground current measurement, motor temperature monitoring, and three-phase current measurement. It also includes logic inputs and outputs for fault management. The expansion module provides additional inputs and measures voltage between phases for enhanced functionality.TeSys T offers high reliability and a long product life due to its advanced electronic protection and all-in-one design. It is suitable for harsh environments such as dusty atmospheres, marine applications, high vibration applications, and corrosive atmospheres. This motor management system is used in various industries including Metal/Mining/Mineral, Oil & Gas, Water Wastewater.The LTMR27MFM controller measures a current range of 1.35-27A with a supply voltage of 100-240 Vac and uses CANopen as the communication protocol. It measures temperature, phase current, imbalance current, average current, and earth-fault current. The dimensions are 61 mm (H) X 91 mm (W) X 122.5 mm (D) and it weighs 0.53 kg.

Altivar Soft Starter ATS480 is intended to start and stop asynchronous motors supplied from 208V to 690V. It meets the requirements of the most demanding applications in normal and heavy duty. With an operational rated current of 88A in normal duty, it supplies motor from 22kW to 75kW according to mains voltage. Designed for digitization, connected, optimized to meet cybersecurity standard, it simplifies project execution and maximizes the availability of applications. Its torque control (TCS) masters acceleration and deceleration. It efficiently stops high inertia application thanks to the dynamic braking and DC injection. It could be connected in-line or inside the delta to reduce its operational current. The embedded test routine simplifies the commissioning inside the delta. Its dimensions are 190mm (width) x 247mm (depth) x 290mm (height) and it weighs 8,3kg. Altivar Soft Starter ATS480 is designed to address process, infrastructures and industrial machines. It conforms to IEC/EN60947-4-1. It is certified CE, cULus, UKCA, CCC, RCM, EAC, and Marine certified DNV, ABS, BV and CCS. Display terminals, remote mounting kit, communication modules are common with Altivar Drives. Line chokes, DNV kits are common with ATS48. ATS480 is compatible with ATS48, it has same footprint, fixing, torque control algorithm, I/O, menus… The integration of Altivar Soft Starter ATS480 in EcoStruxure drastically simplifies architecture selection, detailed design and execution in automation and electrical systems. It is a Green Premium product designed to take the environmental considerations beyond current directives and regulations, compliant with RoHS and REACH.

This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line or delta connection. It has a rating of 250A and 230V to 440V, a rated power up to 132kW (400V to 440V in supply line) and up to 220kW (400V to 440V in motor delta connection). It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

TeSys island direct SIL starter, 3 poles, 25A/690V. Connected to a TPRBC bus coupler it controls, protects and monitors loads up to 25A and motors up to 11kW@400V / 15hp@480V. In association with a TPRSM001 module and an external safety device, it can be used for safety related systems conforming to IEC 61508. It provides motor protection functions including thermal overload (setting 0.5-25A, tripping class 5-30), phase loss, phase unbalance and reversal, long start (stall), locked rotor (jam), rapid cycle lockout, ground current detection. Monitoring of the load includes max/average voltages and currents, number of switching cycles, number of faults, active and reactive power/energy when associated to a TPRVM001 voltage module. Mounting on DIN rail together with the other modules of the TeSys island configuration. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).

The SIRIUS Soft Starter, model S2, is an advanced solution for motor control in various industrial settings. This device boasts a robust 45A rating and can handle up to 22 kW at 400 V. It operates within a temperature range of 40°C, ensuring reliable performance even in demanding conditions. The soft starter is compatible with a wide voltage range from 200-480 V AC and supports both AC and DC power at 24 V. It features screw terminals for easy wiring, along with thermistor motor protection to safeguard against overheating.

The SINAMICS G120C motor controller is designed to deliver exceptional performance, boasting a rated power of 1.5KW with an impressive 150% overload capacity for 3 seconds. This model is compatible with a voltage range of 380-480V and operates within a frequency range of 47-63Hz.Equipped with integrated filter class A I/O interface, this controller offers a comprehensive set of features including 6DI, 2DO, 1AI, and 1AO. It also incorporates the Safe Torque Off function for enhanced safety measures.The SINAMICS G120C is compatible with PROFIBUS-DP fieldbus technology, providing seamless integration and communication capabilities. It comes with a robust IP20/UL open type design, ensuring reliable performance in various environments.This controller is compact and lightweight, measuring 173x73x155mm (HxWxD), making it an ideal choice for applications that require space-saving solutions. It also features an external 24V power supply for added flexibility.

The Lexium range offers motion servo drives and servo motors, including the 8-pole AC servo motor. This product features a low moment of inertia with a maximum mechanical speed of 6000RPM and an IP54 parallel keyed shaft without holding brake. It is equipped with a single-turn (131072 points/turn) SinCos Hiperface® high-resolution absolute encoder, providing an angular shaft position precise to less than ±1.3 arc minutes. The BSH servo motor satisfies requirements for precision and high dynamic performance due to its low rotor inertia. The servo motor is compact and offers a high power density. It is a synchronous servo motor with a supply voltage of 480V, a continuous stall current of 6.2A, and a maximum continuous power of 3.64W. The shaft dimensions are 24mm (Diameter) x 50mm (Length). It is furnished with rotatable right-angled connectors for electrical connection. The product is an IP50 rated servo motor with dimensions of 276.5mm (Length) x 100mm (Width), centring collar dimensions of 3.5mm (Depth) x 95mm (Diameter) with a 115mm circle diameter of the mounting hole. It weighs 9.5kg. This servo motor is compatible with Lexium 32, Lexium 05, and Lexium 15 servo drives. It supports international standard 100mm flange mount with a natural convection cooling system. The encoder gives the absolute position of the motor so that flows can be synchronized and sends data from the servo motor to the servo drive, which provides automatic identification of the motor when the servo drive starts. The BSH servo motor features a 3-phase stator and neodymium iron boron (NdFeB) magnets. The casing is coated with RAL 9005 opaque black paint protective coating. It has a 4-point axial mounting flange. Cables and connectors are to be ordered separately.

The Schneider Electric TeSys LRD thermal overload relay is designed for use with TeSys D contactors. It offers protection for motors up to 55kW at 400V, thanks to its thermal range of 95-120A and tripping class of 10A. The relay also includes phase unbalance protection. This compact and lightweight relay is available worldwide and is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). It features manual test & reset buttons, automatic reset, trip auxiliary contact and flag indicator. The relay can be directly mounted on the bottom terminals of a Tesys contactor LC1D115 and D150 to form a compact starter. It is temperature compensated for accurate protection and can be completed with terminal blocks for separate mounting (LAD7B, LAD96) and remote control devices (LAD703, LA7D03).

This servo motor is categorized under the Lexium 32 series, designed for precise motion control applications. Operating at a maximum mechanical speed of 8000 RPM, it features a keyed shaft and complies with an IP54 protection rating. The motor does not include a holding brake, enhancing its suitability for high-performance scenarios.Equipped with a 128-bit absolute single-turn encoder, it ensures accurate feedback with a resolution of 131072 points per turn. The motor's output power is rated at 240V, with a continuous stall current of 2.85A and a continuous power output of 1.05W. With a weight of 1.6kg and dimensions that include a flange size of 70x70mm, the motor integrates easily into various setups.Designed for applications such as printing, packaging, handling, clamping, and material processing, this motor is built with two rotatable right-angled connectors. It features a mechanical design that allows for a natural convection cooling system, ensuring operational stability under various conditions.This model adheres to several standards, including EN 61800-5-1 and EN 60034-1, and is compatible with specific Lexium 32 servo drives, namely LXM32nU90M2 and LXM32nD18M2. Its assembly supports an international standard flange mounting, making it versatile for industrial use.

The M200D Technology module is designed as a reversing motor starter, enabling mechanical switching for AC-3 applications. It operates within a current range of 0.15 A to 2.00 A, supporting a power output of 0.75 kW at 400 V. This device features electronic overload protection facilitated by thermistor technology (THERMOCLICK/PTC), ensuring reliable performance without brake contact.This module is equipped with four digital inputs and two digital outputs (Han Q4/2 - Han Q8/0), allowing for manual on-site operation and integration with a key-operated switch. Communication capabilities include support for PROFIBUS and PROFINET protocols, enhancing its compatibility within industrial networks. The product adheres to a degree of protection of IP65 and NEMA 12 standards, making it suitable for demanding environments.Notably, the M200D module includes temperature-compensated overload protection, a significant feature for maintaining operational integrity. Its compact dimensions of 148 mm in depth, 294 mm in width, and 215 mm in height facilitate installation in various settings.

This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The brushless servo motor features a high moment of inertia with maximum mechanical speed of 5000RPM and IP65 parallel keyed shaft without holding brake. It is equipped with a 20bit single-turn absolute encoder, optimized in terms of speed of rotation (3000RPM). It is a second generation servo motors suitable for a wide variety of applications due to the different levels of motor inertia offered. It has a rated supply voltage of 220V, a continuous stall current of 1.11A and a continuous power of 200W. The shaft dimensions are 14mm (Diameter) x 30mm (Length). It is furnished with free lead for electrical connection. It is an IP50 (IM V3) and IP65 (IM B5, IM V1) rated product. Its dimensions are 104mm (Length) x 60mm (Width), centring collar dimensions are 5.5mm (Depth) x 50mm (Diameter) with 70mm circle diameter of the mounting hole. It weighs 1.02kg. This product is compatible with Lexium 28 and Lexium 26D servo drives. It supports Asian standard 60mm flange mount with a natural convection cooling system. Lexium 28 and Lexium BCH2, the optimized servo bundle for all motion control solutions are cost effective, energy efficient and embedded safety. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.

This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 8000RPM and smooth shaft end with holding brake. It is an equipped with a single-turn SinCos Hiperface® feedback with 32,768 points/turn speed feedback resolution. It is a servo motor with a rated supply voltage of 480V, a continuous stall current of 1.78A and a continuous power of 1.05W. The shaft dimensions are 11mm (diameter) x 23mm (length). It is furnished with rotatable right angled connectors for electrical connection. It is an IP54 rated product. The length of this product is 161mm and the centering collar dimensions are 2.5mm (depth) x 60mm (diameter) with 82mm mounting hole. It weighs 2.6kg. This range is compatible with Lexium 32 servo drives. This product is compatible with LXM32.U60N4 at 400V to 480V three phase and LXM32.D12N4 at 400V to 480V three phase. It supports 70mm international standard flange mount with a natural convection cooling system. Lexium 32 is a servo drive range provides drive and motor combination that has exactly the right power, performance and functionality. The Lexium 32 range of servo drives includes four servo drive models with power ratings from 0.15kW to 11kW and the servo motor ranges BMH and BSH series.

The SIRIUS M200D motor starter is a robust solution for industrial applications, offering AS-Interface direct online starter communication. This standard mechanical switching device is designed to handle AC power up to 3 phases and 5.5 kW at 400 V, with a current range of 1.5 A to 12.00 A. Equipped with electronic overload protection, this motor starter ensures safe operation by monitoring the current draw and shutting down if it exceeds predefined limits. The thermistor incorporated in the design provides thermal protection, utilizing THERMOCLICK / PTC technology without brake contact. The SIRIUS M200D motor starter supports 4 DI (Digital Input) and 1 DO (Digital Output) AS-i communication. It is compatible with Han Q4/2 -H and Han Q8/0 connectors, making it a versatile choice for various industrial automation systems.

TeSys LRD thermal overload relay, 6A/690V, thermal setting range 4-6A, tripping class 10A, for protection of 3-phase motors 2.2kW@400V. Differential device with phase failure and load unbalance detection. It provides a thermal adjustement dial, a manual-automatic reset selector, a test selector for simulation of a tripping, reset and stop buttons, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a transparent cover lockable by sealing. Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1D09-D38. Mounting on DIN rail or screw fixing, separated from the contactor, with use of a terminal block LAD7B106 (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC, ATEX, Marine), Green Premium compliant (RoHs/Reach).

This product is part of the Lexium 62 & Motors range, an offer of servo drives. The single drive features SERCOS III physical interface. It offers 2 digital/2 touch probe inputs and 2 digital outputs. It is a single drive with a rated supply voltage of 24VDC, a continuous output current of 5A at 4kHz and a continuous power of 2.4kW. It is furnished with connectors for electrical connection. It is an IP20 rated product. It weighs 3kg. It is suitable for general machine control, packaging machine automation and material handling applications. This product is certified by CE, CSA, EAC, TUV and UL. It meets IEC 61508, EN/ISO 13849-1, EN 61800-5-1, IEC 62061, EN 62061, CSA C22.2 No 14 and EN 61800-5-2 standards. This product is compatible with servo motor SH3 (70mm, 2 motor stacks), servo motor SH3 (70 m, 3 motor stacks), servo motor SH3 (100mm, 1 motor stack). It includes accessory kit. Lexium 62 multi-axis servo systems can be controlled with all PacDrive 3 LMC motion controllers of the Pro/Pro2 and Eco series via SERCOS communication. Multi axis servo drives and servo motors from 0.95kW to 24kW for PacDrive based automation solutions.

L'Allen Bradley Bulletin MPL è un servomotore rotativo a bassa inerzia senza spazzole progettato per applicazioni di automazione impegnative che richiedono posizionamento reattivo, movimento fluido e ripetibilità affidabile. La sua compatta costruzione metrica IEC supporta un'integrazione efficiente nei progetti di macchina, dove spazio, prestazioni dinamiche e flessibilità di installazione sono importanti.Questo motore combina un albero con chiavi, fori di montaggio liberi e un connettore SpeedTEC DIN rotante ad angolo retto per semplificare l'integrazione meccanica ed elettrica. Il feedback dell'encoder assoluto multi-giro supporta una accurata ritenzione della posizione e un controllo affidabile, mentre il freno DC a 24V aggiunge la capacità di mantenimento per un funzionamento più sicuro in applicazioni verticali o sensibili al carico. Progettato per sistemi servo industriali, è adatto a ambienti che richiedono un controllo del movimento preciso e un robusto tempo di funzionamento della macchina.

This Altivar Process ATV900 variable speed drive can feed 3-phase synchronous and asynchronous power motors. It is suitable for motors with power rating up to 30kW/40hp for applications requiring slight overload (up to 120%). It is suitable for motors with power rating up to 22kW/30hp for applications requiring significant overload (up to 150%). It works at a rated supply voltage from 380V to 480V AC. This variable speed / frequency drive (VSD / VFD) is specifically designed for industrial processes. In the following market segments, oil and gas, mining, minerals and metals, food and beverage water and wastewater. It offers high motor performance on any motor and total control of any kind of coupling in master/slave applications. Network services help ensure operation continuity even in case of connection breakdown. Web server and data logging help reduce downtime through fast troubleshooting and preventive maintenance. Its advanced connectivity, including EtherNet/IP and Modbus TCP, allows deep integration into automation architectures. It is designed to be mounted in vertical position (+/- 10 °) on a wall.

The BMH model servo motor is part of the Lexium 32 series, which caters to motion servo drives with power ratings between 0.15 kW and 7 kW. This unit is characterized by its smooth shaft design and lack of a holding brake, making it suitable for various high-performance applications. Operating at a rated supply voltage of 480 V, it features a continuous stall current of 2.94 A and a continuous power output of 1.51 W.With a maximum rotational speed of 8000 RPM, the motor includes a SinCos Hiperface® encoder that provides a resolution of 32768 points per turn, facilitating precise data transmission to the servo drive. The motor's construction includes a robust 10-pole design with neodymium iron boron (NdFeB) magnets, ensuring efficiency in operation.Dimensions include a length of 154 mm, width of 70 mm, and a weight of 2.3 kg. The motor features a centring collar depth of 2.5 mm and a diameter of 60 mm. Mounting options adhere to international standards, with a flange size of 70 mm and a circle diameter for mounting holes measuring 82 mm.The IP54 rating indicates protection against dust and limited water exposure, while the natural convection cooling system allows for effective thermal management. This servo motor is compatible with Lexium 32 servo drives and is equipped with rotatable right-angled connectors for electrical connections. The absence of a second shaft end further streamlines the design, making it versatile across various applications.

This soft starter can feed 3-phase asynchronous motors in supply line or delta connection. It has a rating of 75A and 230V to 440V, a rated power up to 37kW (400V to 440V in supply line) and up to 75kW (440V in motor delta connection). It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

Avviatore motore SIRIUS M200D Comunicazione AS-i: Avviatore reversibile standard AS-Interface Commutazione meccanica AC-3, 0,75KW / 400 V 0,15 A...2,00 A Protezione da sovraccarico elettronica Termistore: THERMOCLICK / PTC con contatto freno 400 V AC 4 DI / 1 DO AS-i Han Q4/2 - Han Q8/0 con funzionamento manuale sul posto e interruttore a chiave