MS-OPS6M2-DV-IV

Specifications

NETXASC

Combines a Maestro switch with a passive infrared occupancy sensor. Detects the heat from occupants moving within an area to determine whether the space is occupied. Based on the feedback from the sensor, the occupancy sensing switch will adjust the load accordingly. Passive infrared sensors with exclusive Lutron XCT Technology for fine motion detection. 180 degree sensor field-of-view. Up to 30 ft x 30 ft (9 m x 9 m) [900 ft2 (81 m2)] major motion coverage and 20 ft x 20 ft (6 m x 6 m) [400 ft2 (36 m2)] minor motion coverage. Can be set to auto-on/auto-off or manual-on/auto-off. Adjustable timeout (1, 5, 15, or 30 minutes) and high/low sensitivity adjustment. Occupancy sensing switch loads: incandescent, halogen, ELV, MLV, CFL, LED, magnetic fluorescent, electronic fluorescent, and fan. Ground wire required.

NETXCAT

Lutron Maestro Dual Voltage Motion Sensor switch, 6-Amp, Single-Pole, Ivory

NETXPOL

Lutron Online Policy - PUBLIC

NETXMKG

Coordinating Claro Wall Plate and accessories sold separately. Lutron's Maestro Occupancy Sensing Switch gives you one less thing to worry about, turning the lights on and off when you enter and leave the room. It's a simple, easy, and low cost way to save energy and add light automation to your home. Install a Maestro Occupancy Sensing Switch and lights turn on when you enter the room, and then turn off automatically after you leave. The switch works just like a Lutron Maestro switch, allowing you to easily tap the switch to turn the lights on and then tap again to turn the lights off. Equipped with ambient light detection, you can customize your occupancy sensing switch to detect daylight so lights don't turn on with enough natural light in your room. Keeping the sleek design of the Maestro family, Lutron sensors will match the decor of any room in your home. Install it in the laundry room for added convenience when your hands are full, or in the kids' rooms and never worry about lights being left on by mistake. Maestro Occupancy Sensing switches work with incandescent, halogen, magnetic and electronic low-voltage, non-dim LED, and non-dim fluorescent bulbs, as well as general purpose fans. This occupancy sensing switch can also be easily programmed to function as a vacancy (manual-on) sensor.

NETXMB1

Coordinating claro wall plate and accessories sold separately

NETXMB2

Multi-location, single pole/3-way

NETXMB3

Up to 6-Amps for lighting (120 Volts/277 Volts) and 3-Amps for fans

NETXMB4

Works with incandescent, halogen, magnetic and electronic low-voltage and non-dim LED and non-dim fluorescent bulbs, as well as general purpose fans

NETXMB5

Automatically turn lights on and off based on room occupancy

NETXMB6

Requires ground wire

NETXMB7

Uses advanced XCT sensing technology, offering the most reliable on/off performance up to 30 ft.

NETXMB8

Senses daylight, so lights don't turn on inadvertently (optional)

NETXMB9

Can be switched to vacancy mode (manual-on, auto off)

Class Code

ED-LSR

Application

Lighting Control

Body

Plastic

Enclosure

Plastic

Environmental Conditions

0 to 90% humidity, non-condensing. Indoor use only.

Load

6 A@120 to 277 VAC lights/3 A@120 VAC fan/3 A@120 VAC light and fan

Mounting

Wallbox

Operating Temperature

32 to 104 F | 0 to 40 C

Sensing Range

900 ft2 (82 m2) major motion coverage/400 ft2 (36 m2) minor motion coverage

Sensor

Passive infrared motion detection with dependable Lutron XCT technology

Supply Voltage

120 to 277 VAC

Type

Occupancy sensor switch, multi-location/3-way/single-pole, dual-voltage

Documents