H3CA-A
Solid-state Timer, 48×48×89 mm, 12 to 240VDC, 24 to 240 VAC
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
Ratings / Performance
- Rated supply voltage
- 24 to 240 VAC 50/60 Hz
- Rated supply voltage
- 12 to 240 VDC
- Operating voltage range
- 90% to 110% of rated supply voltage (21.6 to 264 VAC/10.8 to 264 VDC)
- Power consumption
- Approx. 0.2 to 4VA
- Power consumption
- Approx. 0.2 to 2W
- Time ranges(Number of ranges)
- 7
- Time ranges
- 0.1 s to 99.9 s / 1 s to 999 s / 0.1 min to 99.9 min / 1 min to 999 min / 0.1 h to 99.9 h / 1 h to 999 h / 10 h to 9990 h
- Select method
- Thumbwheel Switch
- Input signals
- Start, Reset, Gate, Check
- Input method
- No-voltage input
- Minimum input signal width
- 0.05 s(Reset, Gate)
- Output modes
- A (ON delay)
- Output modes
- B (Repeat cycle)
- Output modes
- C (Signal ON/OFF delay)
- Output modes
- D (Signal OFF delay)
- Output modes
- E (Interval)
- Output modes
- F (One shot flicker)
- Output modes
- G (Signal ON/OFF delay)
- Output modes
- H (Signal OFF delay)
- Control output (Contact output)
- Type: Time-limit contact: SPDT
- Control output (Contact output)
- Switching capacities (Resistive load): 3 A at 250 VAC
- Control output (Contact output)
- Switching capacities (Inductive load): 1 A 250 VAC (cos phi=0.4) / 2.5 A 24 VDC ( L/R=7 ms)
- Control output (Contact output)
- Minimum applicable load: 10 mA at 5 VDC (failure level: P)
- Reset system
- Self-reset/External reset
- Power reset
- Reset time: 0.5 s max.
- Display method
- LCD
- Ambient temperature
- Operating: -10 to 55 °C
- Ambient temperature
- Storag: -25 to 65 °C (with no icing or condensation)
- Ambient humidity
- Operating: 35 to 85%RH
- Ambient humidity
- Storag: 35 to 85%RH
- Accuracy of operating time
- +/- 0.3% +/- 0.05 s (The values are based on the set value.)
- Setting error
- +/- 0.5% +/- 0.05 s (The values are based on the set value.)
- Influence of voltage
- +/- 0.3% +/- 0.05 s (The values are based on the set value.)
- Influence of temperature
- +/- 0.3% +/- 0.05 s (The values are based on the set value.)
- Insulation resistance
- 100 MΩ min. (at 500 VDC)
- Insulation resistance
- between current-carrying terminals and exposed non-curernt-carrying metal parts / between control output terminals and operating circuit / between non-continuous contacts
- Dielectric strength
- between current-carrying metal parts and non-curernt-carrying metal parts: 2000
- Dielectric strength
- between control output terminals and operating circuit: 2000
- Dielectric strength
- between non-continuous contacts: 1000
- Impulse withstand voltage
- 5 kV
- Noise immunity
- Between power terminals: +/- 2 kV(0 to 360 degrees)
- Noise immunity
- Between input terminals: +/- 600 V(0 to 360 degrees)
- Noise immunity
- Square-wave noise by noise simulator (Pulse width: 100 ns/1 us, Rise: 1-ns)
- Vibration resistance (Destruction)
- 10 to 55 Hz, 0.75 mm single amplitude in each 3 directions for 1 hour
- Vibration resistance (Malfunction)
- 10 to 55 Hz 0.5 mm single amplitude in each 3 directions for 10 min
- Shock resistance (Destruction)
- 1000 m/s**2, in each 6 directions (3 axes) 3 times
- Shock resistance (Malfunction)
- 100 m/s**2, in each 6 directions (3 axes) 3 times
- Mechanical life
- 10000000 operations min. (under no load at 1800 operations/h)
- Electrical life
- 100000 operations min. (3 A at 250 VAC resistive load at 1800 operations/h)
- Degree of protection
- Panel surface: IP40
- Mounting method
- Flush mounting / Surface mounting
- External connection method
- 11-pin round socket
- Case color
- Light gray (Munsell 5Y7/1)
- Accessory (sold separately)
- Y92A-48D: Soft Cover
- Accessory (sold separately)
- Y92A-48B: Hard Cover
- Accessory (sold separately)
- Y92F-30: Flush Mounting Adapter
- Accessory (sold separately)
- Y92F-70: Flush Mounting Adapter
- Accessory (sold separately)
- Y92F-71: Flush Mounting Adapter
- Weight
- Approx. 110g