Mencom

MAC connectors, sometimes referred to as Micro-AC, use a 1/2-20UN2 coupling nut, a dual keyway, and different color code than the MDC connectors. Although they are similar in size to the MDC (M12) connectors, they are strategically different to prevent wiring errors. These easy to use plug and play connectors are offered with molded cable, as field wired connectors, panel mount receptacles, and accessories with choices of cable jackets and connector ends to meet your specific requirements.

MIN size III (1-1/8") connectors provide easy plug and play connectivity for a wide range of applications that require 9, 10, 12, or 19 contacts. Mencom offers many combinations of molded cables, field wired connectors, and panel mount receptacles with choices of cable jackets and connector ends to meet your specific requirements.

MIN size I (7/8") connectors provide easy plug and play connectivity for a wide range of applications that require 2-6 contacts. Mencom offers many combinations of molded cables, field wired connectors, and panel mount receptacles with choices of cable jackets and connector ends to meet your specific requirements.

Plastic Cable Glands (PCG) provide superior strain relief for cables and provide IP68 protection against dust and water. Mencom offers a large selection of cables glands in Metric, PG, and NPT thread choices. Sealing Grommets for Metric and PG sized openings are also available.

Reducers, Enlargers, Thread Converters, Blanking Plugs, and Multi-hole Grommets are just a few of the accessories Mencom inventories to assist in providing cable entry solutions. Whether going from PG to Metric, Metric to NPT, or just plugging up an unused hole, Mencom carries the products you need.

JDC junction blocks provide convenient connectivity for multiple devices using the MDC (M12) connector. The simple plug and play design of these products drastically reduce installation time and minimizes down time. These junction blocks are offered in 4, 6, 8, 10, and 12 port configurations with a wide variety of home run options. The multi-port blocks are readily available with 3, 4, or 5 pins loaded per port, and with no LED, PNP, or NPN circuitry.

Plastic Cable Glands (PCG) provide superior strain relief for cables and provide IP68 protection against dust and water. Mencom offers a large selection of cables glands in Metric, PG, and NPT thread choices. Sealing Grommets for Metric and PG sized openings are also available. NPT style cable glands are not supplied with nuts.

A Panel Interface Connector (PIC) is a device that typically mounts to the outside of a control panel housing a PLC, computer, or other type of programmable device. Once in place, the PIC, which houses convenient pass through connections, allows the user to interface with the computer, PLC, or other devices inside the control panel. These convenient access ports eliminate the need to open the panel door, creating a safer environment on the shop floor, and helping the user adhere to the safety standards set forth by NFPA 70E. With well over 2000 designs, Mencom is sure to have the configuration you need. If we do not, just contact one of our design engineers and we will work with you to create the solution you need.

A Panel Interface Connector (PIC) is a device that typically mounts to the outside of a control panel housing a PLC, computer, or other type of programmable device. Once in place, the PIC, which houses convenient pass through connections, allows the user to interface with the computer, PLC, or other devices inside the control panel. These convenient access ports eliminate the need to open the panel door, creating a safer environment on the shop floor, and helping the user adhere to the safety standards set forth by NFPA 70E. With well over 2000 designs, Mencom is sure to have the configuration you need. If we do not, just contact one of our design engineers and we will work with you to create the solution you need.

Mencom offers high quality NPT, PG, and Metric threaded nuts as accessories for our receptacles and cable glands. Nuts are available in Plastic, Nickel Plated Brass, Zinc, and some Stainless Steel.

Mencom offers high quality NPT, PG, and Metric threaded nuts as accessories for our receptacles and cable glands. Nuts are available in Plastic, Nickel Plated Brass, Zinc, and some Stainless Steel.

JDC junction blocks provide convenient connectivity for multiple devices using the MDC (M12) connector. The simple plug and play design of these products drastically reduce installation time and minimizes down time. These junction blocks are offered in 4, 6, 8, 10, and 12 port configurations with a wide variety of home run options. The multi-port blocks are readily available with 3, 4, or 5 pins loaded per port, and with no LED, PNP, or NPN circuitry.

MDC connectors, sometimes referred to as Micro-DC, use an M12 coupling nut and single keyway. These versatile connectors are easy to use and provide plug and play solutions to a wide range of applications. Mencom offers molded cable, field wired connectors, panel mount receptacles, and accessories with choices of cable jackets and connector ends to meet your specific requirements. Some options for the cordsets include, PVC jacket, PUR jacket, TPE jacket, Hi-Flex cable, and shielded cable. Receptacles come in a wide range of mounting styles and threads; including Metric, PG, and NPT.

MIN size II (1") connectors provide easy plug and play connectivity for a wide range of applications that require 6, 7, or 8 contacts. Mencom offers many combinations of molded cables, field wired connectors, and panel mount receptacles with choices of cable jackets and connector ends to meet your specific requirements.

MIN Power connectors provide easy plug and play connectivity for applications up to 18 amps. Mencom offers molded cables and panel mount receptacles with 3, 4, or 7 contacts.

Reducers, Enlargers, Thread Converters, Blanking Plugs, and Multi-hole Grommets are just a few of the accessories Mencom inventories to assist in providing cable entry solutions. Whether going from PG to Metric, Metric to NPT, or just plugging up an unused hole, Mencom carries the products you need.

Plastic Cable Glands (PCG) provide superior strain relief for cables and provide IP68 protection against dust and water. Mencom offers a large selection of cables glands in Metric, PG, and NPT thread choices. Sealing Grommets for Metric and PG sized openings are also available.

Mencom offers high quality NPT, PG, and Metric threaded nuts as accessories for our receptacles and cable glands. Nuts are available in Plastic, Nickel Plated Brass, Zinc, and some Stainless Steel.

JDC junction blocks provide convenient connectivity for multiple devices using the MDC (M12) connector. The simple plug and play design of these products drastically reduce installation time and minimizes down time. These junction blocks are offered in 4, 6, 8, 10, and 12 port configurations with a wide variety of home run options. The multi-port blocks are readily available with 3, 4, or 5 pins loaded per port, and with no LED, PNP, or NPN circuitry.

MIN size I (7/8") connectors provide easy plug and play connectivity for a wide range of applications that require 2-6 contacts. Mencom offers many combinations of molded cables, field wired connectors, and panel mount receptacles with choices of cable jackets and connector ends to meet your specific requirements.