#1 Konferencja dla Branży Automatyki Przemysłowej| 16-18 czerwca 2025| Hilton Warsaw City, Warszawa, PolskaDowiedz się więcej
Filtry
Obecnie szukasz produktów wyłącznie związanych z marką Warner Electric. Jeśli chcesz przeglądać wszystkie dostępne produkty, skorzystaj z naszej wyszukiwarki produktów
This Electro Disk Brake Replacement Part (5216-101-028) features a Magnet Friction Pad.
This Electro Disk Brake Replacement Part (5216-101-028) features a Magnet Friction Pad.
This Electro Disk Brake Replacement Part (5216-631-010) features a MTB II Magnet.
This Electro Disk Brake Replacement Part (5216-631-010) features a MTB II Magnet.
The CBC-100 and CBC-150 series are UL listed, conduit box mounted controls for 90 volt clutches and brakes. Models are available for either 120 VAC or 220/240 VAC input. These On - Off Controls (6003-448-103) Product Series Feature 1 channels, and an input of 220/240 VAC, 50/60 Hz.
The CBC-100 and CBC-150 series are UL listed, conduit box mounted controls for 90 volt clutches and brakes. Models are available for either 120 VAC or 220/240 VAC input. These On - Off Controls (6003-448-103) Product Series Feature 1 channels, and an input of 220/240 VAC, 50/60 Hz.
The TCS-605-5 pivot point sensor closes the feed back loop to the tension control by sensing dancer roll position. This device is a five-turn potentiometer with a resistance of 1KΩ for festooned dancer systems, with a 300° rotational range.
The TCS-605-5 pivot point sensor closes the feed back loop to the tension control by sensing dancer roll position. This device is a five-turn potentiometer with a resistance of 1KΩ for festooned dancer systems, with a 300° rotational range.
This Electro Disk Brake Replacement Part (5216-631-004) features an Old Style Magnet.
This Electro Disk Brake Replacement Part (5216-631-004) features an Old Style Magnet.
Warner Electric ERS Brakes are pre-assembled and burnished at the factory. The engineering is built-in. Each unit is checked to ensure full rated torque right out-of-the-box. Just secure the hub, bolt down the brake and wire it up. This brake (5155-170-002) features a 24 DC voltage, a 15 ft-lb static torque, and a max. speed of 3600 RPM.
Warner Electric ERS Brakes are pre-assembled and burnished at the factory. The engineering is built-in. Each unit is checked to ensure full rated torque right out-of-the-box. Just secure the hub, bolt down the brake and wire it up. This brake (5155-170-002) features a 24 DC voltage, a 15 ft-lb static torque, and a max. speed of 3600 RPM.
Each CB Series unit is a completely self-contained, packaged clutch/brake assembly designed to start and stop a load rapidly and accurately without any cumulative error. In fact, at speeds up to 1800 rpm, loads are started and stopped within +1/2° per revolution. This unit (305-17-007) features a bore size of 0.5 in and a 115 VAC voltage.
Each CB Series unit is a completely self-contained, packaged clutch/brake assembly designed to start and stop a load rapidly and accurately without any cumulative error. In fact, at speeds up to 1800 rpm, loads are started and stopped within +1/2° per revolution. This unit (305-17-007) features a bore size of 0.5 in and a 115 VAC voltage.
Each CB Series unit is a completely self-contained, packaged clutch/brake assembly designed to start and stop a load rapidly and accurately without any cumulative error. In fact, at speeds up to 1800 rpm, loads are started and stopped within +1/2° per revolution. This unit (316-17-005) features a bore size of 20 mm and a 24 VDC voltage.
Each CB Series unit is a completely self-contained, packaged clutch/brake assembly designed to start and stop a load rapidly and accurately without any cumulative error. In fact, at speeds up to 1800 rpm, loads are started and stopped within +1/2° per revolution. This unit (316-17-005) features a bore size of 20 mm and a 24 VDC voltage.
The CBC-801 is a basic on-off power supply that provides full voltage to a 90 volt clutch or brake and is activated by an external switch. This type of power supply is sufficient for many clutch/brake applications. These On - Off Controls (6001-448-004) Product Series Feature 2 channels, and an input of 120 VAC, 50/60 Hz.
The CBC-801 is a basic on-off power supply that provides full voltage to a 90 volt clutch or brake and is activated by an external switch. This type of power supply is sufficient for many clutch/brake applications. These On - Off Controls (6001-448-004) Product Series Feature 2 channels, and an input of 120 VAC, 50/60 Hz.
This Electro Disk Brake Replacement Part (5216-101-003) features a Magnet Friction Pad.
This Electro Disk Brake Replacement Part (5216-101-003) features a Magnet Friction Pad.
This Electro Disk Brake Replacement Part (5216-101-025) features 10 inch MTB II Armature.
This Electro Disk Brake Replacement Part (5216-101-025) features 10 inch MTB II Armature.
The MCS-103-1 is an enclosed control complete with a cover and mounting provisions. A brake and clutch may be operated separately with this control — or up to four units, two at a time. The external wiring is connected to the terminal strip located behind the cover. These Adjustable Torque Controls (6010-448-002) Product Series Feature 2 channels, and an input of 120 VAC, 50/60 Hz.
The MCS-103-1 is an enclosed control complete with a cover and mounting provisions. A brake and clutch may be operated separately with this control — or up to four units, two at a time. The external wiring is connected to the terminal strip located behind the cover. These Adjustable Torque Controls (6010-448-002) Product Series Feature 2 channels, and an input of 120 VAC, 50/60 Hz.
