Levtech LSP-IAC-2005

Configurable Signal Converter

931S-A481 : Configurable Analog Input to Configurable Analog Output; Single Channel; 9..60VDC powered; DIP& Buttons

Separation amplifier 24 V AC/DC, 3-way separation input: 4-20 mA output: 0-10 V screw terminal

Separation amplifier 24 V AC/DC, 3-way separation input: 4-20 mA output: 0-20 mA Spring-type terminal (push-in)

Separation amplifier 24 V AC/DC, 3-way separation input: 4-20 mA output: 0-20 mA screw terminal

Separation amplifier 24 V AC/DC, 3-way separation input: 4-20 mA output: 4-20 mA screw terminal

Separation amplifier 24 V AC/DC, 3-way separation input: 4-20 mA output: 0-10 V Spring-type terminal (push-in)

Separation amplifier 24 V AC/DC, 3-way separation input: 4-20 mA output: 4-20 mA Spring-type terminal (push-in)

JUMPFLEX® signal conditioner; isolation amplifier; fixed for current and voltage signals - in: 4 … 20 mA, out: 0 … 10 V

Passive Isolator, 1-channel signal

Transmitter Power Supply, 1-channel

Signal Converter, 1-channel signal

The Signal Converter and Splitter converts and splits 4-20mA and 0-10V signals, allowing a transmitter to connect to both a Programmable Logic Controller (PLC) and a display unit. It comes in different models, identified by unique order codes, to suit various requirements. The device features four-way isolation, 3500VDC isolation, TS-35 DIN rail mounting, ±0.1% accuracy, an IP40 case, screw terminals, a power LED, a 24VDC supply voltage, and is factory-calibrated. It is manufactured in the EU for industrial operations.

The Signal Converter and Splitter converts and splits 4-20mA and 0-10V signals, allowing a transmitter to connect to both a Programmable Logic Controller (PLC) and a display unit. It comes in different models, identified by unique order codes, to suit various requirements. The device features four-way isolation, 3500VDC isolation, TS-35 DIN rail mounting, ±0.1% accuracy, an IP40 case, screw terminals, a power LED, a 24VDC supply voltage, and is factory-calibrated. It is manufactured in the EU for industrial operations.

The Isolated Splitter for Analog Signals is a vital component in automation systems, facilitating the connection of an analog signal from a measurement device to two processing units. It supports 0-5V signals, offering dual output functionality. Has four-way Galvanic Isolation, reducing interference and ground potential differences. 3500VDC isolation, TS-35 DIN rail mounting.

The Signal Converter and Splitter converts and splits 4-20mA and 0-10V signals, allowing a transmitter to connect to both a Programmable Logic Controller (PLC) and a display unit. It comes in different models, identified by unique order codes, to suit various requirements. The device features four-way isolation, 3500VDC isolation, TS-35 DIN rail mounting, ±0.1% accuracy, an IP40 case, screw terminals, a power LED, a 24VDC supply voltage, and is factory-calibrated. It is manufactured in the EU for industrial operations.

The Signal Converter and Splitter converts and splits 4-20mA and 0-10V signals, allowing a transmitter to connect to both a Programmable Logic Controller (PLC) and a display unit. It comes in different models, identified by unique order codes, to suit various requirements. The device features four-way isolation, 3500VDC isolation, TS-35 DIN rail mounting, ±0.1% accuracy, an IP40 case, screw terminals, a power LED, a 24VDC supply voltage, and is factory-calibrated. It is manufactured in the EU for industrial operations.

The Galvanic Isolator is an analog signal separator for communication between transmitters and PLCs. Processes 0-10V analog signals, reduces interference, and addresses ground potential differences. IP40-rated case. TS-35 DIN rail installations. It has three-way, 3500VDC isolation. +/-0.1% accuracy

The LSP-LVS Limit Value Switch operates with 0-10V or 0-20mA analog input and includes two relay outputs that activate or deactivate at pre-defined setpoints. Its WiFi capability allows for easy configuration changes through a web interface accessible from any WiFi-enabled device. This product is Smart relay which activates according to the analog input.

The USB to RS422 Converter is an industrial-grade device for data transfer between a computer’s USB port and RS422 serial communication. It includes optical isolation, overvoltage and short circuit protection, and a status LED. Powered by USB with the Ft232 processor, it offers reliability and performance. Its wall-mountable aluminum case is suitable for industrial environments. Easy to install and maintain, it’s a feature-rich solution for industrial communication.

The Modbus IO Module is an input/output expansion module, offering 2 variants: 4 analog inputs (AI) and 4 digital outputs (DO), 4 digital inputs (DI) and 4 digital outputs (DO)</li>. The module can be connected to PLC or any device that can communicate on MODBUS RTU protocol.

The USB to RS485 Converter facilitates serial data transfer through USB, adding a serial communication port to the system. It features optical isolation, making it suitable for factory environments and other applications. Its capabilities include two-way communication, short circuit protection, and a wall-mountable aluminum case, enhancing versatility and reliability.