Phoenix Contact 1552272

The SACC-DSI-FSD-4CON-L180/12 is a rear-mounted device connector designed for Ethernet connectivity, featuring a 4-position M12 SPEEDCON socket. This connector is equipped with a Pg9 thread and incorporates a straight solder connection, distinguished by its 12 mm long solder pins.

Manufactured in Germany, the connector is constructed with a GD-Zn housing and nickel surface treatment, ensuring durability. The contact carrier is made of PA 6.6, while the contacts are composed of CuZn with a gold-plated surface. The assembly allows for wave soldering and supports a nominal voltage of 250 V and a nominal current of 4 A.

With a rated surge voltage of 2.5 kV and an insulation resistance of ≥ 100 MΩ, this device meets stringent electrical requirements. It has a contact resistance of ≤ 3 mΩ and is rated for over 100 insertion/withdrawal cycles. The connector is designed to operate in temperatures ranging from -25 °C to 85 °C, making it suitable for various industrial applications.

In terms of protection, the connector achieves an IP67 rating when plugged in, ensuring resistance to dust and water ingress. The tightening torque is specified at 2 Nm to 3 Nm during installation, and careful consideration should be given to potential contamination when the connector is not locked. The product key for this item is ABQEHL, and it adheres to the standards set by IEC 61076-2-101.