- Device Connection
- in the motor supply line
- Network Frequency
- 45...66 Hz
- Minimum Switching Current
- 100 mA 12 V DC relay outputs)
- [Uc] Control Circuit Voltage
- 230 V - 15...10 % 50/60 Hz
- Height
- 425 mm
- Discrete Output Type
- relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O || relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
- Maximum Switching Current
- 5 A 250 V AC resistive 1 relay outputs || 5 A 30 V DC resistive 1 relay outputs || 2 A 250 V AC inductive 0.4 20 ms relay outputs || 2 A 30 V DC inductive 7 ms relay outputs
- Discrete Input Voltage
- 24 V <= 30 V
- Marking
- CE
- Power Range
- 55-100 kW 200-240 V 3 phase || 110-220 kW 380-440 V 3 phase || 110-220 kW 480-500 V 3 phase
- Net Weight
- 33 kg
- Output Current
- 0.4...1 Icl adjustable
- Installed Device
- 31
- Connector Type
- 1 RJ45
- Motor Starter Type
- soft starter
- Communication Data Link
- serial
- Function Available
- internal bypass
- Discrete Output Number
- 2
- Control Circuit Consumption
- 20 W
- Communication Port Protocol
- Modbus
- Supply Voltage Limits
- 195-660 V
- Discrete Input Type
- LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
- Physical Interface
- RS485 multidrop
- Type Of Cooling
- forced convection
- Discrete Input Number
- 3
- Assembly Style
- with heat sink
- Operating Position
- vertical +/- 10 degree
- Ptc Probe Input
- 750 Ohm
- Width
- 206 mm
- Transmission Rate
- 4800, 9600 or 19200 bps
- Depth
- 299 mm
- Discrete Input Logic
- positive logic LI1, LI2, LI3 < 5 V <= 2 mA > 11 V, >= 5 mA
- Protection Type
- phase failure line || thermal protection motor || thermal protection starter
- Supply Frequency
- 50...60 Hz - 10...10 %