Potrzebujesz więcej informacji?

Zadzwoń do nas pod numer:+48 17 778 34 19

Schneider Electric B15.5

Name: Thermal Unit, Type S, Type B, melting alloy, Class 20
Brand: Schneider Electric
SKU: B15.5

Thermal Unit, Type S, Type B, melting alloy, Class 20

1 / 5

Zdjęcie katalogowe producenta

Opis produktu

Status Cyklu Życia:

Thermal units are intended to protect motors, controllers, and branch-circuit conductors against excessive heating due to prolonged motor over-currents up to and including locked rotor currents. Protection of the motor and the other branch circuit components from higher currents, due to short circuits or grounds, is a function of the branch circuit fuses or circuit breakers. Class 20 thermal units respond to overload current conditions according to trip curves. These thermal units will trip in 20 seconds or less on overload conditions. These thermal units have a one piece construction. The motor current passes through a small heater winding within these thermal units. Under overload conditions, the heat causes a special solder to melt allowing a ratchet wheel to spin free thus opening the control circuit contacts and opening the motor contacts. AIC Rating in accordance with UL512 is 200,000 Amp. This fuse holder is UL listed and CSA certified.

Potrzebujesz więcej informacji?

Zadzwoń do nas pod numer:+48 17 778 34 19

Metody płatności:

Szczegóły oferty

Oferta od:: Zaufany dostawca — Stany Zjednoczone, 20–49 pracowników
Dostępność:: 5 szt.
W magazynie
Zaktualizowano: 20-04-2026
Gwarancja:: 24 miesiące
Stan produktu:: Odnowiony

Odnowiony - Produkt odnowiony, sprawdzony, wyczyszczony i naprawiony do pełnej sprawności przez producenta lub certyfikowanego technika. Produkt jest w doskonałym stanie i w pełni sprawny.

Sprzedawca jest odpowiedzialny za wysyłkę produktu i wystawienie faktury

Specyfikacje

Marka: Schneider Electric
Thermal Overload Type: melting alloy
Range Of Product: B
Motor Tripping Class: 20
China Rohs Regulation: Product out of China RoHS scope. Substance declaration for your information.
Pvc Free: Yes
Eu Rohs Directive: Not applicable, out of EU RoHS legal scope

Dostępne oferty

(1)

	Stan produktu	Dostępność	Dostawca	Gwarancja	Działanie
	Stan produktu Odnowiony	Dostępność 5 szt. W magazynie Zaktualizowano: 20-04-2026	Dostawca Stany ZjednoczoneZaufany dostawca — 20–49 pracowników	Gwarancja 24 miesiące

Dokumenty

Karta katalogowa

Karta katalogowa dla Schneider Electric B15.5, w tym specyfikacje i funkcje.

Pobierz arkusz danych

Modele CAD

Model 3D CAD i rysunki techniczne, gotowe do Twojego oprogramowania projektowego.

Pobierz model CAD

Dane produktu zaktualizowano: 20-04-2026

Kompatybilne produkty

2510MBA1Schneider Electric

Manual Starter, integral horsepower, NEMA M0, 600 VAC, 2 pole, 2 HP at 230 VAC, single phase, no indicator, NEMA 12

2510MBA2Schneider Electric

Manual starter, integral horsepower, NEMA M0, 600VAC, 3 pole, 5HP at 380/575VAC, 3 phase, no indicator, NEMA 12

2510MBG1Schneider Electric

Manual starter, integral horsepower, NEMA M0, 600VAC, 2 pole, 2HP at 230VAC, 1 phase, no indicator, NEMA 1

2510MBG2Schneider Electric

Manual starter, integral horsepower, NEMA M0, 600VAC, 3 pole, 5HP at 380/575VAC, 3 phase, no indicator, NEMA 1

2510MBO1Schneider Electric

Manual Starter, integral horsepower, NEMA M0, 600 VAC, 2 pole, 2 HP at 230 VAC, single phase, no indicator, open style

2510MBO2Schneider Electric

Manual starter, integral horsepower, NEMA M0, 600VAC, 3 pole, 5HP at 380/575VAC, 1 phase, no indicator, open

2510MBW1Schneider Electric

Manual starter, integral horsepower, NEMA M0, 600VAC, 2 pole, 2HP at 230VAC, 1 phase, no indicator, NEMA 4/4X

2510MBW11Schneider Electric

Manual starter, integral horsepower, NEMA M0, 600VAC, 2 pole, 2HP at 230VAC, 1 phase, no indicator, NEMA 4/4X

2510MBW12Schneider Electric

Manual starter, integral horsepower, NEMA M0, 600VAC, 3 pole, 5HP at 380/575VAC, 3 phase, no indicator, NEMA 4/4X

2510MBW2Schneider Electric

Manual starter, integral horsepower, NEMA M0, 600VAC, 3 pole, 5HP at 380/575VAC, 3 phase, no indicator, NEMA 4/4X

2510MCA1Schneider Electric

Manual starter, integral horsepower, NEMA M1, 600VAC, 2 pole, 3HP at 230VAC, 1 phase, no indicator, NEMA 12

2510MCA2Schneider Electric

Manual Starter, integral horsepower, NEMA M1P, 600 VAC, 2 pole, 5 HP at 230 VAC, single phase, no indicator, NEMA 12

2510MCA3Schneider Electric

Manual starter, integral horsepower, NEMA M1, 600VAC, 3 pole, 10HP at 380/575VAC, 3 phase, no indicator, NEMA 12

2510MCG1Schneider Electric

Manual starter, integral horsepower, NEMA M1, 600VAC, 2 pole, 3HP at 230VAC, 1 phase, no indicator, NEMA 1

2510MCG2Schneider Electric

This manual starter provides overload protection and On-Off control for AC motors up to 5HP at 230VAC in a single-phase configuration.

2510MCG3Schneider Electric

Manual starter, integral horsepower, NEMA M1, 600VAC, 3 pole, 10HP at 380/575VAC, 3 phase, no indicator, NEMA 1

2510MCO3Schneider Electric

Manual starter, integral horsepower, NEMA M1, 600VAC, 3 pole, 10HP at 380/575VAC, 3 phase, no indicator, open

2510MCW13Schneider Electric

Manual starter, integral horsepower, NEMA M1, 600VAC, 3 pole, 10HP at 380/575VAC, 3 phase, no indicator, NEMA 4/4X

2510MCW2Schneider Electric

Manual starter, integral horsepower, NEMA M1P, 600VAC, 2 pole, 5HP at 230VAC, 1 phase, no indicator, NEMA 4/4X

2510MCW3Schneider Electric

Manual starter, integral horsepower, NEMA M1, 600VAC, 3 pole, 10HP at 380/575VAC, 3 phase, no indicator, NEMA 4/4X

2510TBG2Schneider Electric

Manual Starter, integral horsepower, NEMA M0, 600 VAC, 3 pole, 5 HP at 380/575 VAC, three phase, no indicator, NEMA 1

2510TCO3Schneider Electric

Manual Starter, integral horsepower, NEMA M1, 600 VAC, 3 pole, 10 HP at 380/575 VAC, three phase, no indicator, open

8911DPSG13V02Schneider Electric

Starter, Definite Purpose, nonreversing, 20A, 3 pole, 3 phase, 120VAC coil, melting alloy overload, NEMA 1, +options

8911DPSG13V06Schneider Electric

Starter, Definite Purpose, nonreversing, 20A, 3 pole, 3 phase, 440/480VAC 50/60Hz coil, melting alloy overload, NEMA 1

8911DPSG13V09Schneider Electric

Starter, Definite Purpose, nonreversing, 20A, 3 pole, 3 phase, 208V to 240V AC coil, melting alloy overload, NEMA 1

8911DPSG23V06Schneider Electric

Starter, Definite Purpose, nonreversing, 25A, 2 pole, 1 phase, 480VAC coil, melting alloy overload, NEMA 1, +options

8911DPSG23V09Schneider Electric

Starter, Definite Purpose, nonreversing, 25A, 2 pole, 1 phase, 208V to 240V AC coil, melting alloy overload, NEMA 1

8911DPSG32V09Schneider Electric

Starter, Definite Purpose, nonreversing, 30A, 2 pole, 1 phase, 208V to 240V AC coil, melting alloy overload, NEMA 1

8911DPSG33V09Schneider Electric

Starter, Definite Purpose, nonreversing, 30A, 3 pole, 3 phase, 208V to 240V AC coil, melting alloy overload, NEMA 1, +options

8911DPSG42V09Schneider Electric

Starter, Definite Purpose, nonreversing, 40A, 2 pole, 1 phase, 208V to 240V AC coil, melting alloy overload, NEMA 1

8911DPSG43V06Schneider Electric

Starter, Definite Purpose, nonreversing, 40A, 3 pole, 3 phase, 480VAC coil, melting alloy overload, NEMA 1, +options

8911DPSG43V09Schneider Electric

Starter, Definite Purpose, nonreversing, 40A, 3 pole, 3 phase, 208V to 240V AC coil, melting alloy overload, NEMA 1

8911DPSG53V09Schneider Electric

This nonreversing definite purpose starter is rated for 50A and designed for 3-phase applications with a coil voltage range of 208V to 240V AC.

8911DPSO13V02Schneider Electric

NEMA starter, Definite Purpose, 20A, 7.5HP at 600VAC, 3 phase, 3 pole, melting alloy, 120VAC coil, open

8911DPSO32V09Schneider Electric

NEMA starter, Definite Purpose, 30A, 5HP at 240VAC, 1 phase, 2 pole, melting alloy, 208V to 240VAC coil, open

8911DPSO33V02Schneider Electric

NEMA starter, Definite Purpose, 30A, 20HP at 600VAC, 3 phase, 3 pole, melting alloy, 120VAC coil, open

8911DPSO42V09Schneider Electric

NEMA starter, Definite Purpose, 40A, 7.5HP at 240VAC, 1 phase, 2 pole, melting alloy, 208V to 240VAC coil, open

8911DPSO43V14Schneider Electric

NEMA starter, Definite Purpose, 40A, 25HP at 600VAC, 3 phase, 3 pole, melting alloy overload, 24VAC coil, open

8911DPSO53V02Schneider Electric

NEMA starter, Definite Purpose, 50A, 30HP at 600VAC, 3 phase, 3 pole, melting alloy, 120VAC coil, open

9065SEO8Schneider Electric

Overload Relay, Type S, melting alloy, separate mount overload, NEMA size 2, 3 pole, 3 phase, 45A, 600VAC

Pulpit analityczny AutomaINSIGHTS dla B15.5

Wgląd w rynek: B15.5

Uzyskaj analizy w czasie rzeczywistym i dane rynkowe dotyczące B15.5 i innych produktów z kategorii Wyłączniki automatyczne i bezpieczniki, aby zoptymalizować decyzje zakupowe.

Dane o dostępności zapasów w czasie rzeczywistym od 700 dystrybutorów MRO w Europie i USA
Analiza cen według stanu (nowe, używane, odnowione) z medianą cen rynkowych
Monitorowanie dostępności krytycznych komponentów w celu zapobiegania przestojom produkcji

Powiązane kategorie

Aparatura niskiego napięcia Styczniki i przekaźniki Łączniki i aparatura modułowa