Rittal Enclosure Fan
CMC III door control module DCM
2-piece sheet steel door VX with backup ventilation, WxH=800x2000mm
CMC III Access sensor VX
Operating housing AX with handle strips
CP U handle, for front panel 482,6 mm
Rittal Industrial Enclosure
Side panel, horizontally divided, 2200x1000 mm, RAL 7035
VX IT, vented, 19" mounting angles standard, RAL7035, WHD 800x2000x1000mm,...
Cross member cutter
Sheet metal punch for stainless steal Ø 60 mm
Metfallfilter für SK 3184.800/3184.840
SK Condenser, 35 kW, LCP DX/FC
Wall-mounted cooling unit Blue e+ chemistry design, 1.6 kW
Temperature sensor
SK roof-mounted fan, roof vent, WHD: 400 x 133 x...
Ground Straps
Enclosure Heater
Screw
Rittal Compact Enclosure for Industrial Automation
Blanking cover
Roof plate IP 55, solid for VX, VX IT, 800x1000...
SV Threaded bolt, M12, L: 80 mm
SV Component adaptor, 1600 A, 690 V, 3-pole, 185 mm,...
GA Mounting plate, WH: 245x142 mm
VX Baying enclosure system, WHD: 600x1800x400 mm, single door
VX Lock insert, type G, 6.5 mm triangular (CNOMO)
Rittal Industrial Enclosure Solution
DK Cable management panel, 1 U, with steel rings
VX Support rail 48 x 26 mm, W: 1200 mm
VX IT Dynamic 19" mounting angles, front, 47 U
PDU managed 32A/1P CEE 16xC13+2xC19
PDU basic 16A/1P CEE 8xCEE7/3 earthing-pin, CEE 7/3: 8 x...
Screwdriver insulated PH
TX CableNet, vented, 42 U, WHD: 800x2200x1000 mm, RAL 7035,...
Wire end ferrule
DK Multi-tooth screws, M5 x 16 mm, T25
E-Cu Busbars
Support section CP 120
Liquid Cooling Package, Air/water heat exchanger, 9.5 kW, 300 x...
VX SE free-standing enclosure system
Rittal Industrial Enclosure - NEMA 12 Rated
Side panel, vertically divided, 2000x800 mm, RAL 7035
Base/plinth corner pieces with base/plinth trim panels, front and rear,...
Rittal Cabinet Cooling Solution
Hydraulic hose
Crimping tool
Cable gland, polyamide
Rittal Control Panel Enclosure
SG Mounting component for wall/base mounting, for signal pillar, modular
Busbar Supports
SK Vario rack-mounted fan, for 482.6 mm (19"), 480 m³/h
Partial Mounting Plate
CS Semi-cylinder for lock inserts, regarding to DIN 18 252
VX Roof plate, WD: 850x600 mm, for cable entry glands
PK Polycarbonate Housings
Angle bracket
SV Busbar cover section, for demension WH: 12/15x10 mm, L:...
VX Front trim panel, top, IP 54, WH: 800x300 mm
OM adapter
Partial door
VX Comfort handle, for lock inserts
Contact hazard protection cover for component adaptor SV 967770X/71X
SV Threaded bolt, M10, L: 35 mm
PDU basic 16A/3P CEE 18xC13+12xC19, 44x1295x70 mm, IEC 60320: 18...
Component support without contact system, W x H: 18 x...
CMC III programming cable
Mini-PLS Component Adaptor
VX IT, solid,IP55,19"mounting angles, standard,RAL7035,WHD 800x2000x800mm, 42U
Base tray
Side panel, vertically divided, 2000x1000 mm, RAL 7035
Screw adapter
VX Lock components
Controller
Precision Cooling Unit for Industrial Automation
Air/Water Heat Exchangers
Rittal Industrial Enclosure with Climate Control
SZ EMC cable glands, metric, size: M16
Attachment CP 60
SZ Spacer, for TS roof plate, H: 10 mm
Compartment Divider
TopTherm Blue e Wall-Mounted Cooling Unit, NEMA 4X
TS Cable duct for mounting plate, WHD: 40x2000x80 mm
TopTherm Filter Fan Units
TS Comfort handle, for TS, TS IT, SE, PC, IW
VX Gland plate, WD: 600x75 mm
SZ Stepped collar, for wall thickness from 1,5 bis 4,5...
PDU for busbar entry,Power consumption7,4 kW,Rated current (max.): 32 A,...
TP Universal Consoles
PDU basic 32A/1P CEE 16xCEE7/3 earthing-pin, CEE 7/3: 16 x...
SZ Adaptor for connector cut-outs, for reduction from 24 to...
Rittal Climate Control Unit - Efficient Industrial Cooling
Mounting plate
Consoles for 3-Part Assembly