101209119

AZM 161 BZ ST1-AS R

101209119

101209119

101209119

101209119

Get up to 90 days payment terms from 500+ suppliers
Reselling discounts up to 40%!

Send request for price

1

Payment methods:

Product Conditions:

New Sealed

Availability:: 0 pcs.
On Request
Supplier Warranty:: 12 months

Send request for price

Updated at 23.05.2024

Electrical data

Switching frequency: 1,000 /h

Electrical data - AS-Interface specification

AS-i Specification: Safety-Slave
AS-i Version: V 2.1
AS-i Profile: S-7.B.F.E
AS-i, IO-Code: 0x7
AS-i, ID-Code: 0xB
AS-i, ID-Code1: 0xF
AS-i, ID-Code2: 0xE
AS-i Input, Channel 1: Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2: Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Outputs, DO 0: Solenoid control
AS-i Outputs, DO 1: No Function
AS-i Outputs, DO 2: No Function
AS-i Outputs, DO 3: No Function
AS-i Parameter bits, P0: Actuator detected
AS-i Parameter bits, P1: Solenoid interlock locked
AS-i Parameter bits, P2: Magnet voltage in tolerance range
AS-i Parameter bits, P3: Error message - locking/unlocking of the solenoid interlock blocked
Note (AS-i Parameter bits): Set the parameter outputs to "1111" (0xF) | FID: periphery error
AS-i Input module address: 0
Note (AS-i Input module address): Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

Note

Note (General): Interlocks with the power to lock principle may only be used in special cases after a thorough evaluation of the accident risk, since the guarding device can immediately be opened on failure of the electrical power supply or when the main switch is opened.
Note (Manual release): For maintenance, installation, etc. | For manual release using M5 triangular key, available as accessory

Mechanical data - Dimensions

Length of sensor: 30 mm
Width of sensor: 130 mm
Height of sensor: 90 mm

Pin assignment

PIN 1: AS-i +
PIN 2: Aux - (P)
PIN 3: AS-Interface -
PIN 4: Aux + (P)

Ambient conditions - Insulation values

Rated insulation voltage U: 32 VDC
Rated impulse withstand voltage U: 0.8 kV
Overvoltage category: III
Degree of pollution: 3

Scope of delivery

Scope of delivery: Actuator must be ordered separately.

General data - Features

Power to unlock: Yes
Actuator and interlock combined monitored: Yes
Manual release: Yes
Integral system diagnostics, status: Yes
Number of actuating directions: 3

General data

Standards: EN IEC 62026-2 | EN ISO 13849-1 | EN IEC 60947-5-1 | EN IEC 61508
Coding level according to EN ISO 14119: Low
Working principle: electromechanical
Enclosure material: Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Gross weight: 465 g
Reaction time, maximum: 100 ms

Safety classification

Standards: EN ISO 13849-1 | EN IEC 61508
Performance Level, up to: c
Category: 1
PFH value: 1.14 x 10⁻⁶ /h
Note (PFH-value): up to max. 100,000 switching cycles/year
Safety Integrity Level (SIL), suitable for applications in: 1
Mission time: 20 Year(s)
Please note:: Einsetzbar wenn ein Fehlerausschluss für eine gefahrbringende Beschädigung der 1-kanaligen Mechanik zulässig ist und ein ausreichender Manipulationsschutz gewährleistet ist.
Performance Level, up to: d
Category: 3
PFH value: 1.01 x 10⁻⁷ /h
Safety Integrity Level (SIL), suitable for applications in: 2

Electrical data - AS Interface

Rated operating voltage: 26.5 ... 31.6 VDC (Protection against polarity reversal)
AS-i Current consumption, maximum: 250 mA

Other data

Note (applications): sliding safety guard | removable guard | hinged safety guard

Ambient conditions

Degree of protection: IP67
Ambient temperature: -25 ... +60 °C
Storage and transport temperature, minimum: -25 °C
Storage and transport temperature, maximum: +85 °C
Relative humidity, minimum: 30 %
Relative humidity, maximum: 95 %
Note (Relative humidity): non-condensing | non-icing
Resistance to vibrations: 10 Hz ... 150 Hz, amplitude 0.35 mm
Restistance to shock: 30 g / 11 ms
Protection class: II
Permissible installation altitude above sea level, maximum: 2,000 m

Mechanical data - Connection technique

Termination: Connector plug M12, 4-pole, (A-coding)
Connector position: Bottom

Mechanical data

Mechanical life, minimum: 1,000,000 Operations
Actuating play in direction of actuation: 5.5 mm
Holding force F: 2,000 N
Holding force F: 2,600 N
Latching force: 30 N
Actuating speed, maximum: 2 m/s
Mounting: Screws
Type of the fixing screws: 3x M6

Approvals - Standards

Certificates: TÜV | cULus | ASi-SaW

Status indication

Note (LED switching conditions display): (1) LED yellow: Channel 2 / AS-i SaW Bit 2.3 | (2) LED green/red (AS-i duo LED): Supply voltage / communication error / slave address = 0 / periphery error detected | (3) LED yellow: Channel 1 / AS-i SaW Bit 0.1