Schneider Electric
BRS368H130AAB
3-phase stepper motor - 1.70 Nm - shaft Ø8 mm - L=79 mm - without brake - wire
- Get up to 90 days payment terms from 500+ suppliers
- Reselling discounts up to 40%!
€212.63
1
Payment methods:
A total of 3 Parts In-Stock from 12 Distributors
Product Conditions:
Offer with manufacturer lead time
Ships in:On Request
Best price:
€138.28
Additional Information
- Part Number
- BRS368H130AAB
- UNSPSC
- 26101205
- Tariff Code
- 8501528040
- Country of Origin
- DE
Environment
- Ambient Air Temperature For Operation
- -25-40 °C
- Standards
- IEC 60072-1 || IEC 50347
- Temperature Class
- F winding IEC 60034-1
- Vibration Resistance
- 20 m/s² maximum || A IEC 60034-14
- Ambient Air Temperature For Storage
- -25-70 °C
- Type Of Cooling
- natural convection
- Relative Humidity
- 15-85 % without condensation
- Ip Degree Of Protection
- total except shaft bushing IP56 IEC 60034-5 || shaft bushing without shaft seal ring IP41 IEC 60034-5
- Operating Altitude
- <= 3280.84 ft (1000 m) without power derating
Contractual warranty
- Warranty
- 18 months
Offer Sustainability
- Rohs Exemption Information
- Yes
- Mercury Free
- Yes
- Environmental Disclosure
- ENVPEP111101EN
- Sustainable Offer Status
- Green Premium product
- Pvc Free
- Yes
- Reach Regulation
- Reference contains Substances of Very High Concern above the threshold
- California Proposition 65
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Weee
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- China Rohs Regulation
- X
- Circularity Profile
- N/A
- Eu Rohs Directive
- Pro-active compliance (Product out of EU RoHS legal scope)
Complementary
- Circle Diameter Of The Mounting Holes
- 66.6 mm
- Maximum Radial Force Fr
- 50 N first shaft end) || 40 N second shaft end)
- Nominal Torque
- 1.5 N.m
- Rotor Inertia
- 0.38 kg.cm²
- Centring Collar Depth
- 1.6 mm
- Holding Brake
- without
- Second Shaft
- with second shaft end
- Shaft Length
- 21 mm
- Net Weight
- 2 kg
- Resolution
- 1.8 °, 0.9 °, 0.72 °, 0.36 °, 0.18 °, 0.09 °, 0.072 °, 0.036 ° step angle || 200, 400, 500, 1000, 2000, 4000, 5000, 10000 steps number of full steps per revolution
- Angular Acceleration
- 200000 rad/s²
- Maximum Starting Frequency
- 6 kHz
- Time Constant
- 4.6 ms
- Number Of Mounting Holes
- 4
- Holding Torque
- 1.7 N.m
- Shaft Diameter
- 8 mm
- Mounting Holes Diameter
- 5.2 mm
- Service Life In Hours
- 20000 h bearing)
- Resistance
- 0.7 Ohm winding)
- Shaft End
- smooth shaft
- Electrical Connection
- flying leads
- Line Rated Current
- 5.8 A
- Accuracy Error
- +/- 6 arc min
- Maximum Axial Force Fa
- 100 N tensile force) || 8.4 N force pressure)
Specifications
- Maximum Mechanical Speed
- 3000 rpm
- Mounting Support
- flange
- Number Of Motor Poles
- 6
- Product Or Component Type
- motion control motor
- Length
- 79 mm
- Centring Collar Diameter
- 38 mm
- Motor Flange Size
- 57.2 mm
- Motor Type
- 3-phase stepper motor
- Supply Voltage Limits
- 34-34 V DC || 48-48 V DC
- Range Compatibility
- Lexium SD3
- Device Short Name
- BRS3