RENF22R2MMW

Offer Sustainability

Rohs Exemption Information

Yes

Mercury Free

Yes

Environmental Disclosure

ENVPEP1401008EN

Sustainable Offer Status

Green Premium product

Reach Regulation

Reference contains Substances of Very High Concern above the threshold

California Proposition 65

WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

China Rohs Regulation

X

Circularity Profile

ENVEOLI1401008EN

Eu Rohs Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Complementary

Power Consumption In W

1.5 W 240 V DC || 0.6 W 24 V DC

Contacts Type And Composition

2 C/O timed contact, cadmium free || 1 C/O timed and instantaneous contact, cadmium free

Discrete Output Type

relay

Setting Accuracy Of Time Delay

+/- 1 % 1...999 h 25 °C || +/- 2 % 1...3600 s 25 °C || +/- 20 ms 100 ms...10 s 25 °C || +/- 30 ms 50...100 ms 25 °C

Creepage Distance

4 kV/3 IEC 60664-1

Maximum Delay Response

100 ms

Insulation Resistance

100 MOhm 500 V DC IEC 60664-1

Nominal Power

0.0002 mW

Power Consumption In Va

3-3 VA 240 V AC

Switching Capacity In Va

2000 VA

Minimum Pulse Duration

100 ms with load in parallel || 60 ms no-load

Maximum Switching Current

8 A

Function Available

A- Power on-delay relay-2 C/O || Ac- On-delay and off-delay relay w/ control signal-2 C/O || Ad- Pulse delayed relay w/ control signal-2 C/O || Ah- Pulse delayed relay (single cycle) w/ control signal-2 C/O || Ak- Asymmetrical on-delay and off -delay relay w/ control signal-2 C/O || At- Power on-delay relay w/ pause/summation (Y1)-2 C/O || B- Single interval relay w/ control signal-2 C/O || Bw- Double interval relay w/ control signal-2 C/O || C- Off-delay relay w/ control signal-2 C/O || D- Symmetrical flashing relay (starting pulse-off)-2 C/O || Di- Symmetrical flashing relay (starting pulse-on)-2 C/O || Dt- Symmetrical flashing relay (starting pulse-off) w/ pause/summation (Y1)-2 C/O || Dit- Symmetrical flashing relay (starting pulse-on) w/ pause/summation (Y1)-2 C/O || H- Interval relay-2 C/O || Ht- Interval relay w/ pause/summation (Y1)-2 C/O || Li- Asymmetrical flashing relay (starting pulse-on)-2 C/O || Lt- Asymmetrical fl ashing relay (starting pulse-off) w/ pause/summation (Y1)-2 C/O || Lit- Asymmetrical flashing relay (starting pulse-on) w/ pause/summation (Y1)-2 C/O || N- Safe-guard relay-2 C/O || O- Delayed Safe-guard relay-2 C/O || P- Pulse delayed relay w/ fixed pulse length-2 C/O || Pt- Pulse delayed relay w/ fixed pulse length and pause/summation-2 C/O || Qt- Star-delta relay (2 CO outputs w/ split common)-2 C/O || Qtt- Star-delta relay (2 CO outputs w/ split common) w/ pause/summation (Y1)-2 C/O || TI- Bistable relay w/ control signal on-2 C/O || Tt- Retriggerable bistable relay w/ control signal on-2 C/O || W- Interval relay w/ control signal off-2 C/O || L- Asymmetrical flashing relay (starting pulse-off)-2 C/O

Operating Distance

10 mm

Voltage Range

0.85...1.1 Un

Local Signalling

Un, green LED steady)power ON || R1, amber LED steady)relay energised || R2, amber LED steady)relay energised || pairing, green LED steady)communication status || Un, green LED fast blinking)diagnosis mode || R1, amber LED blinking)timing in progress || R2, amber LED blinking)timing in progress

Net Weight

0.0904 kg

[Uimp] Rated Impulse Withstand Voltage

5 kV 1.2/50 µs IEC 60664-1

Voltage Drift

+/- 0.2 %/V

Reset Time

120 ms on de-energisation

Maximum Switching Voltage

250 V

Connections - Terminals

screw terminals, 1 x 0.5...1 x 3.3 mm² AWG 20...AWG 12) solid without cable end || screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end || screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 14) flexible with cable end || screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) flexible with cable end

[Us] Rated Supply Voltage

24...240 V AC/DC

Temperature Drift

+/- 0.05 %/°C

Time Delay Range

0.05 s...999 h

Minimum Switching Current

10 mA 5 V

Overvoltage Category

III IEC 60664-1

Input Voltage

<= 2.4 V

Mounting Support

35 mm DIN rail conforming to IEC 60715

Nominal Output Current

8 A

Electrical Durability

100000 cycles for resistive load, 8 A at 250 V, AC

Mechanical Durability

10000000 cycles

Housing Material

self-extinguishing

Safety Reliability Data

MTTFd = 227.5 years 100 % duty cycle continuous operating condition at 30 °C

Mounting Position

any position

Width

22.5 mm

Time Delay Type

power on-delay || on-delay and off-delay || pulse delay || asymmetrical on-delay and off-delay || interval || off-delay || symmetrical flashing || safe-guard || star-delta || asymmetrical flashing || bistable

Product Compatibility

NFC enabled mobile device

Tightening Torque

0.6-1 N.m IEC 60947-1 || 5.3-8.8 lbf.in IEC 60947-1

Maximum Operating Frequency

13.56 MHz

Supply Frequency

50...60 Hz +/- 5 %

Repeat Accuracy

+/- 0.2 % 10 s...999 h || +/- 0.5 % 100 ms...10 s || +/- 0.7 % 50...100 ms

Environment

Product Certifications

CE || CSA || KC || UL || CCC || EAC || DNV-GL

Ambient Air Temperature For Operation

-20-60 °C

Standards

IEC 61000-6-1 || IEC 61000-6-2 || IEC 61000-6-4 || EN 61812-1 || IEC 61000-6-3

Immunity To Microbreaks

10 ms

Electromagnetic Compatibility

electrostatic discharge immunity test - test level: 6 kV level 3 (contact discharge) conforming to IEC 61000-4-2 || electrostatic discharge immunity test - test level: 8 kV level 3 (air discharge) conforming to IEC 61000-4-2 || fast transients immunity test - test level: 1 kV level 3 (capacitive connecting clip) conforming to IEC 61000-4-4 || fast transients immunity test - test level: 2 kV level 3 (direct contact) conforming to IEC 61000-4-4 || surge immunity test - test level: 1 kV level 3 (differential mode) conforming to IEC 61000-4-5 || surge immunity test - test level: 2 kV level 3 (common mode) conforming to IEC 61000-4-5 || radiated radio-frequency electromagnetic field immunity test - test level: 10 V level 3 (0.15...80 MHz) conforming to IEC 61000-4-6 || electromagnetic field immunity test - test level: 10 V/m level 3 (80 MHz...1 GHz) conforming to IEC 61000-4-3 || immunity to microbreaks and voltage drops - test level: 30 % (500 ms) conforming to IEC 61000-4-11 || immunity to microbreaks and voltage drops - test level: 100 % (20 ms) conforming to IEC 61000-4-11 || radiated emission class B conforming to EN 55022 || conducted emission class A conforming to EN 55022 || electromagnetic field immunity test - test level: 3 V/m level 2 (1.4 GHz...2 GHz) conforming to IEC 61000-4-3 || electromagnetic field immunity test - test level: 1 V/m level 1 (2...2.7 GHz) conforming to IEC 61000-4-3

Dielectric Strength

2.5 kV 1 mA/1 minute 50 Hz between relay output and power supply with basic insulation || basic insulation

Shock Resistance

15 gn not operating 11 ms IEC 60068-2-27 || 5 gn in operation 11 ms IEC 60068-2-27

Vibration Resistance

20 m/s² 10-150 Hz)IEC 60068-2-6

Pollution Degree

3 IEC 60664-1

Directives

2014/35/EU - low voltage directive || 2014/53/EU - radio equipment directive || 2014/30/EU - electromagnetic compatibility

Ambient Air Temperature For Storage

-40-70 °C

Relative Humidity

95-95 % 25-55 °C

Ip Degree Of Protection

housing IP40 IEC 60529 || front face IP40 IEC 60529 || terminals IP20 IEC 60529

Specifications

Range Of Product

Harmony Timer Relays

Software Designation

Zelio NFC downloadable from Google Play store)

Product Or Component Type

multifunction relay

Operating System

Android

Software Version

V4.4 and above

Device Short Name

RENF22

Documents

CAD Models

Trace parts

Download