Square D ATV312H075M2
Never miss out on the parts you need!
Register now to receive instant notifications soon as they become available.
Register NowBenefits of creating an account.
- Register for instant notifications on part availability
- Get real-time alerts on inventory changes
- Notifications about hte total available quantity and conditions for each product.
Additional information
| Part Number | ATV312H075M2 |
|---|---|
| UPC | 785901593737 |
Main
| Commercial Status | Commercialised |
|---|---|
| Range of product | Altivar 312 |
| Product or component type | Variable speed drive |
| Product destination | Asynchronous motors |
| Product specific application | Simple machine |
| Assembly style | With heat sink |
| Component name | ATV312 |
| Motor power kW | 0.75 kW |
| Motor power hp | 1 hp |
| [Us] rated supply voltage | 200...240 V (- 15...10 %) |
| Supply frequency | 50...60 Hz (- 5...5 %) |
| Phase | Single phase |
| Line current | 7.5 Afor 240 V |
| Line current | 8.9 Afor 200 V, 1 kA |
| EMC filter | Integrated |
| Apparent power | 1.8 kVA |
| Maximum transient current | 7.2 Afor 60 s |
| Power dissipation in W | 60 W at nominal load |
| Speed range | 1...50 |
| Asynchronous motor control profile | Factory set : constant torque |
| Asynchronous motor control profile | Sensorless flux vector control with PWM type motor control signal |
| Electrical connection | L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 0 in² (2.5 mm²) AWG 14 |
| Electrical connection | Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 0 in² (2.5 mm²) AWG 14 |
| Supply | Internal supply for reference potentiometer (2.2 to 10 kOhm)at 10...10.8 V, Internal supply for logic inputsat 19...30 V, |
| Communication port protocol | CANopen |
| Communication port protocol | Modbus |
| IP degree of protection | IP41 on upper part |
| IP degree of protection | IP31 on upper part |
| IP degree of protection | IP21 on connection terminals |
| IP degree of protection | IP20 on upper part without cover plate |
| Option card | Profibus DP communication card |
| Option card | Modbus TCP communication card |
| Option card | Fipio communication card |
| Option card | DeviceNet communication card |
| Option card | CANopen daisy chain communication card |
Complementary
| Supply voltage limits | 170...264 V |
|---|---|
| Network frequency limits | 47.5...63 Hz |
| Prospective line Isc | 1 kA |
| Continuous output current | 4.8 Aat 4 kHz |
| Speed drive output frequency | 0...500 Hz |
| Nominal switching frequency | 4 kHz |
| Switching frequency | 2...16 kHz adjustable |
| Transient overtorque | 170...200 % of nominal motor torque |
| Braking torque | 100 % without braking resistor |
| Braking torque | 100 % with braking resistor continuously |
| Braking torque | 150 % with braking resistorfor 60 s |
| Regulation loop | Frequency PI regulator |
| Motor slip compensation | Adjustable |
| Motor slip compensation | Automatic whatever the load |
| Motor slip compensation | Suppressable |
| Tightening torque | 7.08 lbf.in (0.8 N.m) L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- |
| Tightening torque | 5.31 lbf.in (0.6 N.m) Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 |
| Insulation | Electrical between power and control |
| Analogue input number | 3 |
| Analogue input type | AI3 configurable current 0...20 mA, impedance 250 Ohm |
| Analogue input type | AI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance 30000 Ohm |
| Analogue input type | AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance 30000 Ohm |
| Sampling duration | LI1...LI6 4 ms discrete |
| Sampling duration | AI1, AI2, AI3 8 ms analog |
| Response time | R1A, R1B, R1C, R2A, R2B 8 ms discrete |
| Response time | AOV, AOC 8 ms analog |
| Linearity error | +/- 0.2 % output |
| Analogue output number | 1 |
| Analogue output type | AOV configurable voltage 0...10 V, impedance 470 Ohm, resolution 8 bits |
| Analogue output type | AOC configurable current 0...20 mA, impedance 800 Ohm, resolution 8 bits |
| Discrete input logic | (LI1...LI6) positive logic (source), 11 V (state 1) |
| Discrete input logic | (LI1...LI6) negative logic (source), > 19 V (state 0) |
| Discrete input logic | (LI1...LI4) logic input not wired, |
| Discrete output number | 2 |
| Discrete output type | (R2A, R2B) configurable relay logic NC, electrical durability 100000 cycles |
| Discrete output type | (R1A, R1B, R1C) configurable relay logic 1 NO + 1 NC, electrical durability 100000 cycles |
| Minimum switching current | R1-R2 10 mAat 5 V DC |
| Maximum switching current | R1-R2 on resistive load, 5 Aat 30 V DC, cos phi = 1, L/R = 0 ms |
| Maximum switching current | R1-R2 on resistive load, 5 Aat 250 V AC, cos phi = 1, L/R = 0 ms |
| Maximum switching current | R1-R2 on inductive load, 2 Aat 30 V DC, cos phi = 0.4, L/R = 7 ms |
| Maximum switching current | R1-R2 on inductive load, 2 Aat 250 V AC, cos phi = 0.4, L/R = 7 ms |
| Discrete input number | 6 |
| Discrete input type | (LI1...LI6) programmable, 24 V 0...100 mA with PLC, impedance 3500 Ohm |
| Acceleration and deceleration ramps | Linear adjustable separately from 0.1 to 999.9 s |
| Acceleration and deceleration ramps | S, U or customized |
| Braking to standstill | By DC injection |
| Protection type | Thermal protection motor |
| Protection type | Short-circuit between motor phases drive |
| Protection type | Overheating protection drive |
| Protection type | Overcurrent between output phases and earth (on power up only) drive |
| Protection type | Motor phase breaks drive |
| Protection type | Line supply phase loss safety function, for three phases supply drive |
| Protection type | Line supply overvoltage and undervoltage safety circuits drive |
| Protection type | Input phase breaks drive |
| Insulation resistance | >= 500 mOhmat 500 V DC for 1 minute |
| Local signalling | Four 7-segment display units CANopen bus status |
| Local signalling | 1 LED red drive voltage |
| Time constant | 5 ms for reference change |
| Frequency resolution | Display unit 0.1 Hz |
| Frequency resolution | Analog input 0.1...100 Hz |
| Type of connector | 1 RJ45 Modbus/CANopen |
| Physical interface | RS485 multidrop serial link |
| Transmission frame | RTU |
| Transmission rate | 4800, 9600 or 19200 bps Modbus |
| Transmission rate | 10, 20, 50, 125, 250, 500 kbps or 1 Mbps CANopen |
| Number of addresses | 1...247 Modbus |
| Number of addresses | 1...127 CANopen |
| Number of drive | 31 Modbus |
| Number of drive | 127 CANopen |
| Marking | CE |
| Operating position | Vertical +/- 10 degree |
| Height | 5.71 in (145 mm) |
| Width | 2.83 in (72 mm) |
| Depth | 5.59 in (142 mm) |
| Product weight | 3.31 lb(US) (1.5 kg) |
Environment
| Dielectric strength | 2880 V AC between control and power terminals |
|---|---|
| Dielectric strength | 2040 V DC between earth and power terminals |
| Electromagnetic compatibility | Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 level 3 |
| Electromagnetic compatibility | Electrostatic discharge immunity test conforming to IEC 61000-4-2 level 3 |
| Electromagnetic compatibility | Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 level 4 |
| Electromagnetic compatibility | 1.2/50 µs - 8/20 µs surge immunity test conforming to IEC 61000-4-5 level 3 |
| Standards | IEC 61800-3 |
| Standards | IEC 61800-5-1 |
| Product certifications | CSA |
| Product certifications | C-Tick |
| Product certifications | DNV |
| Product certifications | GOST |
| Product certifications | NOM |
| Product certifications | UL |
| Pollution degree | 2 |
| Protective treatment | TC |
| Vibration resistance | 1.5 mm (f = 3...13 Hz) conforming to EN/IEC 60068-2-6 |
| Vibration resistance | 1 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6 |
| Shock resistance | 15 gn 11 ms conforming to EN/IEC 60068-2-27 |
| Relative humidity | 5...95 % without dripping water conforming to IEC 60068-2-3 |
| Relative humidity | 5...95 % without condensation conforming to IEC 60068-2-3 |
| Ambient air temperature for storage | -13...158 °F (-25...70 °C) |
| Ambient air temperature for operation | 14...140 °F (-10...60 °C) with derating factor without protective cover on top of the drive |
| Ambient air temperature for operation | 14...122 °F (-10...50 °C) without derating with protective cover on top of the drive |
| Operating altitude | 3280.84...6561.68 ft (1000...2000 m) with current derating 1 % per 100 m |
Ordering and Shipping Details
| Category | 22152 - ATV312 / ATV32 (.25 THRU 7.5 HP) |
|---|---|
| Discount Schedule | CP4B |
| GTIN | 00785901593737 |
| Nbr. of units in pkg. | 1 |
| Product availability | Stock - Normally stocked in distribution facility |
| Returnability | Y |
| Country of origin | ID |
Offer Sustainability
| Sustainable offer status | Green Premium product |
|---|---|
| RoHS (date code: YYWW) | Compliant - since 0913 - |
| RoHS (date code: YYWW) | Schneider Electric declaration of conformity |
| REACh | Reference contains SVHC above the threshold - |
| REACh | Go to CaP for more details |
| Product environmental profile | Available |
| Product environmental profile | Download Product Environmental Profile |
| Product end of life instructions | Available |
| Product end of life instructions | Download End of life manual |
Contractual Warranty
| Warranty period | 18 months |
|---|
