Industriekabel & Leitungen

The M8 Connector Line SAIL-M8GM8G-3-0.2V is specifically designed for sensor and actuator applications, featuring a 3-pole configuration. With a length of 0.2 meters, this connector utilizes M8…

This power cable is equipped with a female socket and adheres to the M12 connection standard. It is constructed with a PUR housing material and is compliant with IEC 61076-2-111 standards. The cable…

This M12 connector cable is designed for sensor and actuator applications, featuring a length of 10 meters and a configuration of 8 poles. The connection type is a straight socket with a pin layout…

The M8 / M8 connecting line is designed for robust industrial applications, featuring a total of 4 poles and a length of 0.3 meters. The line is equipped with a straight socket and straight pin…

The 7TCG054800R0033 is a flame-retardant woven cable sleeve designed for effective cable management in demanding environments. Constructed from black polyester, this sleeve can withstand temperatures…

This non-flame retardant braided sleeve is designed for temperature applications up to 150°C (302°F). The material is constructed from gray polyester, providing a durable protective solution. With a…

The Cat 5e UTP RJ45 Punchdown Keystone Jack Module is engineered for terminating 4-pair twisted pair cables in the 22-26 AWG range. Designed to meet the industry standard performance requirements…

The UTP RJ45 Coupler Module Cat 6A, colored orange, is constructed to fulfill rigorous performance requirements, as established by ANSI/TIA-568.2-D and ISO 11801 standards. This component features…

The RJ45 Cat 6 Keystone Jack Module is intended for use with 4-pair, 22–26 AWG twisted pair cable, ensuring reliable connectivity in networking applications. This module is factory tested to surpass…

This Category 6A patch cord is designed for high-speed data transmission, supporting 10GBASE-T Ethernet applications. The cord features a TX6A™ 10Gig™ Keyed Modular Plug on one end and a TX6A™ 10Gig™…

This indoor trunk cable assembly, designated as FXTYP7EL2SAF150, is designed for multimode applications with compliance to TIA-568-C standards for 40G/100G parallel optics. It consists of 12 fibers…

The OM4 12-fiber interconnect cable assembly, designated as FZTRL7N7NBNM025, comprises two PanMPO female connectors and is specifically designed for indoor applications. With a length of 25 meters…

The OM4 12-fiber round harness cable assembly features a PanMPO Male connector on one end and an LC Uniboot connector on the other, specifically engineered to connect MPO-based infrastructure with…

The OM5 24 Fiber Trunk Cable Assembly is designed for high-density applications, featuring a 77-meter length and PanMPO female connectors on both ends. This assembly incorporates a low smoke zero…

The Switch Patching Harness is constructed with Category 6 (Class E), 28AWG U/UTP copper cable, designed to support high-speed data transmission. Measuring 5 meters in length, this harness features a…

This patch harness is designed for effective networking solutions, utilizing Category 6 UTP copper cable with a length of 5 meters (16.4 feet). It features an 8-Pack black plug pack on one end and…

This 19" socket strip is designed for robust electrical connections with a nominal current of 4 A and accommodates 32 positions . Its pitch measures 5.08 mm, ensuring efficient spacing for…

The KDSU (Klippon double seal universal Ex cable gland) is engineered for M32 applications, facilitating the entry of cables with an outer diameter between 23.2 mm and 30.5 mm . This model supports…

The FO Slotted Loop Tie is constructed from orange polyamide (Nylon 6.6) on the hook side and low-density polyethylene on the loop side, making it suitable for applications requiring temperature…

This Liquid Tight Flexible Metallic Conduit features a galvanized steel core and a protective PVC jacket, enabling its use in environments requiring flexibility due to motion, vibration, and bending…