Kabel & Konnektivität

The FMC 1,5/11-ST-3,81 is a printed-circuit board connector characterized by its green color and a nominal cross section of 1.5 mm². It allows for a maximum nominal current of 8 A and is rated for a…

The PAI 1,5/4-F test adapter is engineered for safe testing with a touch-proof design that complies with DIN EN 50274, ensuring protection against accidental contact when connected. It is compatible…

The PP-H 6/1-M OG plug is designed for self-assembly, featuring a nominal voltage rating of 1000 V and a maximum current capacity of 41 A. It employs a push-in connection method, allowing for…

The PTFIX 12X2,5-NS15A GY distribution block is designed for efficient electrical connections, allowing bridging between multiple units via the conductor shaft. It supports a nominal voltage of 690 V…

The connector hood, identified by the designation code SACB-C-H180-8/ 8-10,0PUR SCO , is engineered for use in sensor and actuator box configurations. This unit features a metal M12-SPEEDCON-socket…

The 4-position socket connector, designated as SACC-M12FS-4CON-PG7-M, is designed for reliable connectivity in various applications. It features a straight M12 A-coded configuration and utilizes a…

The Device connector front mounting with model number SM-7EPWN8AA200 is engineered for applications requiring high load capacity. This angled connector is equipped with SPEEDCON locking and features…

The UP 4/9 plug is designed for high-performance electrical connections with a nominal voltage of 800 V and a maximum load current of 32 A, accommodating a rated cross-section of 4 mm². This…

The D-SUB contact carrier is specifically designed for 25 signal contacts and features a shell size of 3. It accommodates crimp contacts arranged in a straight configuration, allowing for secure…

The PCB plug-in connector is designed with a male header configuration, featuring a total of 12 poles oriented at a 180° angle. It employs a THT solder connection method, with a solder pin length of…

The PLC-BPT- 24UC/21HC is a 14 mm basic terminal block optimized for high continuous currents. It employs a Push-in connection method and is designed for installation on DIN rail NS 35/7.5. This…

The PTFIX 12X1,5-G GN distribution block is designed for efficient connectivity with a push-in connection method. It operates at a nominal voltage of 450 V and can handle a maximum nominal current of…

This plug, designated as SPV 2,5/ 9 , is designed for applications requiring a nominal voltage of 500 V and a nominal current of 24 A. It features a total of 9 positions and employs a reliable…

This plug is designed to operate at a nominal voltage of 800 V and a maximum load current of 32 A, accommodating conductor cross sections from 0.2 mm² to 6 mm². The connection method is a screw…

Feed-through terminal block, The max. load current must not be exceeded by the total current of all connected conductors.Current and voltage are determined by the plug used., nom. voltage: 500 V…

This aluminium die-cast hood , sized for 16A applications, boasts a low construction design and is equipped with a single locking lever for easy access. The hood's entry point is located on the side…

PCB headers, nominal cross section: 1.5 mm², color: green, nominal current: 8 A, rated voltage (III/2): 160 V, contact surface: Tin, type of contact: Male connector, number of potentials: 10, number…

This Nylon Insulated Ring Terminal accommodates wire sizes ranging from #12 to #10 AWG and is designed with a bolt hole measuring 3/8 inch. The terminal is constructed from copper with a tin plating…

PCB connector, nominal cross section: 0.5 mm², color: green, nominal current: 4 A, rated voltage (III/2): 160 V, contact surface: Tin, type of contact: Female connector, number of potentials: 2…

The H-A 3 BS connector is designed with a screw connection and includes 3+PE contacts, suitable for a variety of applications. It operates effectively within a voltage rating of 600 V and is capable…