Kabel & Leitungen

This M12 connector cable features a 4-pole configuration and a length of 3 meters , designed for reliable connections in various applications. The cable has a pin, straight version without a…

The SAIL-M12BW-8S1.5U features an 8-pole M12 angled socket designed for sensor and actuator applications. This unit is equipped with a 1.5 m cable, made of PUR with a black sheath, ensuring…

This connecting line utilizes an M12 to M12 configuration with a total of 5 poles, designed for a variety of industrial applications. The cable measures 3 meters in length and is equipped with a…

The SAIL-M12GM12W-4-0.5U is a connecting line designed for sensor and actuator applications, featuring M12 connectors on both ends. This cable has a total length of 0.5 meters and includes 4 poles…

The connecting line is equipped with M8 connectors, featuring a configuration of 3 poles and a length of 0.25 m. It is designed for a rated voltage of 60 V and a rated current of 4 A, ensuring…

This M12 connector cable features a 3-pole configuration and has a total length of 1.5 meters, making it suitable for various sensor and actuator applications. The cable comprises a pin connection…

The UTP RJ45 Cat 6 Up/Down 45° Angled Jack Module is engineered to facilitate the termination of 4-pair, 22-26 AWG twisted pair cables, enhancing cable management in confined spaces. This module is…

The CENTER SUPPORT for the 12X4 system provides structural support from below using a threaded rod. The bracket attaches securely to the rod with two nuts and includes pre-assembled slide clamps for…

The Locking Clamp Tie is designed for securing cable bundles to surfaces such as control panels, communication racks, or ceilings. With a length of 12 inches (304.8 mm) and a body width of 0.19…

The LSZH split hinged cover is tailored for the FiberRunner channel model FR4X4LBL3. This cover facilitates flexible installation with its snap-on hinge feature, which allows for positioning at…

This OM4 duplex fiber patch cord is designed for high-performance applications, with a cable jacket diameter of 2.0mm and a length of 10 meters . It incorporates LC Duplex connectors with a Uniboot…

The 12 Fiber Trunk Cable Assembly with OM5 fiber type is designed for efficient data transmission in indoor environments. It features a 23-meter length and is compliant with Low Smoke Zero Halogen…

The OS2 duplex fiber patch cord is designed with a 2.0mm outer diameter and is rated for plenum use (OFNP). It features LC Uniboot pull-boot connectors on both ends, ensuring a streamlined connection…

The Vertical Single-Sided Cable Manager, designed for 42 rack units, features a width of 12 inches. Constructed with a steel body and a molded plastic finger assembly, this manager is tailored for…

This product comprises a set of 10 symmetrical DIN rails, each with a real length of 214 mm, specifically intended for Thalassa TBS and Thalassa TBP enclosures. Constructed from zinc-coated 1mm steel…

This product features a 5 m cable length and has 4 poles with a straight pin configuration. The connector adheres to the IEC 61076-2-101 standard and provides a reliable connection with a rated…

The SAIL-M8GM8WR-3-1.5U is designed for sensor and actuator integration, featuring an M8 to M8 connection with 3 poles. This connector has a length of 1.5 meters and is constructed from a PUR sheath…

This M12 connecting line is designed for sensor and actuator applications, featuring a configuration of 3 poles and a length of 2 meters. The connection type is M12 / M12 with twin cabling, including…

The SAIL-7/8W-4-10U is designed as a sensor and actuator line, with one end lacking a connector. It is equipped with a 7/8" connection thread and features a configuration of 4 poles, which includes 3…

This product is a sensor/actuator line designed with a 3 m cable and an angled M12 socket, accommodating 5 poles. The connection thread conforms to the M12 standard, and the outer sheath is made from…