Niederspannungsschaltanlagen

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 20A resistive load rating. Contactor is supplied with a 24 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Pressure wire connectors are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The CE4T-10R-02 Emergency stop switch, a compact and efficient solution, is designed to provide a secure emergency shutdown mechanism. This switch features a twist release mechanism, ensuring easy operation in critical situations. Its maintained design guarantees continuous readiness, while the mushroom 40 mm button adds to its ergonomic comfort. The switch is available in red color for easy identification and comes with a non-illuminated feature, reducing potential distractions during use. It operates on a 2NC circuit, ensuring reliable operation under various conditions.The CE4T-10R-02 Emergency stop switch is rated for voltage ranges from 24 to 300 V, making it suitable for a wide range of industrial applications. Its compact design and robust construction ensure durability and reliability in demanding environments. This switch is an essential component in any safety system, providing peace of mind to operators and owners alike.

The 3VA21 4P 100A 85KA ETU5-LSIG NUT is a low voltage molded case circuit breaker designed for industrial applications. This device operates within a rated voltage of 690V and is rated for a permanent current of 100A. It features a 4-pole configuration, making it suitable for line protection.With a high breaking capacity classified as H, this circuit breaker can handle an impressive short-circuit breaking capacity of 85kA at 415V. The ETU560 trip unit provides advanced features including overload protection settings ranging from 40A to 100A, and adjustable short-circuit protection settings with a delay feature. The device can be mounted on a DIN rail, facilitating installation in various electrical panels.Additional specifications include an IP40 degree of protection, indicating suitability for indoor use in non-harsh environments. The connection for the main current circuit is positioned at the front side, utilizing screw connections for secure electrical contact. A nut keeper kit is included for enhanced connectivity.

Die Siemens BRKR 3VA11 3P 63A 25KA ATFM BOX ist ein leistungsstarker Niederspannungs-Kompaktleistungsschalter, der für den zuverlässigen Schutz elektrischer Systeme entwickelt wurde. Ausgestattet mit einer thermisch-magnetischen Auslöseeinheit sorgt dieser Leistungsschalter für einen effektiven Überlast- und Kurzschlussschutz. Der Rahmen 3VA11 bietet ein geringes Bruchvermögen (Klasse N) und eignet sich daher für verschiedene industrielle Anwendungen.Dieser Leistungsschalter ist für 63 A ausgelegt und arbeitet mit einer 3-poligen Konfiguration. Er hat eine Schaltkapazität von 25KAIC bei 415V und 7KAIC bei 690V. Die TM220-Auslöseeinheit ist mit einem einstellbaren IR und einem festen Ii ausgestattet, was eine präzise Anpassung an spezifische Schutzanforderungen ermöglicht.Zu den besonderen Merkmalen gehören ein Anschluss mit Kastenklemme und umlaufender Stahllasche, die für sichere und zuverlässige Verbindungen sorgen. Die kompakten Abmessungen von 3 x 5,1 x 3,5 Zoll erleichtern die Integration in verschiedene Setups und bieten Flexibilität und einfache Installation.Dieser Leistungsschalter ist ideal für den Einsatz in industriellen Umgebungen, in denen zuverlässiger Schutz und einstellbare Einstellungen von entscheidender Bedeutung sind. Es entspricht den einschlägigen Industriestandards und gewährleistet Sicherheit und Leistung.

This relay features three changeover (CO) contacts with a test button made of AgCdO. It operates at a rated control voltage of 48 V AC and supports a continuous current of 16 A. The relay utilizes flat blade connections measuring 4.8 mm x 0.5 mm for easy integration into existing systems.With a mechanical service life of 10 million switching cycles, it is designed for durability and reliability in various applications. The relay is equipped with a red LED status indicator and has a pull-in voltage of approximately 38.4 V AC and a drop-out voltage of about 14.4 V AC, ensuring effective performance during operation.Compliance with IEC 61810-1:2008 and other international standards is assured, making it suitable for diverse industrial environments. The device has a compact design with dimensions of 36 mm x 36 mm x 48 mm and weighs 90.7 g. Additionally, it has a protection degree of IP20, and can operate in temperatures ranging from -40 °C to +60 °C.

The Harmony RE48 timer relay is designed for versatile applications. It can be set between 0.2 seconds and 300 hours, providing a broad range of timing options. With an output rating of 5A, this relay is capable of handling high-current loads. Its compact design, at 22.5mm wide, makes it suitable for both panel mounting or socket plug-in installations. The relay features a sealable cover and simple rotary trimmer settings for easy installation and precise adjustments. It's designed to be flexible in your system design, allowing you to stock spares efficiently. This multifunction timer is ideal for integration into hard-wired logic schematics, making it a great choice for refurbishing old installations without the need for a PLC. It also offers a status display with 2 LEDs, allowing you to visually inspect your system's status.

The switch disconnector MTZ2 32HF features a fixed design and operates with a rated current of 3200A. It is capable of handling a maximum operational voltage of 690VAC at 50/60Hz. The device has a rated short-circuit making capacity (Icm) of 187kA peak at 690VAC within the AC-23A category. This model is engineered to protect electrical systems from potential damage due to overloads, short circuits, and ground faults.With a rated short-time withstand current (Icw) of 85kA rms for 1 second, the MTZ2 32HF is designed for robust distribution applications. Its dimensions are 537mm in width, 352mm in height, and 300mm in depth, making it suitable for various installation environments. The device is compliant with international standards including IEC/EN 60947-1 and IEC/EN 60947-3.This unit can be integrated into EcoStruxure architecture systems and comes with options for various functions and accessories, enhancing its adaptability in complex setups. The mechanical durability is rated for 20,000 cycles with periodic maintenance, while the electrical durability supports up to 5,000 cycles at 440V AC within the AC-23A category.

This product is part of preventa XPCMC configurable safety controller range. It is a configurable safety controller. It is supplied with 24 V DC. It has 16 safety inputs. It conforms to Category 4 maximum conforming to EN 954-1/EN/ISO 13849-1, PLE safety level conforming to EN/ISO 13849-1 and SIL 3 level conforming to IEC 61508. It embeds 1 RJ45 port for a serial link communication with Modbus protocol. The transmission rate are 1200bps, 2400 bps, 4800bps, 9600bps or 19200bps. This product measures 153mm depth, 151.5mm height, and 74mm width. It weighs 0.82kg. This safety controller is designed for monitoring multiple safety functions such as emergency stop, guard monitoring, perimeter guarding, position monitoring, speed monitoring and enabling movement. This product is certified by CSA, UL and TÜV. It conforms to EN 954-1/EN/ISO 13849-1, EN/IEC 61496-1, IEC 61508, EN/IEC 60204-1, EN 1760-1/ISO 13856-1, EN 574/ISO 13851 and EN/IEC 60947-5-1 standards. The Safety controller XPSMC is configurable and addressable using software XPSMCWIN running on a PC and using a USB/RJ45 cable type TCSMCNAM3M002P to connect to the safety controller. It installs with a mounting plate for mounting on rail. Preventa XPSMC configurable safety controller is designed to provide a solution for safety applications requiring conformity to Performance Level PL e/Category 4 EN ISO 13849-1 and SIL3 EN/IEC 61508. The configurable safety controller consists of 6 variants with 16 or 32 digital inputs and 8 digital outputs and communication possibilities of Modbus RTL Serial, Profibus DP and CANopen.

TeSys F contactor, 3 poles (3NO), 330A/1000V AC-3, for motor applications up to 160kW@400V. Contactor with no coil to allow a later selection and installation (coil to be ordered separately), it provides bolt terminals for bars or cables with lugs. For high operating rates until 2400 cycles/hour and environments until 55°C, it procures high reliability and durability. It makes installation and maintenance easy thanks to a drawer for insertion of the selected coil and a large choice of add-on blocks and accessories (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

This XPSAC safety module monitors emergency shutdown pushbuttons and limit switches. It meets the requirements of Performance Level PL e/Category 4 conforming to standard EN/ISO 13849-1 and SILCL3 conforming to EN/IEC 61508 and EN/IEC 62061. It can be used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1. It has additional solid-state output for communication with PLCs about safety status of your process.

This Multi9 C60SP is a low voltage miniature circuit breaker (MCB). It is a 2P circuit breaker with 2 protected poles, 40A rated current and C tripping curve. The rated short circuit breaking capacity goes up to 10kA at 415VAC conforming to EN/IEC 60947-2 standard and 10kA at 415VAC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 240VAC. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 6kV. The product can be clipped on a DIN rail. Its width is 4 pitches of 9mm. Pollution degree is 3. The product colour is light grey (RAL7035). The dimensions are (W) 36mm x (H) 81mm x (D) 72mm. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -30°C to 70°C. The storage temperature is -40°C to 80°C.

The Schneider Electric Multi9 C60SP is a state-of-the-art miniature circuit breaker (MCB), specifically designed to offer superior protection against electrical hazards. It is a 3P circuit breaker with a rated current of 6A and a D tripping curve, ensuring optimal performance under various conditions. This MCB boasts a high short-circuit breaking capacity of up to 10kA at 415VAC, complying with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It is UL1077 and IEC/EN 60947-2 certified, ensuring its reliability and safety. The Multi9 C60SP is an ideal choice for original equipment manufacturers (OEM) and control panel builders due to its robust design and high electrical endurance of up to 10000 cycles. It also features a mechanical endurance of up to 20000 cycles, making it a reliable and durable solution. This MCB is designed to fit on a DIN rail with a width of 6 pitches of 9mm. Its pollution degree is 3, and the product color is light grey (RAL7035). The dimensions are (W) 54mm x (H) 81mm x (D) 72mm. The Multi9 C60SP offers a high degree of protection with an IP20 rating on its terminals, as per IEC/EN 60529. It operates at temperatures ranging from -30°C to 70°C and can be stored at temperatures ranging from -40°C to 80°C.

The 3VA11 3P 100A 25KA FTFM BOX is a low voltage molded case circuit breaker designed for reliable protection in electrical systems. It is equipped with a thermal-magnetic trip unit, specifically the TM210, which has fixed overload protection set at 100A and short-circuit protection at 10 times the rated current. This device operates at a rated voltage of 690V and is configured with a 3-pole design, allowing for effective line protection. The breaking capacity is rated at 25kA at 415V, which supports its application in various industrial environments. It features a robust frame clamp connection located at the front side for ease of installation. With an IP40 protection degree, the circuit breaker is suitable for indoor use, ensuring durability and operational integrity. The overall dimensions measure 3 x 5.1 x 3.5 inches, allowing for compact installation in confined spaces. The device does not include an integrated motor drive or earth fault protection but is complete with a protection unit, making it a versatile addition to electrical control systems.

The TeSys F AC Coil, designed for 110-115V and operating at frequencies of 40-400Hz, is a low consumption component that provides high tolerance to voltage drops. This coil is compatible with TeSys F 3-pole and 4-pole contactors LC1 F185, FG185, and F225.The TeSys F AC Coil operates within a voltage range of 0.85-1.1 Uc and can withstand environments up to 55°C. It offers high operating rates for the contactor, capable of handling up to 2400 cycles per hour.This coil is RoHS/REACh compliant, ensuring it meets Green Premium standards.

The 3VA24 4P 400A 55KA ETU8-LSIG NUT is a low voltage molded case circuit breaker designed for effective line protection. It operates at a rated voltage of 690V with a medium breaking capacity of 55kA at 415V, ensuring reliable performance under various conditions.Equipped with the ETU860 electronic trip unit, this device offers advanced overload protection, adjustable from 160A to 400A, along with short-circuit protection settings between 0.6 to 10 times the rated current. The integrated earth fault protection enhances safety by providing additional safeguards against ground faults.With dimensions of 7.2 x 9.8 x 5.4 inches, it is designed for built-in installation and can be mounted on a DIN rail. The device features a front-side connection for the main current circuit and utilizes screw connections for electrical connections, ensuring a secure setup. The rocker lever control element allows for straightforward operation.For applications requiring flexibility, the circuit breaker provides options for motor drive integration, although it is not included in this model. The degree of protection is rated at IP40, making it suitable for various industrial environments.

The CT-ERE is a single-function electronic time relay from the CT-E timer range. It provides an ON-delay (delay on make) function with a time range from 0.1 s to 10 s. This time relay operates with a rated control supply voltage of 24 V AC / DC / 220 - 240 V AC and has a 1 c/o (SPDT) output rated at 250 V / 4 A.

Load disconnector 3LD3, Iu 40 AMain switch 3-pole + N Ratedoperating capacity at AC-23 Aat 400 V 18.5 kW floor mountingBasic switch with door couplingCentral hole mounting 22.5mmToggle drive red / yellow 48x48

The 3VA21 circuit breaker is designed for low voltage applications, featuring a four-pole configuration with a rated current of 160A. This device exhibits a high breaking capacity, rated at 85kA at 415V and 2.5kA at 690V, making it suitable for various protective functions. Equipped with the ETU560 electronic trip unit, this model includes overload and short-circuit protection capabilities. Adjustable settings for short-circuit protection range from 0.6 to 10 times the rated current, while the overload protection is adjustable from 63A to 160A. The device also provides ground-fault protection, which can be deactivated as needed. In terms of physical specifications, the breaker has dimensions of 5.5 x 7.1 x 4.2 inches and is suitable for mounting on a DIN rail. The protection degree is rated at IP40, ensuring adequate safety in various environments. The front-side connection for the main current circuit utilizes a screw connection type, facilitating secure installation.

The Schneider Electric TeSys GV motor circuit breaker, designed for 3-phase motor applications, offers a robust thermal-magnetic protection mechanism with a thermal setting range of 1.6-2.5A and magnetic tripping at 13xIn. This high breaking capacity device, rated at Icu 100kA@400V, is equipped with spring terminals for easy connection. The start-stop control is guaranteed for 100,000 cycles AC-3, ensuring reliable operation. The TeSys Deca Manual Starter and Protector is certified to multiple international standards, including IEC, UL, CSA, CCC, EAC, Marine, and ATEX. It also complies with Green Premium standards (RoHS/REACh).

The SENTRON Switch Disconnector 3LD Main Switch is a robust and reliable electrical component designed for high-performance applications. With a 4-pole configuration and an Iu rating of 16 A, this switch ensures efficient power distribution while maintaining safety standards. The operating power is rated at 23 A at 400 V, with a maximum capacity of 7.5 kW, making it suitable for various industrial environments.Featuring a front-mounted rotary operating mechanism, this switch offers easy accessibility and operation. Its black color provides a sleek appearance while blending seamlessly into any industrial setting. The 4-hole mounting of the handle ensures secure installation and convenient handling during maintenance operations.