Niederspannungsschaltanlagen

The SITOR fuse link is designed to provide reliable protection in various applications. It features blade contacts and is rated for 16A AC at 690V with a front indicator for easy monitoring.This product adheres to the DIN 43620 standard, ensuring compatibility and interoperability with other SITOR components. Its size 000 designation indicates its compact form factor, making it suitable for applications where space is limited.

The MasterPact MTZ2 16NA is a 3-pole switch disconnector specifically designed for drawout applications, rated for a maximum operational current of 1600A. It operates at a voltage of up to 690VAC within 50/60Hz frequency, making it suitable for various distribution systems. This model features a rated short-circuit making capacity (Icm) of 88kA peak at 690VAC, ensuring robust protection against short circuits. Its rated short-time withstand current (Icw) is 42kA for 1 second, enhancing its capability to handle transient conditions. The dimensions of the device are 441mm in width, 439mm in height, and 403mm in depth. Compliant with international standards IEC/EN 60947-1 and IEC/EN 60947-3, the MasterPact MTZ2 can be integrated into EcoStruxure architecture systems. The device's design allows for various optional functions and accessories, which must be ordered separately. Additionally, it is suitable for isolation and provides a control type interface via push-button.

TeSys Deca mechanical latch block, for LC1D09-D80A, LC1DT20-DT80A contactors and CAD control relays (except devices with low consumption coils). Electrical latching and unlatching is performed applying a 24V control voltage pulse (> 100ms in AC, 250ms in DC). Unlatching can be manually operated. Clip-on mounting on front of contactor, connection by screw terminals. For applications with high operating rates until 1200 cycles/hour. Multi standards certified (IEC, UL, CSA), Green Premium compliant (RoHS/REACh).

The Single Relay REL-IR4/L- 24AC/4X21AU is designed for industrial applications requiring reliable switching. This relay features four changeover contacts and is constructed with hard gold plating to enhance durability. The coil operates at a nominal voltage of 24 V AC, with an input voltage range of 18.7 V AC to 33.1 V AC at 20 °C.In addition to its robust design, the relay includes a test button and a status LED for easy monitoring. The mechanical service life is approximately 20 million cycles, ensuring long-term reliability. It has a typical response time of 5 to 15 milliseconds, depending on the phase relation, and a typical release time ranging from 5 to 20 milliseconds.Electrical ratings include a maximum switching voltage of 250 V AC/DC and a minimum switching voltage of 5 V at 24 mA. The relay can handle a maximum inrush current of 16 A for 20 ms and has a limiting continuous current of 6 A. It is designed to operate in ambient temperatures from -40 °C to 55 °C and has a degree of protection classified as RT I. Compliance with IEC 60664 standards ensures its suitability for harsh environments, categorized as ISA-S71.04 G3.

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The additional I/O module provides 4 discrete inputs, 2 discrete outputs and 2 analogue inputs/outputs. It provides protection from reverse polarity on input. It is furnished with spring terminal for electrical connection. It weighs 0.45kg. This range is compatible with Lexium 32 servo drives. This product is compatible with Lexium 32M. Lexium 32 is a servo drive range with three or four servo drive models and two servo motor families plus an intelligent selection of options. Servo drives and servo motors from 0.15kW to 7kW for maximum performance.

The Class J Fused Disconnect is designed for high-performance applications, rated at 600V and 60A. This device is compliant with UL 98 standards and is marked with CE certification, adhering to IEC 60947-3 regulations. It is a service entrance device capable of both load-make and load-break operations at full rated capacity.Notably, the switch features a compact footprint, allowing for versatile installation. The modular design permits the handle to be positioned anywhere across the poles, enhancing accessibility. A safety feature prevents the fuse doors from opening while the switch remains in the 'ON' position, ensuring operational safety. Additionally, the double-break contact type isolates the fuse clips from voltage during fuse replacement, mitigating risks during maintenance.For testing purposes, the switch includes a 'Test' position that activates auxiliary contacts without requiring main power. Power taps facilitate the energization of a CPT or surge device without the need for an additional terminal block. The unit supports a wide range of ergonomic handles and accessories to suit various operational needs.This model features an operating temperature range from -5 °C to 40 °C, with storage capabilities from -25 °C to 55 °C. It has a short circuit current rating (SCCR) of 200 kA and a rated insulation voltage of 1000 V. The device can accommodate wire connections in a range from #14 to #4 and is installed using a direct screw mount method.

The DEK-REL- 24/O/1 is a relay terminal block equipped with soldered miniature relays, suitable for small to medium loads. It features one normally open (N/O) contact, operating at an input voltage of 24 V AC/DC, and is designed for assembly on NS 35/7.5 with a terminal width of 6.2 mm.Constructed for a long mechanical service life of approximately 20 million cycles, this module operates under an overvoltage category of III and a pollution degree of 2. The typical input current at nominal voltage is 6.5 mA, with a response time of 5 ms and a release time of 15 ms. The contact material is crafted from AgNi, hard gold-plated, allowing for a maximum switching voltage of 250 V AC and a limiting continuous current of 3 A.With an ambient temperature range of -20 °C to 50 °C for operation, and -20 °C to 70 °C for storage, the module is suitable for diverse environmental conditions. The connection method utilizes screw connections, supporting conductor cross-sections from 0.2 mm² to 2.5 mm². Additionally, a bridge rectifier is included for protective circuitry, along with a yellow LED for operating voltage display.

The Harmony 9001K is a modular push button that boasts a chromium-plated metal bezel, round shape, and a mushroom head of 40mm. It comes with one NC contact and operates with a stay-put mechanism. The 2-position operation makes it suitable for situations where quick actions are necessary for a process or machine to function correctly. Its impact resistance, dust resistance, water resistance, and vibration resistance (IP66 rating) make it ideal for harsh environments.The mushroom head design of this push button is easily distinguishable at a distance due to its prominent shape. The metal bezel and body are corrosion resistant, ensuring the product continues to operate even after severe accidents. This red push button can be combined with Harmony range of contact blocks for various control functions.

The 3VA21 circuit breaker is designed for low voltage applications, featuring an IEC molded case structure and an electronic trip unit. With a high breaking capacity classified as class H, it supports a rated voltage of up to 690V, achieving an impressive Icu of 85kA at 415V. Equipped with the ETU860 trip unit, this device includes a metering function and offers adjustable overload protection settings between 16A and 40A. The short-circuit protection is customizable, with settings for delayed and undelayed releases, ensuring flexibility for various applications. The circuit breaker is built to accommodate a clamp connection, featuring a robust construction suitable for mounting on DIN rail (top hat rail). Its design includes IP40 protection, ensuring reliability in diverse environments. With dimensions of 5.5 x 7.1 x 4.2 inches, this device integrates earth fault protection and is capable of a motor drive connection, albeit not integrated. The construction is optimized for easy installation and maintenance.

This Multi9 C60SP is a low voltage miniature circuit breaker (MCB). It is a 4P circuit breaker with 4 protected poles, 25A rated current and B tripping curve. The rated short circuit breaking capacity goes up to 10kA at 415VAC conforming to EN/IEC 60947-2 standard and 10kA at 415VAC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 240VAC. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 6kV. The product can be clipped on a DIN rail. Its width is 8 pitches of 9mm. Pollution degree is 3. The product colour is light grey (RAL7035). The dimensions are (W) 72mm x (H) 81mm x (D) 72mm. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -30°C to 70°C. The storage temperature is -40°C to 80°C.

Designed for versatility, the Relay DRW370024LT includes three change-over (CO) contacts equipped with a lockable test button, constructed from AgCdO. With a rated control voltage of 24 V DC, this relay supports a continuous current of 16 A, making it suitable for various applications. The relay incorporates flat blade connections measuring 4.8 mm x 0.5 mm for streamlined wiring. The unit's dimensions are compact at 36 mm x 36 mm x 48 mm, and it weighs 85.1 g. Notably, it features a mechanical service life of up to 10 million switching cycles and a contact resistance of ≤ 50 mΩ. For operational reliability, the relay's rated switching voltage reaches 400 VAC, with a maximum switching voltage of 400 V AC and 250 V DC. It exhibits an inrush current of 80 A for 50 ms and can handle an AC switching capacity of up to 6400 VA. The switching frequency can reach 1 Hz at rated load. Environmental compliance is ensured with approvals such as CE, cURus, and EAC, and it adheres to standards like IEC 61810-1 and EN 60664-1. The relay operates effectively within a temperature range of -40 °C to 60 °C and a relative humidity of 35% to 85%. Its protection degree is rated at IP20, ensuring adequate insulation and durability.

Harmony 22 mm modular push buttons, selector switches, pilot lights are designed for industry. This range combines simplicity of setup, flexibility and a robust construction. An ingenious locking system consisting of a snap fit head and body that can be tightened with a single screw but still ensuring an easy and yet secure mounting. Harmony XB4/ZB4 are 22 mm chromium plated metal modular push buttons, selector switches and pilot lights connecting to fully metal mounting collar. The operators can be purchased as complete operators or various modules that can be assembled to meet the user’s specific requirement. Harmony XB5/ZB5 are 22 mm plastic modular push buttons, selector switches, pilot lights. The operator can have a round and square plastic bezel. The contacts can be used for low load electrical contact and high power applications. Shake proof connection screws make periodic retightening unnecessary. A complete set of accessories to provide a solution for applications where exposure to high pressure cleaning, dust and extreme temperatures is an everyday occurrence. These harmony 22mm push buttons are used by machine manufacturers (automotive, textiles, timber) and control system panel builders. Certified and approved for meeting requirements throughout all continents: EN/IEC, UL, NEMA, CSA, CCC, Gost, JIS and many more. They have UL and CE markings and have ratings up to IP66 and IP69K.

The FUSE LINK LV HRC, a high-quality fuse element designed for reliable protection in various applications. With a rating of 630A and a voltage capacity of 500VAC/440VDC, it ensures safe operation under demanding conditions. The front indicator provides easy visual monitoring, while the live grip lugs ensure secure connection.This fuse element is designed for non-insulated environments, making it suitable for a wide range of applications. Its robust construction and high performance make it an ideal choice for LV HRC applications. The NH4a designation indicates its compatibility with various systems.

Dieser modulare schwarze Schlüsselschalter Harmony XB5 (Schlüssel Nr. 455) hat 2 Positionen, arbeitet mit einem Rastmechanismus mit Schlüsselentnahme in der linken Position und verwendet Schraubklemmen. Dieser Schlüsselschalter bietet eine vielseitige Schnittstelle zur Steuerung Ihrer Maschinen. Er ist einfach in Standard-22 mm-Ausschnitte zu installieren und über einfache Schraubklemmen mit Ihren Steuerstromkreisen zu verbinden. Er bietet einen sicheren Weg für autorisiertes Personal, zwischen Prozess- oder Maschinenbetriebsmodi zu wechseln. Er ist stoßfest, staubdicht, wasserfest und vibrationsfest dank seiner IP69-Klassifizierung, was ihn ideal für den Einsatz in rauen Umgebungen macht. Sein Kunststofffrontplattenmaterial ist ideal für Anwendungen, die eine gute Beständigkeit gegen chemische Stoffe und/oder doppelte elektrische Isolierung erfordern.

The Motor Starter Protector MSP, an IEC component of the SIRIUS system, is designed for group installation in conductor protection applications. This Group Tap Conductor Protector features a trip class of 10 and a current rating of 1.1-1.6 Amps, with a frame size of S00. It incorporates screw terminals for easy connection, making it a reliable solution for motor protection. UL File E47705 in Vol. 7 Sec. 6 confirms its compliance with industry standards.This component is designed to provide standard switching capacity and is suitable for A-release applications at current ratings of 1.1-1.6 Amps, as well as N-release applications at a higher current rating of 21 Amps. The screw terminals facilitate easy installation and connection.

The TeSys Deca Capacitor Contactors are designed for efficient and reliable switching of three-phase capacitor banks, with a capacity of up to 12.5kVAR at 400V/50Hz (or 21kVAR at 690V). These contactors feature a 230V AC coil operating at 50/60Hz and are equipped with front-mounted early make poles, pre-wired damping resistors for current limitation, and instantaneous auxiliary contacts (1NO+2NC).The TeSys Deca Capacitor Contactors are compact, measuring only 45mm in width, and can be mounted on DIN rails or via screw fixing. They are certified to IEC 60947 standards and comply with the shunt capacitors standard IEC 60831. Additionally, they are Green Premium products, adhering to RoHS/REACh regulations.

TeSys D replacement coil 230V AC 50/60Hz, for TeSys D contactors. To be used with 3 and 4-pole contactors LC1 D09 to D38 and LC1 DT20 to DT40. It operates in the voltage limits 0.8-1.1 Uc (50Hz), 0.85-1.1 Uc (60Hz) and environments until 60°C Green Premium compliant (RoHS/REACh).

TeSys Control Switch Disconnector: The VCCF1 is a 3-pole TeSys Vario switch-disconnector from Schneider Electric, designed for main and emergency stop switching in motor applications up to 11KW@400V AC-23. This robust solution is composed of a V1 switch body, extension shaft, red padlockable handle, and a yellow 60x60mm front plate. The TeSys Control Switch Disconnector is rated at 32A 690V and is suitable for enclosure back mounting with a 4 screw fixing handle. It ensures IP65 protection to the mounting, making it an ideal choice for applications where environmental conditions are challenging. The TeSys Control Switch Disconnector is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHS/REACh). It offers a possible distance between the back of the enclosure and door ranging from 300 to 330mm.

This Harmony XB5, modular black key selector switch (key no.455) has 3 positions, operates with a stay-put mechanism with key withdrawal on left, center and right position and uses screw-clamp terminals. This key selector switch provides a versatile interface for controlling your machines. It is easily installed into standard 22mm diameter cut-outs and connected with simple screw-clamp connections. It provides a secure manner for authorized staff to switch between process or machine operating modes. It is impact resistant, dust resistant, water resistant and vibration resistant thanks to its IP66 and IP69K, making it ideal for operation in harsh environments. Its plastic bezel makes it ideal for applications requiring good resistance to chemical agents and/or double electrical insulation.

PLC-INTERFACE, consisting of DIN-rail-mountable basic terminal block in 14 mm with screw connection and plug-in relay with power contact, 2 changeover contacts, 24 V DC input voltage. Approved according to ATEX/IECEx (Zone 2) and Ex Zone Class I, Div. 2.