Niederspannungsschaltanlagen

Dieses Micrologic 5.0 X ist ein fortschrittliches elektronisches Steuergerät, das für den Einsatz mit den festen Leistungsschaltern Masterpact MTZ1, MTZ2 und MTZ3 entwickelt wurde. Es ist kompatibel mit MTZ1 06 bis MTZ1 16, MTZ 08 bis MTZ2 40, MTZ3 40 bis MTZ3 63, alle in fester Ausführung. Masterpact MTZ ist die letzte Generation von Druckluft-Hochleistungsschaltern bis 6300 A, die mit fortschrittlichen digitalen Technologien ausgestattet sind. Es wurde entwickelt, um elektrische Systeme vor Schäden durch Überlastungen, Kurzschlüsse und Gerätefehlern zu schützen. Die Micrologic X-Steuereinheit kann jederzeit mit digitalen Modulen angepasst werden, um neue Schutz-, Mess- oder Diagnosefunktionen hinzuzufügen. Diese Steuereinheit bietet mehrere Kommunikationskanäle, darunter Ethernet, Modbus SL und drahtlose Kommunikationsmöglichkeiten. Das Micrologic 5.0 X verfügt über einen einstellbaren Langzeitschutz gegen Überlastung, einen Kurzzeitschutz und einen sofortigen Schutz gegen Kurzschlüsse. Mit seinem integrierten HMI mit Hintergrundbeleuchtung ermöglicht es die schnelle Identifizierung von Alarmmeldungen. Die vom Micrologic 5.0 X verarbeiteten Informationen können auf dem HMI mit integrierter Hintergrundbeleuchtung, auf einem Smartphone über Bluetooth oder NFC und auf einem PC über die USB-Verbindung angezeigt werden. Die Schutzmaßnahmen können über das eingebettete Display, ein Smartphone über Bluetooth, mit einem PC mit EcoStruxure Power Commission und zusätzlich über Ethernet und Modbus SL-Kommunikation eingestellt werden. Masterpact MTZ und Micrologic X sind Teil des EcoStruxure-Architektursystems.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 40A resistive load rating. Contactor is supplied with a 24 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.58 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

This is a MN undervoltage release for Compact NSX, PowerPact Multistandard and EasyPact CVS circuit breakers. Its rated voltage is 380 to 415 VAC 50/60 Hz, or 440 to 480 VAC 60 Hz. It is an auxiliary used for emergency off or remote opening applications. This auxiliary opens the circuit breaker when the control voltage drops to a value below 35% of its rated voltage Un. It complies with IEC 60947-2 standard. This undervoltage release is a UL Listed/CSA Certified circuit breaker accessory. Compact NSX, PowerPact Multistandard and EasyPact CVS can be equipped with either 1 MX or 1 MN auxiliary.

This product is a UL1077 Rated Mini Circuit Breaker, designed to provide protection in electrical systems. It is rated for 480 VAC and has a trip characteristic of Curve C. The circuit breaker is a 2-pole device, capable of handling up to 50 Amps. It features a compact design with dimensions of 36mm width and 70mm depth.This miniature circuit breaker is suitable for use in various applications where high reliability and safety are paramount. It is designed to meet the stringent requirements of UL standards, ensuring its performance under a wide range of conditions.

The Eaton M22 Modular Two Position Key-Operated Selector Switch is designed for reliable and secure operation in industrial environments. Featuring a 22.5 mm size, this selector switch offers a momentary action with return from the right and key removal from the left. The non-illuminated switch comes with a silver bezel and a black button, ensuring durability and ease of use.Engineered to meet stringent standards, the M22 selector switch boasts an IP66, NEMA 4X, and NEMA 13 environmental rating, making it suitable for harsh conditions. The switch is capable of withstanding up to 100,000 operations, ensuring long-term reliability. It is also compliant with various international certifications, including CE, Bureau Veritas, GoST-R, CCC, CSA, and Lloyd's Register.Ideal for a wide range of applications, the Eaton M22 selector switch is perfect for motor control and other industrial control systems. The product includes one key and a contact block mounting adapter, with removal positions that can be modified in the field using coding adapters.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 38A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 10HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC and 25HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 5HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 80A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.98 inches deep. It weighs 1.19 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The Harmony XB4 spring-return metal push button is a reliable and durable solution for controlling machinery and processes. Its yellow color and clear markings make it easy to identify during installation and maintenance operations. This push button features a robust metal bezel and operates with a spring return / impulse mechanism, providing simple and effective control. It can be easily installed into standard 22mm diameter cut-outs and connected using screw-clamp connections. The Harmony XB4 is designed to operate in harsh environments, with impact resistance, dust resistance, water resistance, and vibration resistance. Its IP66 / IP67 / IP69 / IP69K rating ensures it can withstand a wide range of conditions.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 25A resistive load rating. Contactor is supplied with a 110 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

This product is part of the Lexium ILA, ILE, ILS range, an offer of motion integrated drives for motion control. The communication interface insert provides two I/O signals and a STO signal. It is furnished with 4-pin M8 male connector for safe torque off and two 3-pin M8 female connectors for 2 I/O signals. It weighs 0.036kg. It is compatible for use with Lexium integrated drives. The kit includes 1 insert with connectors and 1 insert for sealing (IP54).

This pre-assembled relay module is designed with screw connection for easy installation. It comprises a relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket. The module offers 3 changeover contacts, ensuring versatile functionality. With an input voltage of 230 V AC, it is suitable for a wide range of applications.The relay base provides a solid foundation for the module, while the power contact relay ensures reliable switching. The plug-in display/interference suppression module enhances signal integrity and reduces noise interference. The retaining bracket adds stability to the assembly.

This standard MN undervoltage release is designed for use with Schneider Electric's Compact NSXm and PowerPact B devices. This auxiliary is ideal for emergency off or failsafe remote tripping applications. It features a one-click spring type design for easy installation, visible from the front face of the device. The MN auxiliary has a rated voltage of 220/240 VAC at 50Hz or 208/240 VAC at 60Hz. It trips the circuit breaker when the control voltage drops below 35% of its rated value, complying with IEC 60947-2 standard. The Compact NSXm and PowerPact B devices embed either 1 MN or 1 MX coil.

VBF3 is a 3-pole TeSys Vario switch-disconnector from Schneider Electric for main switching in motor applications 22kW@400V AC-23. For door mounting with 4 screw fixing, it provides a black & grey operator with IP65 protection. VBF3 is a 3-pole TeSys Vario switch-disconnector from Schneider Electric for main switching in motor applications 22kW@400V AC-23. It consists of a V3 Vario switch body and a padlockable black & grey operator to be mounted on door with 4 screws fixing. It ensures an IP65 protection to the mounting. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Vario 3-pole rotary switch disconnector for door mounting. Composed with a switch body V3 and a black & grey operator, for main switching, padlockable. Ensures an IP65 protection to the mounting. Rated for 690V AC operation, DC operation is permitted until 250V, performance depending on the number of contacts in series. Possible attachment of 4 add-on poles (2 in each side) , main (VZ3), neutral (VZ12), earthing (VZ15), auxiliary (VZ7, VZ20).

Introducing the SIEMENS low voltage circuit breaker, a reliable solution for electrical protection. This product boasts a robust 3VA IEC frame, ensuring high breaking capacity of class N. The 63A 4-pole Icu provides comprehensive line protection, with thermal and magnetic trip units for enhanced safety.The TM240 trip unit offers adjustable Ir and Ii values, providing flexibility in your electrical system design. This circuit breaker also features a special connection with box terminals and steel wrap around lugs for secure and efficient connections. With dimensions of 4 x 5.1 x 3.5 inches, it's designed to fit seamlessly into any electrical panel.This SIEMENS product is not just about safety, but also about efficiency. It offers overload protection with Ir ranging from 44A to 63A and short-circuit protection with Ii ranging from 5xIn to 10xIn. The unprotected clamp connection ensures easy and efficient conductor handling.

This Multi9 C60SP is a low voltage miniature circuit breaker (MCB). It is a 4P circuit breaker with 4 protected poles, 25A rated current and C tripping curve. The rated short circuit breaking capacity goes up to 10kA at 415VAC conforming to EN/IEC 60947-2 standard and 10kA at 415VAC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 240VAC. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 6kV. The product can be clipped on a DIN rail. Its width is 8 pitches of 9mm. Pollution degree is 3. The product colour is light grey (RAL7035). The dimensions are (W) 72mm x (H) 81mm x (D) 72mm. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -30°C to 70°C. The storage temperature is -40°C to 80°C.

The TeSys D contactors are engineered for seamless integration into control systems, catering to diverse application needs. These contactors come in 13 different ratings, suitable for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps.This specific 32A inductive 3 pole IEC contactor is designed for mounting on DIN rail or directly onto a panel. It boasts both Horsepower and Kw motor rating for international acceptance.Rated for various power levels, this contactor can handle up to 7.5HP at 200-208VAC, 10HP at 240VAC, 20HP at 480VAC, and 30HP at 600VAC for three-phase applications. For single-phase use, it can handle up to 2HP at 115VAC and 5HP at 240VAC.When paired with a 480VAC up to 60A circuit breaker, this contactor can achieve a SCCR of up to 85kA. When used with a 600VAC 80A Class J or CC fuse, it can achieve a SCCR of up to 100kA.The contactor comes equipped with a 12 VDC coil and a transient suppressor module. It features one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified, and screw clamp terminals are used for load and auxiliary connections.This compact contactor measures 3.35 inches in height, 1.77 inches in width, and 3.98 inches in depth, weighing 1.18 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, and meets the requirements of RoHS/REACh, making it a Green Premium product.

SIRIUS, central unit 3RK3 basic for modular safety system 3RK3 4/8 f-di,1f-ro,1 f-do,24 V DC parameterizable using software safety es 45 mm width screw terminal up to sil3 (iec 61508) up to performance level e (iso 13849-1)

The CT-APS.12S TIME RELAY OFF-DELAY is a single-function electronic time relay from the CT-S timer range. It provides an OFF-delay (delay on break) function with 10 time ranges from 0.05 s to 300 h. This time relay operates with a rated control supply voltage of 24 - 48 V DC / 24 - 240 V AC and has a 1 c/o (SPDT) output rated at 250 V / 4 A. A control input works with voltage-related (non-floating) triggering. A sealable transparent cover for protection against unauthorized changes is available as an accessory. The device offers screw connection technology with double-chamber cage connection terminals.Key Features:Single-function OFF-delay (delay on break) function10 time ranges from 0.05 s to 300 hRated control supply voltage of 24 - 48 V DC / 24 - 240 V AC1 c/o (SPDT) output rated at 250 V / 4 AVoltage-related (non-floating) triggering control inputSealable transparent cover available as an accessoryScrew connection technology with double-chamber cage connection terminals

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 110A resistive load rating. Contactor is supplied with a 230 VAC 50/60 Hz coil. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.78 inches wide and 4.92 inches deep. It weighs 3.88 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys SK mini-control relay is a versatile solution designed for the control of electromagnetic loads. With its 2 contacts (2NO) and a maximum load capacity of 10A/690V, it provides a robust and reliable performance. The relay operates on a 24V AC control circuit, making it compatible with both AC-15 and DC-13 applications. Its compact design, measuring just 27mm in width, allows for easy installation on a 35mm DIN rail.The TeSys SK mini-control relay is designed to operate at rates up to 20 cycles per minute and withstand ambient temperatures ranging from -20°C to +50°C. This ensures high reliability and durability, making it an ideal choice for various industrial applications.The TeSys SK mini-control relay is certified under multiple standards including IEC, UL, CSA, CCC, and EAC, and is also a Green Premium product, adhering to RoHS/REACh directives. Its screw terminal connection ensures easy and secure wiring.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 65A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 20HP at 200 to 208VAC, 20HP at 240VAC, 40HP at 480VAC and 50HP at 600VAC three phase. Contactor is also rated for 5HP at 115VAC and 10HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 125A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 400 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.90 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.