Schütze & Relais

The SIRIUS Safety Relay Output Extension is designed to expand the output capabilities of your existing safety relay. This module features four relay outputs and relay enabling circuits, providing you with increased flexibility in your automation systems.In addition to the relay outputs, this extension also includes four normally open (NO) contacts and a relay signaling circuit. The relay signaling circuit allows for easy monitoring of the relay's status, while the NO contacts can be used to trigger additional actions or events in your system.This module is compatible with 24 V AC screw connection, ensuring reliable and efficient operation in your automation systems. With its compact design and robust construction, this extension is a valuable addition to any industrial automation setup.

LC1K0901P7 is a compact 3-pole TeSys K contactor from Schneider Electric for motor applications. Rated 9A AC-3 4kW@400V, it includes a 230V 50/60Hz AC coil and 1NC auxiliary contact. LC1K0901P7 is a 3-pole TeSys K contactor from Schneider Electric for simple motor applications rated up to 4kW@400V. Very compact, DIN-rail compatible, with connections by screw clamp terminals, it includes a 230V 50/60Hz AC coil and 1NC built-in auxiliary contact. Available worldwide, it complies with multi-standards (IEC, UL, CSA, CCC, EAC, Marine) and is certified Green Premium (RoHs/Reach). Very compact, 45mm wide, for DIN-rail and panel mounting. Provides a control circuit compatible with 50Hz and 60Hz supplies and 1NC built-in auxiliary contact. Optimized for simple power applications. Can be completed with auxiliary contact blocks (LA1K, LA2K) and thermal relays (LR2K).

TeSys K control relay, 4 contacts (3NO + 1NC), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 24V DC control circuit with no inrush consumption, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -25/+50°C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium product (RoHS/REACh).

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 95A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Contactor is also rated for 7.5HP at 115VAC and 15HP at 240VAC single phase. Contactor is supplied with a 230 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 5.12 inches deep. It weighs 3.55 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

Safety relay and expansion relay with relay outputs 4NO, +24 VDC supply voltage and screw terminals. For monitoring of safety devices, such as emergency stops, directly in the voltage supply circuit of the relay. Also suitable as expansion relay for a safety relay/safety PLC, in order to increase the number of safe outputs.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 38A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 10HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC and 25HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 5HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 80A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 115 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.84 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The DRI424024LTD relay is equipped with two CO contacts featuring a test button made of AgNi. It operates at a rated control voltage of 24 V DC and supports a continuous current of 5 A. The relay is designed with flat blade connections measuring 2.5 mm x 0.5 mm, ensuring secure wire connections. With a mechanical service life rated for up to 10 million switching cycles, this relay provides reliable performance. It incorporates a green LED status indicator and includes a protective circuit with a free-wheeling diode. The rated switching voltage is 250 V AC, with maximum switching voltages of 250 V for both AC and DC applications. For environmental compliance, the relay adheres to standards such as CE, cURus, and EAC, as well as ROHS directives. The insulation coordination indicates a rated voltage of 300 V and a surge voltage category of III, making it suitable for various applications. The relay operates effectively within a temperature range of -40 °C to 55 °C and can handle relative humidity levels from 35% to 85% without condensation. Designation Code: cURus E312083.

The TeSys D contactor is engineered for motor control, accommodating a rated operational current of 65 A at 440 V AC under AC-3 utilization category, making it suitable for various motor applications. This device features a 500V AC coil operating at 50/60 Hz and includes 1NO + 1NC built-in auxiliary contacts, compliant with mirror certification. The connection is facilitated through ring-lug screw terminals for reliability. Designed to perform at rates up to 3600 cycles/hour and functional in environments with temperatures up to 60°C, this contactor ensures high durability and operational efficiency. Its compact dimensions of 55 mm in width allow for DIN-rail mounting or screw fixing. Compliant with multiple standards such as IEC, UL, CSA, CCC, EAC, and Marine, it adheres to Green Premium regulations (RoHS/REACh), ensuring environmental safety.

The TeSys D contactors are designed for seamless integration into control systems, offering versatility across different applications. They come in various ratings, supporting inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This specific 32A IEC contactor can be mounted on DIN rail or directly on a panel. The contactor boasts both Horsepower and Kw motor ratings for international acceptance. It is rated for 7.5HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC, and 30HP at 600VAC three-phase. For single-phase applications, it is rated for 2HP at 115VAC and 5HP at 240VAC. When paired with a 480VAC up to 60A circuit breaker, the contactor can handle SCCR up to 85kA. With a Class J or CC fuse up to 600VAC 80A, it can manage SCCR up to 100kA. The contactor comes with a 220VAC 50/60Hz coil and features one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories ensures compatibility with most applications. The contactor measures 3.35 inches in height, 1.77 inches in width, and 3.62 inches in depth, weighing 0.83 lbs. The TeSys Deca IEC contactor is certified to UL, CSA, IEC, CCC, EAC, and Marine standards. It also meets the RoHS/REACh requirements, making it a Green Premium product.

TeSys D replacement AC coil 230V 50/60Hz for TeSys D contactors. To be used with 3 and 4-pole contactors LC1 D115, D150. It operates in the voltage limits 0.8-1.15 Uc and environments until 55°C Coil with integral suppression device fitted as standard. Green Premium compliant (RoHS/REACh).

Solid State Contactor,SIRIUS SC 1 Pole 20 Amps at 24 VAC to 230 VAC 24 VDC Coil DIN Rail or Panel Mount Screw Terminals 22.5 mm Relay Width 22.5mm Heat Sink Width Zero-Point Switching UL File E143112 in Vol.1 Sec.8

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 25A resistive load rating. Contactor is supplied with a 48 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 65A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 20HP at 200 to 208VAC, 20HP at 240VAC, 40HP at 480VAC and 50HP at 600VAC three phase. Contactor is also rated for 5HP at 115VAC and 10HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 125A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 415 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.90 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys F contactor, 3 poles (3NO), 265A/1000V AC-3, for motor applications up to 132kW@400V. It provides a low sealed consumption 220V 40-400Hz AC coil, bolt terminals for bars or cables with lugs. For high operating rates until 2400 cycles/hour and environments until 55°C, it procures high reliability and durability. It makes installation and maintenance easy thanks to its drawer-mounted coil and a large choice of add-on blocks and accessories (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

The universal plug-in relay operates at a control voltage of 12V DC and is equipped with two changeover contacts, allowing for versatile switching applications with a maximum rating of 10A. The product is designed with cylindrical pins for secure connectivity and provides a lockable test button for enhanced operational safety.With a compact design, this relay reduces enclosure size while improving machine reliability and can be mounted in various positions. The IP40 protection ensures durability against dust ingress, and the transparent cover allows for visual inspection of contact status, complemented by a “Power On” LED that indicates operational readiness in both bright and dim conditions.Designed to support hard-wired logic in automated systems, this relay is compatible with industrial programmable logic controllers (PLCs), making it suitable for demanding applications. It meets several international standards, including UL 508 and IEC 61810-1, ensuring reliability across a wide temperature range of -40 to 55 °C. With a mechanical durability of up to 5,000,000 cycles, this relay is engineered for long-term performance.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 32A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC and 30HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 5HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 80A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 120 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.83 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

One or two-channel contact extension for OSSD signals (e.g., light grid), 3 N/O contacts, 1 N/C contact, up to Cat. 4 PL e in accordance with EN ISO 13849, SIL 3 in accordance with EN 62061, pluggable Push-in terminal block, width: 22.5 mm

The SIRIUS Safety Relay Output Extension 4RO is a robust solution designed for enhanced safety in automation systems. This relay incorporates relay enabling circuits, providing four normally open (NO) contacts and one normally closed (NC) contact. The relay signaling circuit further enhances the functionality of this device, making it an ideal choice for applications requiring precise control over electrical circuits. Key Features: Relay enabling circuits for reliable operation Four normally open (NO) contacts and one normally closed (NC) contact 24V DC spring-type terminal (push-in) for easy connection

The TMP MON REL is a temperature monitoring relay that utilizes a PT100 sensor for accurate temperature measurement. It is designed to measure temperatures ranging from 0 to 100 degrees Celsius, with a control voltage of 120 V AC.This relay is equipped with a spring-loaded terminal and operates on the principle of quiescent current. It features a width of 22.5 mm and offers both Normally Open (NO) and Normally Closed (NC) contacts.Please note that this product has been phased out, and its preferred successor is the 3RS2500-2AW30.

The EMG 17-REL/SG-B 24/21/P relay module integrates a soldered-in remanence miniature switching relay, suitable for a variety of load sizes. It is equipped with positive switching diode wiring and operates on a nominal input voltage of 24 V DC, with a voltage range of 19.2 V DC to 26.4 V DC at 20 °C.This device features one changeover contact made from AgSnO and supports a maximum switching voltage of 250 V AC/DC. The module is designed for versatile applications, boasting a mechanical service life of approximately 10 million cycles and operates reliably across a temperature range of -40 °C to 50 °C.With an input current of approximately 8 mA at nominal voltage, it provides a typical response time of 5 ms and a release time of the same duration. The relay supports a limiting continuous current of 5 A and a maximum inrush current of 6 A. Installation is facilitated through screw connections, accommodating conductor cross-sections from 0.2 mm² to 4 mm² for rigid conductors and up to 2.5 mm² for flexible conductors.The module is compliant with DIN EN 50178 standards and is designed for DIN rail mounting, allowing for flexible positioning. Its reinforced insulation and EMC class A compliance ensure safe operation in diverse environments.