Schütze & Relais

The contactor features a 3-pole configuration (3NO) and is rated for 185A at 690V under AC-3 utilization category, making it ideal for motor applications reaching up to 90kW at 400V. It operates with a low sealed consumption coil of 48V AC, suitable for frequencies between 40-400Hz. The design incorporates bolt terminals that accommodate both bars and cables equipped with lugs. With a maximum operating rate of 2400 cycles per hour and capable of functioning in environments up to 55°C, this contactor ensures high reliability and durability. Maintenance and installation are facilitated by a drawer-mounted coil and various add-on blocks and accessories, which must be ordered separately. The device is certified to multiple standards, including IEC, UL, and CSA, and complies with Green Premium standards including RoHS and REACh.

The RS 30 230VAC LD LP 1A is a relay module characterized by its single normally open contact, constructed from AgNi 0.15 material with a gold flash. It operates at a rated control voltage of 230 V AC, accommodating a tolerance of +5% to -15%. The continuous current capacity reaches 3 A, allowing for effective switching operations.Designed for easy installation, this module utilizes a screw connection method with a clamping range between 0.5 mm² and 4 mm². The relay's dimensions are compact, measuring 11.2 mm in width, 70 mm in height, and 56 mm in depth, with a net weight of 31 g. The red LED status indicator enhances operational visibility.With an electrical service life exceeding 700,000 cycles for the AC coil and over 500,000 cycles for the DC coil, the RS 30 ensures reliability in demanding applications. The relay can switch voltages up to 250 V AC, handling resistive loads of up to 2000 VA.This product adheres to multiple standards, including CE and EAC certifications, and is compliant with ROHS regulations. It is designed to operate in environments with temperatures ranging from -25 °C to 40 °C and relative humidity levels of up to 93% without condensation.

The DRM570730LT relay is designed with four changeover contacts (CO) that include a test button, facilitating reliability in circuit control. It operates at a rated control voltage of 230 V AC and can handle a continuous current of 5 A, making it suitable for various industrial applications. In terms of construction, the relay has a transparent color and features a test button that is lockable, alongside a mechanical switch position indicator. It adheres to UL 94 V-2 flammability standards and has been approved for use under CE, cURus, and EAC certifications, ensuring compliance with international safety standards. With dimensions of 21 mm in width, 27.4 mm in height, and 35.7 mm in depth, this relay is compact, weighing 33.33 g. The plug-in connection method simplifies installation and maintenance. The electrical characteristics include a contact resistance of ≤ 50 mΩ and a mechanical service life of up to 20 million switching cycles. The input specifications reveal a pull-in voltage of 184 V AC and a drop-out voltage of 69 V AC, with a coil resistance of 15,000 Ω ± 10%. The status indicator is a red LED, providing immediate visual feedback. Notably, the relay can switch up to 250 V AC and handle inrush currents of 10 A for brief durations. Its switching capacity includes a maximum of 1250 VA for AC and 120 W at 24 V for DC applications. The relay operates effectively across a wide temperature range of -40 °C to +55 °C and maintains functionality in relative humidity levels from 35% to 85% without condensation. This relay complies with standards such as IEC 61810-1 and UL 508, as indicated by its certificate number E312083, ensuring it meets rigorous industrial requirements.

The miniature plug-in relay is designed for various automation applications, including industrial machinery and HVAC systems. It operates at 24V AC and supports a continuous output current of 5A, with a maximum switching capacity of 1500 VA. The relay features a lockable test button and is mounted on a separate terminal socket for easy connection.Weighing 0.105 kg and measuring 82.8 mm in height, this relay is suitable for use in environments with an ambient temperature range of -40 to 55 °C. It offers substantial dielectric strength ratings, including 1300 V AC between contacts and 2000 V AC between coil and contact, ensuring reliable operation even in demanding conditions.This product complies with multiple international standards and certifications, including UL, IEC, and RoHS, highlighting its adherence to quality and safety requirements. The relay’s contacts are made from AgNi, providing durability and reliability in performance. The device is packaged in lots of 30, catering to bulk purchasing needs.

The RXM miniature relay is a component of the Harmony Electromechanical Relays series designed for various industrial applications. This relay is equipped with a 2 C/O configuration, capable of handling a current rating of 12A and operating at a control voltage of 120V AC at 50/60 Hz. A notable feature is the integrated lockable test button, which allows for momentary activation by pressing the red pushbutton, with a green part that locks the test function in place. Additionally, a mechanical indicator adjacent to the test button utilizes an orange flag to display the contact status, complemented by a green LED that signals when the relay is energized, ensuring visibility in both daylight and low-light conditions.Optimized for use in industrial machinery, packaging, textiles, HVAC systems, automation control panels, low/medium voltage switchgear, motor control, and PLC interfaces, the RXM relay is compatible with RXZE sockets and can be further secured with optional vibration protection measures. It adheres to several international standards and certifications including IEC, CE, UL, and RoHS, emphasizing its reliability and safety. The relay is designed for operational versatility and can function effectively within an ambient temperature range of -40°C to 55°C.

SIRIUS, central unit 3RK3 basic for modular safety system 3RK3 4/8 f-di,1f-ro,1 f-do,24 V DC parameterizable using software safety es 45 mm overall width spring-type terminal up to sil3 (iec 61508) up to performance level e (iso 13849-1)

The Schneider Electric TeSys Deca IEC Contactor is a robust solution for motor control applications, offering reliable performance for currents up to 25A and power ratings up to 15HP at 480VAC. This non-reversing contactor features a 24VDC coil and is designed for three-phase systems with three normally open (3 NO) contacts. Its open style design ensures easy integration into various control panels.Engineered for high reliability, the TeSys Deca contactor supports operating rates up to 3600 cycles per hour and can withstand environments with temperatures up to 60°C. The compact 45mm width allows for efficient use of space, and it can be mounted on DIN rails or fixed with screws. The contactor is equipped with screw clamp terminals for secure connections.Compliant with multiple international standards including IEC, UL, CSA, CCC, EAC, and Marine, this contactor ensures global compatibility and adherence to stringent safety and performance criteria. It also features improved fire resistance, certified under IEC 60335-1 (Clause 30.2) and IEC/EN/UL 60335-2-40 (Annex JJ) for anti-flammable refrigerants.Ideal for various industrial applications, the TeSys Deca contactor is suitable for motor control, resistive loads, and more, making it a versatile choice for engineers and integrators seeking a reliable and efficient solution.

The Sirius S6 AC Contactor is designed for high current applications, offering a rating of 275A and 110-127V AC/DC. This contactor is ideal for use in industrial environments where reliability and durability are paramount. Key Features: 3-pole design for enhanced performance and versatility S6 frame size for easy installation and maintenance Varistor protection to safeguard against voltage surges 2 NO (Normally Open) and 2 NC (Normally Closed) auxiliary contacts for added functionality Connection rail/screw terminal for easy wiring Specifications: Rated current: 275A Voltage: 110-127V AC/DC Frame size: S6 Number of poles: 3 UL File E31519 in Vol.11 Sec. 5

Input solid-state relay, with DC voltage output push-pull, transmission frequency: 100 kHz, with light indicator and protective circuit in input and output circuits, input: 5 V DC, output: 14 - 30 V DC/50 mA

The Phoenix Contact 2966236 (QUINT-PS/1AC/24DC/5) is a robust and efficient DIN rail power supply that delivers 24 V DC output at 5 A. As part of the QUINT series, it offers advanced features such as Power Boost, preventive function monitoring, and a wide input voltage range. Designed for demanding industrial environments, this power supply ensures maximum system availability and long-term reliability. Ideal for powering PLCs, sensors, HMIs, and other control components in industrial automation.

The contactor features a four-pole design with two normally open (NO) and two normally closed (NC) contacts, optimized for non-inductive loads. It operates effectively at a rated operational voltage of up to 690V AC-1, supporting applications requiring up to 20A.Equipped with a 42V AC coil operating at 50/60Hz, this device does not include built-in auxiliary contacts and connects via screw clamp terminals. It is designed for high reliability, capable of operating at rates up to 600 cycles per hour and in ambient temperatures reaching up to 50°C.Its compact width of 45mm allows for easy installation on DIN rails or via screw fixation. The contactor meets multiple standards including IEC, UL, CSA, and others, confirming its wide applicability across various sectors.Additional features include a high mechanical durability rated at 10 million cycles and an electrical durability of 0.16 million cycles at 20A AC-1, ensuring long-term operational stability. The unit is also compliant with environmental regulations, including RoHS and REACh, confirming its suitability for sustainable applications.

The TeSys Deca control relay is an advanced electromechanical component designed for the control of electromagnetic loads. It features 5 contacts: three normally open (NO) and two normally closed (NC), with a rating of 10A at 690V, making it suitable for a wide range of applications. This relay provides a 24V DC control circuit with no inrush consumption and is equipped with a surge suppression device, ensuring reliable operation even under adverse conditions. The connection terminals are designed for easy installation, allowing for high operating rates up to 180 cycles per minute and an ambient temperature range of -40°C to +60°C. This compact relay measures only 45mm in width and can be easily clipped onto a 35mm DIN rail or fixed using screws, making it suitable for various installation scenarios. The TeSys Deca control relay is certified under multiple standards, including IEC, UL, CSA, CCC, EAC, and Marine, and is also recognized as a Green Premium product, complying with RoHS/REACh regulations.

The TeSys D series contactors are designed to seamlessly integrate into control systems, offering versatility for a wide range of applications. These contactors come in 13 ratings, accommodating inductive motor loads up to 150 full-load amps and resistive loads up to 200 amps. This particular model is a 50A inductive 3 pole IEC contactor, suitable for mounting on DIN rail or directly on a panel.The TeSys D contactors boast both horsepower and Kw motor ratings for international acceptance. They are rated for 15HP at 200 to 208VAC, 15HP at 240VAC, 40HP at 480VAC, and 40HP at 600VAC three-phase. For single-phase applications, they are rated for 3HP at 115VAC and 7.5HP at 240VAC.This contactor can handle up to a 100kA SCCR when used with a 480VAC up to 110A circuit breaker or an up to 600VAC 110A Class J or CC fuse. It comes equipped with a 230VAC 50/60Hz coil and includes one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified, and screw clamp terminals are used for load and auxiliary connections.The TeSys D contactor measures 4.80 inches in height, 2.17 inches in width, and 4.72 inches in depth, weighing 1.87 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, as well as meeting the requirements of RoHS/REACh, making it a Green Premium product.

LR3D35 is a TeSys LRD thermal overload relay from Schneider Electric to be used with a TeSys D contactor. It protects motors 15-18.5kW@400V thanks to a thermal range 30-38A , a tripping class 10A, for use with unbalanced loads. LR3D35 is a TeSys LRD thermal overload relay from Schneider Electric for direct mounting on TeSys D contactors. With a thermal setting range 30-38A and tripping class 10A, it protects unbalanced loads and motors 15-18.5kW@400V. It provides manual test & reset buttons, automatic reset, trip auxiliary contact and flag indicator. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Thermal overload protection relay, bimetallic type, for use with unbalanced loads (non differential). Direct mounting on the bottom terminals of a Tesys contactor LC1D32 and D38 to form a compact starter. Light and compact, 45mm wide. Temperature compensated for a good accuracy of the protection. Manual control with test & reset buttons, manual / automatic reset selector. Trip signaling with 1NO+1NC auxiliary contacts and trip flag indicator. Can be completed with terminal blocks for separate mounting (LAD7B, LAD96) and remote control devices (LAD703, LA7D03).

LC1K0910B7 is a compact 3-pole TeSys K contactor from Schneider Electric for motor applications. Rated 9A AC-3 4kW@400V, it includes a 24V 50/60Hz AC coil and 1NO auxiliary contact. LC1K0910B7 is a 3-pole TeSys K contactor from Schneider Electric for simple motor applications rated up to 4kW@400V. Very compact, DIN-rail compatible, with connections by screw clamp terminals, it includes a 24V 50/60Hz AC coil and 1NO built-in auxiliary contact. Available worldwide, it complies with multi-standards (IEC, UL, CSA, CCC, EAC, Marine) and is certified Green Premium (RoHs/Reach). Very compact, 45mm wide, for DIN-rail and panel mounting. Provides a control circuit compatible with 50Hz and 60Hz supplies and 1NO built-in auxiliary contact. Optimized for simple power applications. Can be completed with auxiliary contact blocks (LA1K, LA2K) and thermal relays (LR2K).

This interface relay is designed with a coil control voltage of 12V DC and incorporates two changeover contacts (DPDT), which support a maximum load of 5A. Its compact design allows for efficient use of space while facilitating high-rated current applications.The relay is equipped with a lockable test button, enhancing its usability in various operational environments. Faston pin terminals ensure quick and secure connections, contributing to reliable system performance.With a robust operational capability, the relay withstands ambient temperatures ranging from -40°C to 70°C and exhibits an impressive mechanical durability of up to 10 million cycles. Additionally, it supports a switching capacity of 1250 VA and operates effectively within Pollution Degree 2 environments.This product meets a variety of certifications including CSA, CE, EAC, UL, and is compliant with standards such as IEC 61810-1 and UL 508. Its construction from silver alloy (AgSnO2In2O3) further enhances reliability in operational settings.

The TeSys F contactor features four poles (4NO) and is rated for a maximum of 250A at 690V AC-1, suitable for non-inductive loads. Its design allows for the selection and installation of a coil separately, ensuring flexibility during setup. The device is equipped with bolt terminals to accommodate bars or cables with lugs, enhancing its installation versatility.Engineered for high operational rates of up to 2400 cycles per hour and capable of functioning in ambient temperatures ranging from -40°C to 60°C, this contactor ensures reliability and durability in various environments. It also features a drawer system for easy coil insertion and access to a wide range of add-on blocks and accessories, which must be ordered separately.The unit complies with multiple standards, including IEC, UL, CSA, and more, and meets Green Premium compliance for environmental sustainability, adhering to RoHS and REACh regulations. The mechanical robustness is noteworthy, withstanding vibrations and shocks under specified conditions, making it suitable for demanding applications.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 60A resistive load rating. Contactor is supplied with a 230 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.76 inches wide and 4.72 inches deep. It weighs 2.40 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The D-SERIES DRL relay is equipped with two CO contacts made of AgCdO, suitable for controlling circuits with a rated voltage of 24 V DC. This relay supports a continuous current of 10 A and utilizes flat blade connections measuring 4.8 mm x 0.5 mm.With a compact design, the relay's dimensions are 21.5 mm in width, 28 mm in height, and 36 mm in depth, amounting to a net weight of 35 g. Its operational reliability is enhanced by a mechanical service life of up to 10 million switching cycles and a contact resistance of ≤ 50 mΩ.For environmental compliance, it adheres to standards such as CE, cURus, and EAC, and is compliant with ROHS regulations. The relay exhibits a UL 94 flammability rating of V-2 and is designed to operate efficiently within a temperature range of -25 °C to 55 °C, with a relative humidity tolerance of 35% to 85%.Electrical characteristics include a rated switching voltage of 250 V AC, with a maximum AC switching voltage also at 250 V, and an inrush current capacity of 50 A for 50 ms. The relay's switching capacity reaches 2500 VA for AC and 240 W at 24 V for DC applications. The pull-in and drop-out voltages are specified at 18 V and 2.4 V DC, respectively, ensuring effective operation across varying conditions.Insulation coordination is robust, featuring a rated voltage of 250 V and a surge voltage category of III, with IP20 protection. The dielectric strength between input and output is rated at 2 kVeff for one minute, ensuring reliable performance in industrial applications. This relay complies with IEC 61810-1 and other relevant standards, indicating its suitability for various control system applications.

The CR-U012DC2 pluggable interface relay is part of the universal relay series. It operates with a rated control supply voltage of 12 V DC and is equipped with two changeover (c/o) contacts, which are rated for a maximum of 250 V AC and 10 A. An integrated blue test button allows for manual actuation and locking of the output contacts, enhancing usability.This relay adheres to several standards including IEC/EN 61810-1 and UL 508, ensuring compliance with industry requirements. It has a degree of protection rated at IP40, making it suitable for various applications. The relay's operational temperature range is from -40 °C to +70 °C, allowing for reliable performance in extreme conditions.Dimensions for this unit are 35 mm (W) x 54.4 mm (H) x 35 mm (D), with a net weight of 0.083 kg. Additional accessories such as standard sockets and pluggable function modules are available, facilitating flexible installation options.