Ventilblöcke & Verteiler

This sub-base is part of the Modicon ABE7 series, specifically designed for the Telefast pre-wired system. It accommodates 16 channels, each equipped with a switch disconnector, facilitating efficient control signal management for PLC systems. The output sub-base operates within a supply voltage range of 19V to 30V and includes screw clamp terminals ensuring secure electrical connections. With a compact design, the dimensions are 211 mm in width, 74 mm in depth, and a height of 89 mm. This unit has a net weight of 0.67 kg and is rated at IP2X, providing a degree of protection suitable for various industrial applications. Installation is straightforward, utilizing clips for a 35mm symmetrical DIN rail or screws for solid plate mounting. This product’s exceptional shock and vibration resistance, rated at 15 gn and 2 gn respectively, makes it suitable for demanding environments. The Modicon ABE7 designation signifies a streamlined approach to wiring in automation systems, enhancing operational simplicity. Certified by multiple international standards including GL, CSA, and UL, this sub-base meets rigorous requirements for environmental and operational safety. It is also compliant with various sustainability regulations, ensuring minimal environmental impact.

The power distribution block is designed for terminating wires in compliance with NEMA standards. It comprises a two-pole configuration with one lug opening on the line (main) side and another on the load (branch) side.The line side lug accommodates either one or two #14 to 2/0 copper or aluminum wires, while the load side lug supports one #14 to 2/0 copper or aluminum wire. Both lugs are constructed from aluminum and are rated for a maximum current of 175 amperes for copper connections and 135 amperes for aluminum. Additionally, these lugs can handle operational voltages up to 600 volts.Constructed with a general-purpose phenolic housing, this distribution block is UL component recognized and CSA certified, ensuring compliance with safety standards. The unit operates effectively within an ambient temperature range of -40 to 302 °F and can be surface mounted. It is crucial to note that the product is compliant with various sustainability regulations, including RoHS and REACH, and is free of hazardous substances above specified thresholds. The product's rated service breaking capacity is 65 kA as per UL 508 A standards, making it suitable for various industrial applications. Compatibility is maintained with the 9080LB22 series.

The UL1953 Power Distribution Block is designed to facilitate safe cable splicing, enabling the distribution of primary power into secondary circuits while adhering to stringent electrical codes. This block is compliant with UL508A and the National Electrical Code®, ensuring reliable performance in feeder and branch circuit applications. This model supports a maximum operating temperature of 80 °C and is rated for both AC and DC voltages up to 1000 V. The short circuit ratings vary across classes, with up to 400 kA for Class J, ensuring robust protection in demanding environments. Constructed from glass-filled polycarbonate, the insulators are designed for durability. The optional polycarbonate safety covers enhance safety by providing dead-front protection and include test probe holes for circuit verification. The product line includes features such as optional adder poles for increased versatility, allowing users to customize primary and secondary wire configurations without tools. With a primary and secondary wire range of 500-#4 and standard tin-plated aluminum connectors, this distribution block is engineered for ease of installation and compatibility with both aluminum and copper wiring. The direct screw mounting installation method simplifies setup, making it suitable for various applications in electrical distribution systems.

The accessory is designed for use with PowerPact H circuit breakers, allowing for the connection of secondary disconnecting blocks that can accommodate up to nine wires each. It features a moving part linked to the circuit breaker via a support, as well as a fixed part mounted on the plug-in base, which includes connectors suitable for wire sizes up to 14 AWG (2.5 mm²).With a capacity to support various load wire connections, this product serves as an efficient alternative to standard distribution blocks, optimizing space and installation time. The field-installable kit contains a tin-plated aluminum lug, connectors, and all necessary mounting hardware, ensuring compatibility with UL 508 Industrial Control applications and UL 1995/CSA C22.2 No. 236 for heating and cooling equipment.Notably, it is designed for circuit breakers rated from 15A to 100A, maintaining compliance with environmental regulations, such as being mercury-free and PVC-free. The product is built to meet stringent standards, making it a reliable choice for heavy-duty commercial and industrial applications.

One-touch fitting manifold series KM has 6 different model options available. Male thread and female thread options available on certain models. Tube material includes nylon, soft nylon and polyurethane.

SIMATIC s7-1500. CPU 1511-1 PN. Zentrale Verarbeitungseinheit mit Arbeitsspeicher 150 KB für Programm und 1 MB für Daten. 1. Schnittstelle PROFINET IRT mit 2-Port-Switch. 60 ns Bit-Leistung. SIMATIC Speicherkarte erforderlich

The 4 Series Stack Type Pilot Check Valve (MPD-04W-20-10) from Daikin is designed for precise and reliable fluid control in various industrial applications. This valve features a modularized control section and a stacked structure, ensuring ease of installation and maintenance. With a maximum operating pressure of 35 MPa and a maximum flow rate of 300 L/min, it is suitable for high-demand systems. The valve is equipped with control ports A and B, and a plumbing thread nominal of 1/2B (15A), making it versatile for different setups. The cracking pressure of 0.2 MPa ensures efficient operation under varying conditions. Ideal for use in hydraulic systems, this valve enhances system performance and reliability.

This connection sub-base, designated as ABE7, is engineered for distributing power to four thermocouples. It effectively manages isolated sensor power supplies using a converter while providing cold-junction compensation for the thermocouple inputs. The product is equipped with screw-type terminals, allowing for connections with a 25-way SUB-D interface to Programmable Logic Controllers (PLC).Rated IP20, it is suitable for a variety of industrial applications and operates within an ambient temperature range of 0 to 60 °C. The device weighs 0.18 kg and can be mounted using clips on a 35 mm symmetrical DIN rail or via screws with a solid plate fixing kit. It is compatible with Modicon M340 BMXART0414 and BMXART0814 analog input modules.This sub-base meets several certification standards, including GL, CSA, UL, and DNV, ensuring its reliability in various environments. Its design allows for efficient wiring rationalization in automation systems.

This passive connection sub-base, part of the Modicon ABE7 range, accommodates 16 digital output channels, each with two terminals. Operating at a control circuit voltage of 24VDC, it facilitates digital output control functions effectively.The sub-base is equipped with screw terminals for reliable electrical connections and features a 20-way HE10 interface for seamless integration with programmable logic controllers. With a tightening torque requirement of 0.6 N·m using a flat 3.5 mm screwdriver, its installation is straightforward. The device has an IP20 degree of protection and weighs 0.640 kg, making it suitable for various industrial applications where rapid I/O module connection is necessary.Designed for compatibility with Modicon M221 Book, TSX Micro, and Modicon Premium controllers, as well as Modicon TM3 and X80 I/O expansion modules, this sub-base simplifies wiring in automation systems. It includes multiple safety features, such as short-circuit protection with an internal fuse rated at 2 A and a maximum output current of 1.8 A. Furthermore, it is certified by DNV, CSA, UL, GL, and EAC, ensuring compliance with industry standards. The Designation Code for this model is ABE7H16F43.

This passive connection sub-base is a component within the Modicon ABE7 range, specifically engineered for pre-wired system applications. It supports 16 channels, providing one terminal per channel for digital I/O functionality. The operating control circuit voltage is 24 VDC, facilitating efficient communication with connected devices.Electrical connections are established via screw terminals, and the device features a 20-way HE10 connector for interfacing with programmable logic controllers (PLCs). The tightening torque for wiring is specified at 0.6 N·m, utilizing a flat screwdriver with a diameter of 3.5 mm. The sub-base adheres to the IP20 protection class, ensuring moderate environmental resistance, and has a net weight of 0.196 kg.This product is suitable for various industrial applications that require rapid connections between I/O modules—whether digital or analog—and operational components. The sub-base is certified by DNV, CSA, UL, GL, and EAC, underscoring its compliance with industry standards. It is compatible with TSX Micro and Premium PLCs, as well as numerical controllers, and can be mounted using clips on a 35 mm symmetrical DIN rail or secured with screws through a solid plate.In terms of environmental resilience, the sub-base operates within a temperature range of -5 to 60 °C and is designed to withstand a shock resistance of up to 15 g, as per IEC 60068-2-27 standards. Its construction allows for a pollution degree rating of 2, conforming to IEC 60664-1, making it a versatile choice for various automation system setups.

The subject of our discussion today is the PacDrive 3 range's offering in distribution boxes, specifically tailored for Lexium 62 ILM daisy chains. This particular distribution block boasts a unique configuration: 1 input and 4 outputs. It is equipped with a SERCOS III physical interface, operating at a transmission rate of 100Mbit/s.The rated supply voltage for this product spans from 250V to 700V, while the control circuit voltage stands at 24V DC and can handle an input current of up to 20A. This distribution box is not only robust but also weather-resistant, boasting an IP65 rating. Constructed from polycarbonate, it measures 230mm in width, 151.4mm in depth, and 94mm in height, weighing a mere 0.85kg.This distribution box is compatible with Lexium 62 ILM integrated servo modules, which can be controlled using all PacDrive LMC Eco and Pro/Pro 2 series motion controllers via SERCOS communication. It also supports multiaxis integrated servo drives ranging from 0.31kW to 1.91kW, making it an ideal choice for automation solutions based on PacDrive 3.

The auxiliary contact block is compatible with contactors LC1D and control relays CAD, providing 2 normally open (NO) and 2 normally closed (NC) contacts. Rated for operational currents up to 10A at 690V AC, it utilizes spring terminals for connection. The device features a compact design with dimensions of 44 mm in width, 42 mm in depth, and 48 mm in height, and has a net weight of 0.05 kg. Its mechanical durability is rated for 30 million cycles, ensuring reliable performance over time.With an operating temperature range from -5 to 60 °C and a storage temperature range of -60 to 80 °C, this block is suitable for various environments, offering an IP20 protection rating as per IEC 60529. Its certifications include compliance with multiple international standards such as IEC, UL, CSA, and others, affirming its reliability and safety standards.This product is classified under the Green Premium category, indicating its compliance with environmental regulations such as RoHS and REACH, and it is designed to be mercury-free and free of toxic heavy metals. The auxiliary contact block, with the designation code LADN, supports instantaneous contact operation with a non-overlap time of 1.5 ms between NC and NO contacts during energization and de-energization.

The VQC1000/2000 Manifold Block Assembly is designed for the VQC1000/2000 series, offering exceptional flexibility and space-saving benefits. This assembly is IP67 compliant, ensuring dust-tight and immersion-proof performance based on IEC60529 standards. It features a multi-pin connector manifold that allows for easy adaptation, including added stations and changed specifications.The assembly's design positions all solenoids and fittings on one side, enabling free mounting and reducing recombination labor with its no-screws, one-clamp structure. It supports various common wiring methods and includes a 4-position, dual 3-port valve. The manifold type numbers are VV5QC11 and VV5QC21.Additionally, the VQC1000/2000 Manifold Block Assembly is compatible with the EX600 serial transmission system, supporting multiple Fieldbus protocols such as DeviceNet®, PROFIBUS DP, CC-Link, EtherNet/IP™, EtherCAT, and PROFINET. It can connect up to 9 units in any order, including input devices like auto switches and output devices like solenoid valves. The assembly also features a self-diagnosis function for maintenance monitoring and parameter setting via a Handheld Terminal.This product is ideal for applications requiring reliable and efficient manifold solutions with advanced connectivity and diagnostic capabilities.

The SINAMICS G130 Power Module IP00 is a robust and reliable solution for industrial applications, designed to handle high power demands with ease. This 3-phase module operates at 380-480 VAC with a frequency of 50/60 Hz, delivering an impressive unit rating of 840 A. It's equipped with a 6-pulse supply without power recovery design, ensuring efficient and reliable performance. The CIM is included, along with a Drive-CLiQ cable without a control module for seamless integration into your system.This power module is not just about high power output, but also about precision and control. It's designed to deliver 450 kW of power, making it an ideal choice for applications that require both high performance and reliability. The IP00 rating ensures that the module can operate in a variety of environments, from industrial settings to harsh outdoor conditions.The SINAMICS G130 Power Module IP00 is more than just a power source; it's a comprehensive solution for your industrial needs. It combines high power output with advanced design features, ensuring that you get the best performance and reliability from your system. Whether you're looking to power heavy machinery or drive complex processes, this module has got you covered.

The ET 200SP BU20-P12+A0+0B TX rail is designed for rigorous applications, supporting ambient temperatures from -40 °C to +70 °C, with a short-term tolerance of +85 °C for 10 minutes, adhering to the specifications of 6ES7193-6BP00-0BD0. It includes a conformal coating, ensuring durability in challenging environments.This unit features a single slot configuration and utilizes push-in terminals, devoid of auxiliary terminals, with a width of 20 mm and height of 117 mm. The rail is suitable for mounting on various structures and is certified for railway applications under multiple standards such as EN 50155 and EN 50121-4, addressing temperature, vibration, and EMC requirements.With a rated supply voltage of 400 V AC and a maximum current carrying capacity of 5 A at up to 60 °C, this rail demonstrates compliance with international safety and environmental standards, including protection against dust and gas as per ATEX classification. The unit has also been tested for resilience against mechanical and chemically active substances, making it appropriate for both stationary and mobile applications in industrial and rail sectors.

The SMC VQC1000/2000 Manifold Block Assembly is designed for high-performance and flexibility in industrial automation systems. This assembly is IP67 compliant, ensuring dust-tight and immersion-proof protection. It features a multi-pin connector manifold that allows for easy adaptation, such as adding stations or changing specifications. The space-saving design positions all solenoids and fittings on one side, facilitating free mounting and reducing recombination labor with a one-clamp structure.The manifold block assembly supports a variety of common wiring methods and includes a 4-position, dual 3-port valve. It is compatible with serial transmission systems like EX600, supporting various Fieldbus protocols including DeviceNet®, PROFIBUS DP, CC-Link, EtherNet/IP™, EtherCAT, and PROFINET. Additionally, it offers power-saving options, reducing power consumption by up to 60% compared to current models.This manifold assembly also features a self-diagnosis function, enabling maintenance period ascertainment and parts identification that require maintenance. The EX260 series supports safety communication (PROFIsafe), making it suitable for ISO 13849-compliant safety circuit constructions. The assembly can connect input devices such as auto switches, pressure switches, and flow switches, as well as output devices like solenoid valves, relays, and indicator lights in any order.Applications include integration into complex pneumatic and electrical systems where reliability, flexibility, and compliance with safety standards are paramount.

The U-Side End Plate Assembly is a crucial component of the series VQC1000/2000 valve manifold. This assembly offers multiple options for exhaust and port size, ensuring versatility in various applications.

Series SY offers major advances in valve performance for cost-effective solutions to your requirements. The series offers high flow with low power consumption in a compact design. The SY is available in body ported or base mounted styles and can be used individually or manifold mounted.

The SMC VVQC1000-T0-1 Connector Block Assembly is designed to enhance the efficiency and reliability of your automation systems. This high-quality connector block assembly ensures seamless integration and optimal performance in various industrial applications. Engineered with precision, it offers robust connectivity and easy installation, making it an ideal choice for engineers and integrators looking to streamline their automation processes.Featuring a compact design, the SMC VVQC1000-T0-1 minimizes space requirements while providing maximum functionality. Its durable construction guarantees long-lasting performance, even in demanding environments. The connector block assembly is compliant with industry standards, ensuring compatibility and safety in your operations.Whether you are upgrading existing systems or implementing new automation solutions, the SMC VVQC1000-T0-1 Connector Block Assembly delivers exceptional value and performance. Trust in SMC's expertise and innovation to keep your operations running smoothly and efficiently.

The TeSys island bus coupler operates as a critical interface between a group of starters and an automation controller over EtherNet/IP or Modbus TCP. This device is designed to manage the complete configuration of the TeSys island, which can include up to 20 modules. It is powered externally by 24V DC and features two RJ45 ports for EtherNet/IP or Modbus TCP communication, along with one RJ45 service port and a micro SD card port to facilitate diagnostics and maintenance through an embedded web server (OMT).With an operating ambient temperature range of -10 to 60 °C and a storage temperature range of -25 to 70 °C, the bus coupler is built to withstand various environmental conditions. It is mounted on a 35 mm symmetrical rail, occupying the leftmost position in the TeSys island configuration. The device is certified under multiple standards, including IEC, UL, CSA, CCC, and EAC, and meets cybersecurity requirements with Achilles Level 2 certification. Additionally, it aligns with Green Premium compliance, ensuring it is free of hazardous substances.