Bosch Rexroth Ersatzteile für industrielle Automatisierung

Section profile VFplus 90 AL, L50-6000 - The section profile is the supporting element when building straight conveyor sections and is used for mounting all necessary components. - Size: 65, 90, 120 - Slot on the inside for attaching main components such as drive/return unit, curves, etc. - Slot on the outside for fastening lateral guides, supports, or other accessories - If necessary, the slide rail can be attached laterally using the centering groove as a drilling aid - Special constructions can be attached quickly and simply using components from the modular aluminum framing system and the external 10 mm slot.

Rubber profile L30-30000 - To avoid hard abutting edges, for instance when setting down impact-sensitive products - For use as footrest to clip onto the cross strut of the workstation from the top and front - Very simple and inexpensive - Suitable for the construction of ESD workstations

EcoFlow roller – plastic, EL = 105...1005 - Based on EcoFlow section profile - For manual slide sections with rollers - Clip-in guide profiles with lateral guide and clip-in conveyor rollers

Support profile VFplus STS, L75-3000

EcoFlow roller – stainless steel, EL = 105...1005 - Based on EcoFlow section profile - For manual slide sections with rollers - Clip-in guide profiles with lateral guide and clip-in conveyor rollers

Stop gates EL = 105...1005 - Stop gate for positioning workpiece pallets or containers - Remember to leave sufficient leg room already at the planning stage. Stop gates extend downwards by an additional 45 mm - We recommend using a workpiece pallet with corner pieces to provide a defined stopping mechanism

The section is used for self-assembly of conveyor units in conjunction with the drive module AS 2/B-... and the return unit UM 2/B - For conveyor unit self-assembly - Easy insertion of the guide profile into the section profile - Easily replaceable if worn out - Conveyor medium: Belt (suitable for use in an EPA) - Can be combined with workpiece pallet WT 2/LS - Can be combined with scraper

Return stops EL = 105...1005 - Return stop for positioning workpiece pallets or containers - Remember to leave sufficient leg room already at the planning stage. Return stops extend downwards by an additional 45 mm - We recommend using a workpiece pallet with corner pieces to provide a defined stopping mechanism

Mounting kit for PE 5 and PE 5/T - Fastening the PE 5 and PE 5/T positioning unit in the ST 5/H conveyor unit - Centering lugs for pre-positioning and fast assembly - Mounting location: on the section profile

SZ 2/T-H Leg Set - Leg set for heavy-duty double-track conveyor sections on one conveying level. - Installation location AO = 55 x 45: SP 2/B-50 - Installation location AO = 80 x 45: ST 2/B; SP 2/BH; BS 2; BS 2/M - Installation location AO = 100 x 45: ST 2/B-100; ST 2/C-100; ST 2/R-100; ST 2/R-V; BS 2/C; BS 2/R; BS 2/R-V; CS/C - Installation location AO = 100 x 50: ST 2/C-H; ST 2/R-H; BS 2/C-H; BS 2/R-H

SZ 2/T Leg Set - Leg set for double-track conveyor sections on one conveying level. - Installation location AO = 55 x 45: SP 2/B-50 - Installation location AO = 80 x 45: ST 2/B; SP 2/BH; BS 2; BS 2/M - Installation location AO = 100 x 45: ST 2/B-100; ST 2/C-100; ST 2/R-100; ST 2/R-V; BS 2/C; BS 2/R; BS 2/R-V; CS/C - Installation location AO = 100 x 50: ST 2/C-H; ST 2/R-H; BS 2/C-H; BS 2/R-H

SZ 2/U Leg Set - Leg set for single-track conveyor sections on two conveying levels.

Section profile VFplus 90 STS Clean, L75-3024 - Elongated holes for attaching a drive/return unit, curves, lateral guides, supports and other accessories - Simple to clean

SZ 2/U-H Leg Set - Leg set for heavy-duty single-track conveyor sections on two conveying levels.

Leg set SZ 1/L - Extruded aluminum profile - Height-adjustable bases - Suitable for conveyor sections and belt sections

Leg set SZ 1 - Extruded aluminum profile - Height-adjustable bases - Suitable for conveyor sections and belt sections

Function-integrated profile 40x120x120 -/- - Construction profiles with usable interior space for guiding cables and hoses - 2 parts (profile and cover) - Cover with hinge function on both sides - Concealed 10 mm groove for mounting socket strips or installation elements - Screw holes for mounting cover plates - Closed exterior - Mount for dividing strips and grounding cables - Mount for potential equalizer

Function-integrated profile 60x120 -/- - Construction profiles with usable interior space for guiding cables and hoses - 2 parts (profile and cover) - Cover with hinge function on both sides - Concealed 10 mm groove for mounting socket strips or installation elements - Screw holes for mounting cover plates - Closed exterior - Mount for dividing strips and grounding cables - Mount for potential equalizer

Function-integrated profile 60x120 M12/- - Construction profiles with usable interior space for guiding cables and hoses - 2 parts (profile and cover) - Cover with hinge function on both sides - Concealed 10 mm groove for mounting socket strips or installation elements - Screw holes for mounting cover plates - Closed exterior - Mount for dividing strips and grounding cables - Mount for potential equalizer