Bosch Rexroth Ersatzteile für industrielle Automatisierung

PE 5/OC positioning unit - Positioning a workpiece pallet in a manual or automated processing station in the longitudinal conveyor with high positioning accuracy requirements (±0.3 mm) - Can be used with all WT 5 workpiece pallets - Installation from below - Lift over transport level: 5 mm - Positioning accuracy: ±0.3 mm in x and y direction - Permissible vertical process force with center load: up to 4000 Nregardless of the WT weight - Suitable for ST 5/OC - Compressed air connection: 5 ... 6 bar - Push in air connection: 8 mm

Material shelf Basic, aluminum - Material shelf for ergonomic accessibility of containers (kanban), materials, measuring instruments and other aids at Rexroth workstations - For implementing the 2-bin system - Can be attached at any desired incline, height or offset - Material shelf Basic with frame profile 22.5x45 with docking aids for easy loading and removal of materials - Attachment fixed with brackets (included) or swiveling with swivel fastening - Customized assembly possible from individual components - Aluminum for heavy loads

PE 5/T Positioning Unit - Positioning a workpiece pallet in a manual or automated processing station in the transverse conveyor with high positioning accuracy requirements (±0.3 mm) - Can be used with all WT 5 workpiece pallets - Installation from above also possible - Lift over transport level: 5 mm - Positioning accuracy: ±0.3 mm in x and y direction - Permissible vertical process force with center load: up to 4000 N2) regardless of the WT weight - Suitable for ST 5/XH and ST 5/H (not ST 5/XH‑FR or ST 5/H‑FR) - Compressed air connection: 5 ... 6 bar - Push in air connection: 8 mm - 2) If assembling in a ST 5/H section place legs directly in front of and behind the PE 5/T.

Workstation material shuttle - Parts positioned within grab area of workstation - Short conversion times with quick exchange of precommissioned material shuttles - Can be equipped and sized to meet specific requirements - Available as ESD-conductive version - Design: Fully assembled or as a kit for self-assembly - Optional information board for supplying information directly at location - Adjustable material shelf height, offset, and tilt to ensure ergonomic grabbing - Material shelves Basic including lettering clip; selection of various plates - LR: Ball bearing, with locking mechanism locking device - Can be used in combination with workstation or for supplying materials in conjunction with the manual linking system EcoFlow

Workstation - Large number of adjustment options for high versatility - Freely selectable geometry and functionality - Available as ESD-conductive version - Fully assembled or as a kit for self-assembly - Allows for the addition of any desired modules, including cross ties and conveyor tracks as well as individual components - Note: According to IEC 60364-4-41: Low-voltage electrical installations – Part 4-41: Protection for safety – Protection against electric shock:411.3.3 Additional protection In a.c. systems, additional protection by means of a residual current protective device (RCD) in accordance with 415.1 shall be provided for – socket-outlets with a rated current not exceeding 20 A that are for use by ordinary persons and are intended for general use.

Curve KU 2/180 - 180° curve conveyor for the workpiece pallet - Curve with own drive - Max. permissible load up to 70 kg in accumulation operation - Conveyor Medium Flat Top Chain - Automatic chain tensioning system - Plastic chain guides - Accumulation operation possible - Can be combined with WT 2, WT 2/F, WT 2/H, WT 2/F-H and WT 2/LS

Material shelf Basic, SB B200...1000 - Material shelf for ergonomic accessibility of containers (kanban), materials, measuring instruments and other aids at Rexroth workstations - For implementing the 2-bin system - Can be attached at any desired incline, height or offset - Material shelf Basic with frame profile 22.5x45 with docking aids for easy loading and removal of materials - Attachment fixed with brackets (included) or swiveling with swivel fastening - Customized assembly possible from individual components

Material shelf Basic, PP B200...1480 - Material shelf for ergonomic accessibility of containers (kanban), materials, measuring instruments and other aids at Rexroth workstations - For implementing the 2-bin system - Can be attached at any desired incline, height or offset - Material shelf Basic with frame profile 22.5x45 with docking aids for easy loading and removal of materials - Attachment fixed with brackets (included) or swiveling with swivel fastening - Customized assembly possible from individual components

Material Shuttle Logistics - C-parts supply on side of workstation - Manual linking of two workstations or of supermarket shelves with workstations and production islands - Can be equipped and sized to meet specific requirements - Available as ESD-conductive version - Design: Fully assembled or as a kit for self-assembly - Optional information board for supplying information directly at location - Adjustable material shelf height, offset, and tilt to ensure ergonomic grabbing - Material shelves Basic including lettering clip; selection of various plates - LR: Ball bearing, with locking mechanism locking device

Curve KU 2/90 - 90° curve conveyor for the workpiece pallet - Curve with own drive - Max. permissible load up to 90 kg in accumulation operation - Conveyor Medium Flat Top Chain - Accumulation operation possible - Plastic chain guides - Automatic chain tensioning system - Can be combined with WT 2, WT 2/F, WT 2/H, WT 2/F-H and WT 2/LS

Flow Rack XLean - Material supply in the supermarket or directly at the workstation - Cost-effective solution with conveyor tracks consisting of steel profiles and plastic rollers - Available as ESD-conductive version - Design: Fully assembled or as a kit for self-assembly - Allows for the addition of any desired modules, including cross ties and conveyor tracks as well as individual components

Table top - Table top for use in constructing Economic and Basic type Rexroth workstations for various mechanical loads - Can be configured with variable dimensions or with fixed standard dimensions - The Economic table top is suited for normal levels of mechanical stress on the table top surface - Table top Basic with hard laminate coating suitable for high mechanical stress on the table top surface– Highly abrasion-resistant– High impact resistance and scratch resistance– Resistant to organic solvents, weak acids and alkalis, gasoline and oil– Temperature-resistant at short intervals up to 180 °C - Available in ESD-conductive version: safe conduction (without extra wiring) of charges through volume conductive base materialsConduction resistance (R) =104 ... 109 Ω

Footrest Economic - For 0-7° inclination - For low-fatigue sitting at the workstation - Attachment to the table frame for box or desk type - Oil-resistant - Aluminum U-profile on front edge to prevent premature wear of the footrest edge - Suitable for the construction of ESD workstations

Footrest Basic - With fixed inclination of 5° - For low-fatigue sitting at the workstation - Easy height adjustment while seated (adjustment range: 250 mm) - Installed on table frame using attachment kit - Installed on free-standing support frame using attachment kit - Oil-resistant

Conveyor track EcoFlow with rail holder - Rail holder for suspension on the tubular cross tie: preferably used in flow rack systems or at workstations for supplying materials in the accessory upright - For supplying materials to workstations and in flow rack systems - For the manual linking of workstations - Aluminum U-profile conveyor track - Full-width rollers available in plastic, steel or stainless steel - Recommended conveyor track width: BF = container width b + 5 mm - Save money by choosing the larger roller distance R - Available as ESD-conductive version

The single-track section CS/C is a conveyor section that is ready for operation with own drive for the transportation of small parts for mounting and assembly workstations - Motor connection: optionally with cable/plug or terminal box motor connection - Motor mounting right or left - Conveyor medium: plastic flat top chain (with KA = A suitable for use in an EPA) - Special models on request - Reversible operation is possible for l ≤ 2000 mm and environments without small parts

Conveyor track EcoFlow with stop plate - Stop plates suitable for the manual linking of workstations - For supplying materials to workstations and in flow rack systems - For the manual linking of workstations - Aluminum U-profile conveyor track - Full-width rollers available in plastic, steel or stainless steel - Recommended conveyor track width: BF = container width b + 5 mm - Save money by choosing the larger roller distance R - Available as ESD-conductive version

Curve CU 1/90 - The drive takes place via the belt section. No additional drive is required for the curve function. - Section load up to 30 kg - Conveyor medium: Toothed belt with mesh top, suitable for use in an EPA - Curve direction right (KR = R) or left (KR = L) - Motor mounting right (MA=R) with KR=L or motor mounting left (MA=L) with KR=R - Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K) - Special models on request

Height-adjustable workstation - Large number of adjustment options for high versatility - Freely selectable geometry and functionality - Independent adjustment of material feed and table top heights - Available as ESD-conductive version - Fully assembled or as a kit for self-assembly - Allows for the addition of any desired modules, including cross ties and conveyor tracks as well as individual components

Conveyor track Lean with rail holder, single-color rollers - Aluminum U-profile conveyor track - Conveyor media for every requirement:– rollers with or without roller flange. 4 colors serve for visualization of supply (kanban) or from good/reject parts.– Roller elements with and without roller flange (RE45, RE45SK)– Slide rails with or without integrated lateral guide (GS, GSSK) - Rail holders for suspending to tubular cross tie - Available as ESD-conductive version (U-profile: aluminum plain)