Phoenix Contact Ersatzteile für industrielle Automatisierung

The device is designed with 8 M12 Ethernet ports that allow for PoE functionality according to IEEE 802.3at/802.3af standards, enabling the coupling of network segments with varying transmission speeds. It automatically detects data rates of 10/100/1000 Mbps and accommodates jumbo frames up to 9600 bytes. The FL SWITCH 1708 M12 POE also includes an autocrossing function, enhancing connectivity options.With an IP67 protection rating, this switch is suitable for demanding industrial environments, ensuring reliable operation between -40 °C and 70 °C, with non-condensing humidity levels from 10% to 95%. The maximum conductor length for twisted pair connections is 100 meters, providing flexibility in network design.Power is supplied via a 24 V DC M12 connector, and the device has a maximum current consumption of 12 A under nominal load. This switch also features status and diagnostic indicators, including LEDs for power supply and Ethernet port status, facilitating straightforward monitoring and maintenance.

PLC-INTERFACE with electronic changeover contact, consisting of PLC-BSC.../21 basic terminal block with screw connection and integrated miniature solid-state relay, for mounting on NS 35/7,5 DIN rail, 1 changeover contact, input: 24 V DC, output: 3 V DC ... 48 V DC/500 mA

This surge protection device, designated as S-PT-1X2-24DC-3/4", is engineered for sensor applications, ensuring reliability in demanding environments with an IP67 rating. It allows for direct mounting using a 3/4" NPT outer thread, facilitating easy installation. The device features a cable gland for the signal cable, which supports a robust two-stage protective circuit.Constructed from zinc die-cast with a bronzed and nickel-plated surface, this module ensures durability and corrosion resistance. It functions effectively across a wide range of operational conditions, with an ambient temperature rating from -40 °C to 85 °C and an altitude tolerance up to 2000 m above sea level. The surge protection capabilities include a nominal discharge current of 10 kA for both line-line and line-ground, providing strong defense against electrical surges.The device operates at a nominal voltage of 24 V DC with a maximum continuous operating voltage of 40 V DC. It supports a rated current of 450 mA at 55 °C, while maintaining a low residual voltage of ≤ 55 V under normal operating conditions. This ensures minimal disruption to the connected sensors.In terms of operational specifications, the unit is characterized by a response time of ≤ 1 ns for line-line connections and ≤ 100 ns for line-earth connections, ensuring rapid action during transient events. Its design complies with IEC 60664-1 / VDE 0110-1 and IEC 61643-21 standards, making it suitable for various industrial applications where surge protection is critical.

The M23 Coupler Connector is designed with a straight long configuration and shielded for optimal signal integrity. It is suitable for both standard and SPEEDCON interlock applications. This connector features 13 positions with a contact arrangement of 8+4+PE, utilizing pin contacts with a crimp connection method.With a cable diameter range of 7.5 mm to 18 mm, this connector is compliant with RoHS II regulations, specifically as an alternative product without Exemption 6c (Pb Designation Code for this product is SH-8EPS48A9LDLS. The connector supports a rated current of 30 A and a rated voltage of 630 V AC for power contacts, while signal contacts can handle up to 8 A with a rated voltage of 50 V.Constructed from durable materials, including a PA 6.6 insulating body and a copper zinc alloy housing, this connector ensures reliable performance in demanding environments. It is rated for operation in temperatures ranging from -40 °C to 115 °C and provides a degree of protection of IP67 when plugged in. This product is manufactured in Germany.

Panel feed-through, Range of articles: PRC 35, Device connector, rear mounting, housing material: PPE, color: black, number of positions: 5, rated voltage: 690 V AC, rated current: 35 A, Connection method: Crimp connection, Type of contact: Pin. This item is also available with other cable lengths. For your specific requirements, please contact your local PHOENIX CONTACT subsidiary.

The AS-Interface distributor, designated as SAC-ASI-J-Y-B-PUR-1,0-FS SCO, facilitates the connection of two flat-ribbon conductors to a 1.0 m PUR round cable with a straight M12-SPEEDCON socket. This device is characterized by its high degree of protection, rated at IP65, making it suitable for various industrial environments.Constructed with a TPU grip body, it supports a nominal voltage of ≤ 32 V DC and a nominal current of 4 A. The connection method utilized is the AS-i penetration technique, featuring a bus system compliant with AS-Interface specifications. The distributor includes four positions, coded 'A', ensuring secure connections.With a tightness torque of 0.4 Nm and a capability for at least 100 insertion/withdrawal cycles, this distributor is designed for durability. The cable, made from halogen-free black PUR, has a diameter of 4.30 mm ±0.2 mm and incorporates four twisted signal lines with a cross-section of 4x 0.34 mm². Operating temperature ranges from -40 °C to 80 °C for fixed routing and -25 °C to 75 °C for mobile applications, ensuring reliability in diverse operational settings.

Inline, Analog output terminal, Analog outputs: 2, 0 V ... 10 V, -10 V ... 10 V, connection technology: 2-conductor, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector and labeling field

The HC-B 6-TMB-100/O1STM25G-EEE is a sleeve housing designed for use with HEAVYCON ADVANCE B6 contact inserts, suitable for marine and EMC applications. It is constructed from die-cast aluminum with salt water resistance, ensuring durability in harsh environments.With a height of 100 mm, the housing provides a single straight cable outlet through an M25 thread. The design incorporates a conductive seal made from NBR material, contributing to its shielding capabilities. Additionally, the housing features a bayonet locking mechanism utilizing stainless steel components for secure fastening.Notably, this housing has a degree of protection rated at IP66, making it well-suited for outdoor applications where exposure to moisture and dust is a concern. It can operate within a temperature range of -40 °C to 125 °C, accommodating various environmental conditions.For optimal performance, it is advised to remove any insulating powder coating from the control cabinet panel in the area of the profile gasket to enhance the shielding effect.

The HC-B16-I-TPT-M-32 contact insert is designed for power applications, featuring a total of 16 positions plus protective earth (PE). This product is structured in size B16 and allows for two connections per position via a reliable Push-in connection method.It supports a rated voltage of 500 V and a rated current of 16 A, accommodating a conductor cross-section range of 0.25 mm² to 1.5 mm², which provides flexibility in wiring options. The ambient temperature range for operation extends from -40 °C to 125 °C, ensuring functionality in diverse environments.Construction adheres to stringent standards with a flammability rating of V0 as per UL 94. The contact material consists of copper alloy with a silver-plated surface, enhancing conductivity and durability. The item measures 34 mm in width, 34.6 mm in height, and 84 mm in length, with a drill hole distance of 77.5 mm horizontally.For installation, it is vital to utilize a housing with at least IP54 protection to ensure proper operation without load or voltage. The product complies with various testing standards including DIN EN 61984, and is suitable for environments that require adherence to fire protection regulations in rail vehicles.

The contact insert, designated as HC-B 6-I-CT-F, is engineered with 6+PE positions and conforms to size B6 specifications. Each position supports a single connection and employs a crimp connection method, making it suitable for power applications. The rated voltage is 500 V, with a maximum current of 16 A, and it accepts conductor cross-sections ranging from 0.5 mm² to 4 mm².This component is constructed to operate under specific conditions, requiring installation in a housing with at least IP54 protection. Its dimensions include a width of 34 mm, a height of 34.6 mm, and a length of 50.5 mm. The contact material is a copper alloy with a silver or gold surface finish, ensuring reliable conductivity. The device is rated for overvoltage category III and has a pollution degree of 3.The contact insert is designed for high durability, capable of withstanding ≥ 500 insertion/withdrawal cycles, and features a flammability rating of V0 according to UL 94. Its operational temperature range spans from -40 °C to 125 °C, accommodating variations including contact heating. Compliance with standards such as DIN EN 61984 ensures its reliability in various applications.

The PSR-M-EM5-TTL2-SC serves as a safe extension module for monitoring critical parameters including zero-speed, rotational speed, and rotational direction for two axes. It integrates NPN/PNP proximity switching capabilities and supports two TTL encoders, ensuring precise monitoring and control.This device operates with a nominal control supply voltage of 24 V DC, with a tolerance of -20% to +20%. It includes a pluggable screw terminal block for ease of installation and a DIN rail TBUS connector for connection to a master module. The rated surge voltage is basic insulation of 4 kV, providing a significant level of protection.Designed for industrial applications, the module adheres to safety standards with a Performance Level (PL) of e and a Safety Integrity Level (SIL) of 3. It is capable of functioning effectively within an ambient temperature range of -10 °C to 55 °C while maintaining operational integrity. The module's housing is constructed from non-reinforced polyamide, colored in yellow (RAL 1018), and is rated at IP20 for protection, with a minimum installation location requirement of IP54.

The 12X2,5-FE distribution block is designed for efficient electrical connections, with a nominal voltage rating of 450 V and a maximum current capacity of 24 A. This unit supports a wide range of wire cross sections from 0.14 mm² to 4 mm², utilizing a push-in connection method that enhances installation speed and reliability.Installation is flexible, allowing for snapping onto a DIN rail adapter or direct mounting with a flange. The block's construction features a black and yellow color scheme, providing clear visual identification. For enhanced functionality, multiple blocks can be interconnected through the conductor shaft, and relevant plug-in bridges are available as accessories.Notably, the item adheres to the IEC 60998-2-2 standard and showcases a maximum load current of 32 A with a maximum total current of 48 A. The operational temperature range spans from -60 °C to +110 °C, ensuring reliability under various conditions. Additionally, the unit meets stringent fire safety standards for rail vehicles, classified under DIN EN 45545-2, and passes tests for flammability as per UL 94 with a V0 rating.Designation Code: PTFIX 12X2,5-FE.

The ST-B250C1500 component connector is engineered for use with 4-position components, integrating a bridge rectifier B 250 C 1500. It supports a reverse voltage of 600 V and operates at a nominal voltage of 250 V with a current rating of 1.5 A. The connector requires two basic terminal blocks for complete functionality.With a compact height of 19 mm, this connector is designed for easy integration, featuring a plug-in connection method. The component is constructed from durable PA insulating material, rated for a temperature index of 130 °C. Its operational temperature range extends from -60 °C to 110 °C, making it suitable for a variety of demanding environments.This unit is characterized by its gray color (RAL 7042) and a compact footprint, measuring 42 mm in length, 41.6 mm in depth, and 12 mm in width. It adheres to stringent fire protection standards for rail vehicles and has passed various flammability and smoke toxicity tests.

The limit value switch provides an Ex i input designed for active current and voltage signals, integrated with a relay output configured as a changeover contact. It allows for precise adjustments through DIP switches and a potentiometer, ensuring a tailored response to specific operational needs. With galvanic 3-way electrical isolation, this device meets rigorous safety standards, achieving up to SIL2 (SC3) and PLc Cat.1 ratings.Designed for robust performance, the product operates efficiently with a nominal supply voltage range of 12 V DC to 24 V DC, accommodating variations from -20% to +25%. It consumes a typical current of 38 mA at 24 V DC, with a maximum consumption of 90 mA at 10 V DC. The switch exhibits a switching point accuracy of less than 0.1% and a step response of 22 ms, ensuring reliable and quick signal management.Connections are facilitated via screw terminals with a stripping length of 7 mm, supporting rigid and flexible conductor cross-sections from 0.2 mm² to 2.5 mm². The device is constructed from PA 6.6-FR material, rated V0 for flammability, and is suitable for mounting on DIN rails. Additionally, it complies with the EMC directive, ensuring electromagnetic compatibility and operational integrity.

The hybrid motor starter, designated as ELR H3-IES-SC-230AC/500AC-9, is engineered for the activation of three-phase AC motors operating at voltages up to 550 V AC. This unit accepts an input voltage of 230 V AC and is capable of delivering an output current of 9 A. It is equipped with an emergency stop function and an adjustable overload shutdown feature, enhancing operational safety.Operating within a mains frequency range of 50/60 Hz, the starter offers a rated control supply voltage of 230 V AC, with a control voltage range of 85 V AC to 253 V AC. The device’s design allows for a maximum power dissipation of 16.1 W under peak conditions, while ensuring energy efficiency with a minimum dissipation of 2.6 W.In terms of protective features, the starter includes surge protection and is rated for an insulation voltage of 500 V, with a rated surge voltage of 4 kV. It adheres to overvoltage category III standards and maintains a pollution degree of 2. The unit provides safe isolation characteristics as per IEC 60947-1 and IEC 60947-1/EN 50178 standards, ensuring reliable performance.Additional specifications include a compact form factor with dimensions of 22.5 mm in width, 107 mm in height, and 114 mm in depth, and an operating temperature range of -25 °C to 70 °C, subject to derating. The starter features LED indicators for operational status and error notifications, enhancing usability in various environments.

The SPB 2,5/10 plug is designed for applications requiring reliable electrical connections. It operates at a nominal voltage of 500 V and is rated for a nominal current of 24 A, making it suitable for various industrial environments. Featuring 10 positions, the plug utilizes a spring-cage connection method, which allows for secure and efficient wiring. The rated cross section is 2.5 mm², accommodating conductor sizes ranging from 0.08 mm² to 4 mm². The color of the plug is gray, ensuring visibility and compatibility in diverse settings. This product is manufactured in Poland, adhering to stringent quality standards.

The Inline controller facilitates communication through both PROFINET and Modbus/TCP. It is designed for modular applications and is programmed using PC Worx Express or PC Worx in accordance with IEC 61131-3. This device has a clock frequency of 64 MHz and features 1 Mbyte of program memory along with 48 kByte of retentive data storage (NVRAM). With a maximum of 128 supported devices and the capability to manage 8 control tasks, it allows for efficient data handling with a maximum process data capacity of 32768 bits. The controller can connect up to 63 local bus devices while adhering to current consumption limits, and supports up to 16 Modbus/TCP clients in firmware version 4.42 or later. Power supply requirements specify 24 V DC with a range from 19.2 V DC to 30 V DC, accommodating a maximum current draw of 8 A DC. The device features 8 digital inputs with a maximum cable length of 30 m and 4 digital outputs capable of handling up to 500 mA per channel. It is housed in a compact design measuring 80 mm in width, 119.8 mm in height, and 71.5 mm in depth, with an IP20 protection rating. This controller is intended exclusively for industrial applications, and is not suitable for use in potentially explosive environments in China. It complies with the EMC Directive 2014/30/EU and has undergone rigorous testing for environmental resilience, including shock and vibration resistance.

Sensor/actuator box, application: Standard, connection method: M12-SPEEDCON-socket Plastic, number of slots: 8, number of positions: 4, coding: A - standard, slot assignment: single, status display: yes, pnp; master cable connection: Spring-cage connection 180°, shielding: no

The FLK 50-PA/EZ-DR/KS/1400/YUC is a cast front adapter equipped with a round cable, facilitating connections to Yokogawa controllers through a 50-position socket strip that is injection-molded on both sides. With a cable length of 14.0 m, this adapter is designed to meet the operational needs of various applications.This adapter supports an operating voltage of ≤ 30 V DC and has a nominal operating mode with a 100% operating factor. Each connection pathway can handle a current of ≤ 500 mA when uncoiled, ensuring reliable performance. The product complies with the IEC 60603-13 standard and features a tightening torque of 0.5 Nm for secure screw connections.Constructed with a semi-rigid PVC outer sheath, the cable offers durability with a weight of 2,733.6 g. It operates effectively within ambient temperatures ranging from -40 °C to 70 °C for fixed installations, and -10 °C to 70 °C for flexible applications. The adapter is suitable for environments with an altitude of ≤ 2000 m and is designed to withstand certain conditions such as occasional oil splashes.For installation, it is important to adhere to the specifications outlined in the installation directive. Additionally, when used with third-party products, the relevant safety and operational guidelines provided by those manufacturers should also be observed.

PCB terminal block, nominal current: 17.5 A, rated voltage (III/2): 400 V, nominal cross section: 1.5 mm², number of potentials: 6, number of rows: 2, number of positions per row: 3, product range: MKKDS 1,5, pitch: 5.08 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green, Pin layout: Linear pinning, Solder pin [P]: 3.5 mm, number of solder pins per potential: 1, type of packaging: packed in cardboard. The article can be aligned to create different nos. of positions!