Schneider Automation Ersatzteile – Zuverlässige Lösungen für die Industrieautomation

The XS7 flat inductive proximity sensor features a compact design measuring 40 x 40 x 15 mm, housed in a durable PBT enclosure. It operates with a supply voltage range of 12V to 24V DC and is equipped with a standard M8 connector suitable for existing sensor cabling in the market. The sensor is designed for direct surface mounting, facilitated by four screw fixing points, ensuring stable and secure installation. This sensor maintains high performance under harsh conditions, with an IP67 rating that protects it from dust and water ingress, making it suitable for various industrial applications. It can function effectively in extreme temperatures ranging from -25°C to +70°C. The built-in yellow LED indicator provides clear output status, aiding in sensor setup and troubleshooting. With a switching capacity of up to 100 mA DC and overload protection, the XS7 sensor ensures reliable operation. It features a flush mountable detection face and a maximum operating zone of 12 mm, providing flexibility in installation. Certified with C-Tick, ECOLAB, CSA, and UL, this sensor meets rigorous industry standards for safety and performance.

The MN undervoltage release is intended for use with Compact NS 630b to Compact NS 3200 devices. It operates within a voltage range of 200VDC to 250VDC or 200VAC to 250VAC at 50/60Hz. This auxiliary component is essential for emergency shutdown or remote opening functions. It triggers the circuit breaker to open when the control voltage drops below 35% of its rated voltage (Un), ensuring safe operation in critical situations.Complying with the IEC 60947-2 standard, this undervoltage release is compatible with both the ComPacT NS630b...1600 and ComPacT NS1600b...3200 models. The device features a fixed mounting mode and has a response time of 90 ms ± 5% for the Compact NS630b...1600 and Compact NS1600b...3200 series. With a supply holding power of 4.5 VA, it provides reliable operation within its specified parameters.

The XCSPR Safety Limit Switch is constructed with a 30 mm stainless steel spindle and a double insulated plastic enclosure, ensuring durability in harsh conditions. It features a Pg 11 cable gland entry and includes two normally closed slow break contacts. The switch is rated for a reliability of B10D 5,000,000, supporting a long operational life.With an IP67 protection class, it is suitable for heavy-duty applications. Compliance with various industry standards such as EN/ISO 14119, EN/IEC 60204-1, and UL 508 ensures its reliability and safety. When appropriately wired to a compatible safety control unit, the device meets Category 4 requirements and achieves performance level PL e, as well as SIL 3 as outlined in EN/ISO 13849-1 and EN/IEC 61508.

Designed for a variety of industrial applications, the limit switch from the XC Standard range features a spring return thermoplastic roller lever with variable length. The device incorporates a rotary operating head and allows for lateral approach in two directions, enabling versatile installation options. With a rated operational current of 3A at 240V AC and a conventional enclosed thermal current of 10A, it demonstrates robustness in demanding environments.The product is housed in a fixed plastic body, measuring 30mm in width, 42mm in depth, and between 108mm to 157mm in height, weighing 0.18kg. It is equipped with screw clamp terminals for electrical connections and has an entry tapped for a PG11 cable gland. Rated at IP65 and IK04, it is suitable for various sectors including packaging, materials handling, and food and beverage industries.Compliance with multiple standards, including EN 60947-5-1 and UL 508, ensures safety and reliability. The limit switch offers a mechanical durability of approximately 10 million cycles and an electrical durability of 5 million cycles, making it suitable for repetitive operations. The positive opening operation feature enhances safety, allowing for its use in critical applications.

The TeSys D contactor is designed for motor control applications with a capacity of up to 50A at 690V AC-3. It features three normally open (3NO) poles and is equipped with a 60V DC control coil, complemented by a transient suppressor module. The device incorporates one normally open and one normally closed auxiliary contact, which is mirror certified. Power connections are established via EverLink BTR screw connectors, while control connections utilize spring terminals.This contactor operates efficiently in environments up to 60°C and can handle an operating rate of up to 3600 cycles per hour. Its compact design, measuring 55mm in width, allows for flexible installation options, including DIN-rail mounting and screw fixing. The device is compliant with multiple standards including IEC, UL, and CSA, and meets Green Premium requirements (RoHS/REACh).Notably, this model supports a range of motor power ratings, capable of handling up to 22kW at 400V AC for power circuits. It is rated for a breaking capacity of 900A at 440V, ensuring reliable operation under varying load conditions. The contactor includes features such as a built-in bidirectional peak limiting diode suppressor, enhancing its operational safety and longevity. Furthermore, it displays high mechanical durability with up to 10 million cycles, and its electrical durability stands at 1.45 million cycles under AC-3 conditions.

LC2K0910F7 is a compact 3-pole TeSys K reversing contactor from Schneider Electric for motor applications. Rated 9A AC-3 4kW@400V, it includes a 110V 50/60Hz AC coil, 2NO auxiliary contacts, a mechanical interlock and pre-wired reversing circuit. LC2K0910F7 is a 3-pole TeSys K reversing contactor from Schneider Electric for simple motor applications rated up to 4kW@400V. Very compact, DIN-rail compatible, with connections by screw clamp terminals, it is assembled with a mechanical interlock and a pre-wired reversing circuit. It includes a 110V 50/60Hz AC coil and 2NO built-in auxiliary contacts. Available worldwide, it complies with multi-standards (IEC, UL, CSA, CCC, EAC, Marine) and is certified Green Premium (RoHs/Reach). Very compact, 90mm wide, for DIN-rail and panel mounting. Assembled with mechanical interlock and pre-wired reversing circuit. Provides a 110V AC coil compatible 50/60Hz and 2NO built-in auxiliary contact. Can be completed with auxiliary contact blocks (LA1K, LA2K) and thermal relays (LR2K).

The XUY photoelectric sensor, designed with a fork configuration, utilizes a through-beam detection system for reliable performance. This sensor supports a nominal sensing distance of 120mm and offers programmable discrete outputs, allowing for either 1 normally opened (NO) or 1 normally closed (NC) configuration, with both PNP and NPN solid-state outputs available.Constructed from painted aluminium and polyamide/glass, this device provides durability and an IP65 protection rating, making it suitable for various industrial environments. Its 12...24 VDC supply voltage range includes reverse polarity protection, with a no-load current consumption of 40mA and a switching frequency of up to 10kHz. The sensor is equipped with an infrared LED for modulated emission.With a weight of 0.19kg, the XUY sensor is ideal for applications in material handling, packaging, labelling, assembly, lifts, escalators, and the food and beverage industry. It features a 4-pin M8 male connector for electrical connections and has a sensitivity setup controlled by a numeric potentiometer. Notably, it operates effectively in ambient temperatures ranging from -20°C to 60°C and withstands vibration and shock in accordance with IEC standards. Certifications include CE and cULus.

The ground bar kit is designed for use with NQ panelboards and supports up to 12 circuits with a maximum rating of 225A. This component facilitates safe and efficient grounding in electrical systems, ensuring compliance with relevant safety standards.Measuring 96 mm in length, the bar accommodates various wire sizes including AWG 14 to AWG 10 for copper and AWG 12 to AWG 10 for aluminum, allowing for versatile applications. The maximum segment length is 80 mm, and the device features 9 connectors for enhanced connectivity.Installation is straightforward with direct mounting to the back of the enclosure, and it includes 2 screws for secure attachment. The tightening torque specifications range from 20 lb.in for certain wire gauges to 35 lb.in for larger sizes, providing reliable connections.This product aligns with sustainability initiatives, being free of toxic heavy metals and compliant with California Proposition 65 regulations. Additionally, it meets the requirements of the China RoHS Regulation and the EU RoHS Directive, ensuring a commitment to environmental safety.

The limit switch XC Standard XCMD is a mechanical device that translates motion into an electrical signal, equipped with 1NC + 1NO snap action contacts for effective switching. Its operation is facilitated by a spring return metal roller lever that supports lateral approach from two directions, enabling versatility in installation.Constructed from Zamak, this fixed body limit switch measures 30mm in width, 16mm in depth, and 50mm in height. It incorporates a rotary head design, ensuring compatibility with various industrial applications including packaging, materials handling, and food processing. The operating head movement is rotary, and it is actuated by a 30° cam.Electrical connectivity is achieved through a removable cable connector, accompanied by a 3m cable. Rated for IP66, IP67, and IP68 protection, the device is suitable for harsh environments. Additionally, it has a mechanical durability of approximately 10 million cycles and an electrical durability of 5 million cycles, indicating long service life.This limit switch meets several international standards including UL 508, EN/IEC 60204-1, and CSA C22.2 No 14, ensuring compliance and reliability in various operational conditions. The product also features a positive opening mechanism, which is critical for safety in machine design.

The heavy-duty fusible safety switch is engineered for superior performance in rigorous environments. With a line rated current of 100A and operational voltage of 600V AC/DC, this device is suitable for heavy applications. It features a three-pole configuration and is compatible with time-delay fuses rated for 15HP at 480VAC three-phase, 20HP at 600VAC three-phase, and 15HP at 600VDC.This switch supports a wiring configuration of 4 wires, accommodating aluminum wire sizes from 12 to 6 AWG and copper wire sizes from 14 to 6 AWG. Its enclosure is constructed from stainless steel and is rated NEMA 4/4X/5, ensuring protection against dust and water ingress. The dimensions include a height of 14.93 inches, width of 8.67 inches, and depth of 5.11 inches. A neutral is pre-installed, facilitating easier setup.Furthermore, the switch's design complies with UL standards, with certification file E2875, ensuring reliability and safety in various commercial and industrial applications.

This drawout circuit breaker frame is designed for the MasterPact MTZ2 10L1 series and accommodates three poles. With a rated current of 1000A, this frame operates effectively within a maximum voltage of 690VAC at a frequency of 50/60Hz. The breaking capacity (Icu) is rated at 150kA rms for 415VAC at 50/60Hz, ensuring robust protection against overloads and short circuits.Compliance with international standards such as IEC/EN 60947-1 and IEC/EN 60947-2 highlights its reliability in power distribution protection. The frame must be paired with an appropriate chassis and can integrate with the MicroLogic X control unit, which is sold separately. This combination enhances safety and energy efficiency in various applications.The dimensions of the frame are 441mm in width, 439mm in height, and 403mm in depth when the chassis is included, while the depth without the chassis is 300mm. The MasterPact MTZ2 series supports mounting on rails or base plates, facilitating installation flexibility.

The MasterPact MTZ1 10H1 is designed as a basic frame for a 4-pole fixed circuit breaker, with a rated current of 1000A. This circuit breaker operates effectively at a maximum voltage of 690VAC across a frequency range of 50/60Hz, and it offers a breaking capacity (Icu) of 42kA at 415VAC and 440VAC. Its advanced design protects electrical systems from damage due to overloads, short circuits, and ground faults.With dimensions measuring 346mm in width, 301mm in height, and 209mm in depth, the device is compatible with the MicroLogic X control unit, which must be ordered separately. This compatibility enhances safety and allows for energy efficiency. The circuit breaker adheres to international standards including IEC/EN 60947-1 and IEC/EN 60947-2, ensuring reliability and performance.Furthermore, it supports various optional functions and accessories, making it versatile for a range of applications. The MasterPact MTZ series is part of an eco-friendly initiative, aligning with Schneider's global environmental data program.

This Multi9 C60BPR is a low voltage miniature circuit breaker (MCB). It is a 3P circuit breaker with 3 protected poles, 35A rated current and C tripping curve. The rated short circuit breaking capacity goes up to 10kA at 415VAC conforming to EN/IEC 60947-2 standard and 10kA at 415VAC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 240VAC. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 6kV. The product can be clipped on a DIN rail. Its width is 6 pitches of 9mm. Pollution degree is 3. The product colour is light grey (RAL7035). The dimensions are (W) 54mm x (H) 127mm x (D) 72mm. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -30°C to 70°C. The storage temperature is -40°C to 80°C.

The three-pole contactor is engineered for motor control applications with a maximum operational current of 6A at 440V AC-3. This device supports non-inductive loads up to 20A at 690V AC-1. It operates with a 480V, 50/60Hz AC coil and includes a built-in auxiliary contact rated at 1 NO. The contactor is designed for durability and reliability, functioning adequately in environments with temperatures up to 50°C and capable of operating at a rate of 600 cycles per hour.With a compact width of 45mm, it can be mounted using DIN-rail or screw fixing methods. The contactor meets various international standards, including IEC, UL, CSA, and others, ensuring compliance across different markets. The protective treatment of the device adheres to TC standards, providing a degree of protection rated at IP2X.In terms of electrical durability, the contactor can endure 1.3 million cycles at a current of 6A under AC-3 conditions at voltages up to 440V. Its mechanical robustness allows it to withstand shocks and vibrations as specified by IEC 60068 standards. The auxiliary contact composition is instantaneous with 1 NO, and the control circuit voltage operates within the range of 0.8 to 1.15 Uc at temperatures below 50°C.

The XCKD limit switch is constructed in a compact format compliant with CENELEC EN 50047 standards, equipped with a steel roller lever plunger for horizontal actuation. Its body is made from durable Zamak, ensuring longevity in various industrial environments.With a typical electrical durability of 5 million cycles in DC-13 utilization category, this device is ideal for integration into machines used in packaging, materials handling, and food and beverage processing. The switch's modular design allows for easier maintenance and modifications, such as changing the connection type or operator head.This model is fixed to machinery via its body and utilizes snap action for reliable contact operation. It complies with multiple standards, including CCC, UL 508, and IEC 60947-5-1, ensuring safe and efficient operation. The XCKD is compatible with a wide range of XCK heads, facilitating quick replacement when necessary.

This Harmony XVB illuminated unit is supplied with 24V AC/DC and has a integral red flash discharge tube with a strobe light. This red indicating bank lens is designed as an illuminated unit to be connected with base and create complete tower light. It has a 70mm diameter It is impact resistant, dust resistant, water resistant and vibration resistant thanks to its IP66, making it ideal for operation in harsh environments. Its flash discharge tube offers a strobe light, allowing it to clearly display the status of your machines in applications such as automotive, machine tool, material handling, packaging, assembly stations, conveyors. Simple and modular design to allow for easy installation with base unit and make complete tower light. It complies with international standards and certifications (CCC, CSA C22-2 No.14, EN/IEC 60947-5-1, EAC, UL 508 standards and NEMA 4X).

The Multi9 C60BPR is a 2-pole miniature circuit breaker designed for low voltage applications. It features a rated current of 30A and adheres to the D tripping curve, allowing it to effectively handle short circuits, earth leakage, and overloads. The device offers a short circuit breaking capacity of 10kA at 415VAC, complying with the EN/IEC 60947-2 standard. This circuit breaker is suitable for use in both industrial and residential settings, conforming to relevant standards including EN/IEC 60898-1. With an operational voltage of up to 240VAC, it also supports a rated insulation voltage of 500VAC and a rated impulse withstand voltage of 6kV, ensuring reliability under various conditions. The device can endure up to 10,000 electrical cycles and 20,000 mechanical cycles, making it a durable choice for OEMs and control panel builders. Designed for DIN rail mounting, the breaker occupies a width of 4 pitches at 9mm each, with overall dimensions of 36mm x 127mm x 72mm. It operates effectively in temperatures ranging from -30°C to 70°C and can be stored at temperatures between -40°C and 80°C. The product is classified with an IP20 degree of protection on its terminals, ensuring safe operation in typical environments.

The MasterPact MTZ2 16H2 serves as a basic frame for a 3-pole fixed circuit breaker, designed to safeguard electrical systems from overloads, short circuits, and ground faults. With a rated current of 1600A, it operates effectively at a maximum voltage of 690VAC across 50/60Hz networks. This circuit breaker features a breaking capacity (Icu) of 100kA at 440VAC, ensuring reliable operation under fault conditions.The frame is built to be compatible with various MicroLogic control units, which enhance its functionality and allow for customization with optional features and accessories. The dimensions of the unit are 422mm in width, 352mm in height, and 300mm in depth. Compliance with international standards, including IEC/EN 60947-1 and IEC/EN 60947-2, ensures that the MasterPact MTZ2 meets rigorous safety and performance criteria.With a mechanical durability rated at 25,000 cycles, this circuit breaker is designed for prolonged use, making it suitable for various applications in power distribution systems. The unit also adheres to environmental standards, including RoHS compliance and a green premium product status, emphasizing its sustainable design.

The XS9 inductive proximity sensor offers a detection capability for metal objects up to 60mm without direct contact. It utilizes an oscillating electromagnetic field to identify any metallic object that enters its sensing area. This general-purpose sensor is encapsulated in a cubic plastic case measuring 40 x 40 x 117mm and is designed for non-flush mounting.With a nominal sensing distance of 20mm, the XS9 supports a dual output configuration comprising one normally open and one normally closed PNP output. It operates within a temperature range of -25°C to +70°C and is built to withstand harsh environments, conforming to IP65, IP67, and IP69K protection standards. This sensor is especially suitable for applications such as welding machines, characterized by its factor 1 (Fe/Nfe) detection capability.Its electrical connection features screw-clamp terminals, and it consumes a maximum current of 30 mA under no-load conditions. The sensor has a switching frequency of up to 250Hz and is equipped with LED indicators to signal power and output state. It is compliant with UL and CSA certifications, ensuring it meets stringent safety standards.

The Photoelectric Sensor XU, XUA, Diffuse is a part of the XU Application range. It's specifically designed for use in assembly applications. This sensor boasts a robust metal case and a cylindrical design, with an M8 threaded receiver. Powered by DC supply and utilizing solid-state output, this sensor is equipped with an M8 connector. It offers a nominal sensing distance of 0.05m. The sensor operates on a 3-wire PNP NO function, employing a thru-beam system for infrared transmission.