Schneider Automation Ersatzteile – Zuverlässige Lösungen für die Industrieautomation

The TeSys GV4 multifunction circuit breaker, rated at 3 poles (3P), 7A/690V, is specifically engineered to safeguard the operation of 3-phase motors within a power range of 1.5-3kW@400V. This advanced device integrates thermal magnetic protection with enhanced motor protection capabilities, boasting an interrupting capacity (Icu) of 50kA at 400V. The circuit breaker offers start-stop control via a toggle switch and facilitates connections for either bars or cables using lug terminals.The thermal protection feature is adjustable through dials, allowing the setting current (Ir) to be varied between 2.9-7A with a selectable tripping class of either 10 or 20. The magnetic protection is set at 17 In. This multifunction circuit breaker also includes advanced protections that can be configured using a smartphone via wireless NFC, such as short time delay protection (Isd) with a setting range of 5-13 Ir, phase unbalance and loss protection, ground fault protection, locked rotor (jam), and long start. The device provides internal locations for additional auxiliary contact blocks (OF, SD) and voltage trip units (MN, MX). It can be externally equipped with 1 or 2 auxiliary SDx modules to facilitate alarming and fault differentiation.The TeSys GV4 is certified under multiple international standards including IEC, UL, CSA, CCC, EAC, Marine, and ATEX. It also complies with Green Premium standards (RoHS/REACh).

This Micrologic 5.2 E (Energy) is a 4 poles 4d electronic trip unit used on Compact NSX 100/160/250 circuit breakers. This 40A rating electronic trip unit is an optimum choice for all standard and specific applications. It embeds adjustable long time protection against overloads. It provides also adjustable short-time protection and instantaneous protection against short-circuits. Micrologic 5.2 E indicates overloads with Alarm LEDs. The green Ready LED flashes if the circuit breaker is ready to trip. Micrologic 5.2 E is equipped with a display module that gives energy measurement and allows fine adjustment settings. This product is part of our EcoStruxure Power architecture if associated with PowerTag NSX and Compact NSX basic frame.

This is an insulation accessory designed for use with Compact NSX 400/630 or EasyPact CVS 400/630. It provides a protective barrier against direct contact with power circuits, ensuring safety and compliance with electrical standards. Key Features: Mountable upstream and downstream of fixed, plug-in or withdrawable devices Meets IEC 60947-2 clearance distance requirements Provides IP40 degree of protection against dust and splashing liquids Offers IK07 mechanical impact protection

This Compact NSX250F is a complete 3P 3d fixed circuit breaker designed to optimize space and breaking capacity. It is an optimal choice for all standard and specific applications. The breaking capacity (Icu) is 36kA rms at 415VAC 50/60Hz. The operational voltage is 690VAC 50/60Hz. This product embeds a 250A rating thermal-magnetic trip unit (TMD). TMD trip unit provides an adjustable thermal overload protection and a fixed magnetic protection. This 3 poles version (105mm x 161mm x 86mm) comes with a variety of optional functions and accessories. It is compliant with international standards (IEC 60947), CCC, EAC and marine specifications. Compact NSX250F is part of Schneider Electric EcoStruxure Power architecture.

This Compact NSX250F is a complete 3P 3d fixed circuit breaker designed to optimize space and breaking capacity. It is an optimal choice for all standard and specific applications. The breaking capacity (Icu) is 36kA rms at 415VAC 50/60Hz. The operational voltage is 690VAC 50/60Hz. This product embeds a 200A rating thermal-magnetic trip unit (TMD). TMD trip unit provides an adjustable thermal overload protection and a fixed magnetic protection. This 3 poles version (105mm x 161mm x 86mm) comes with a variety of optional functions and accessories. It is compliant with international standards (IEC 60947), CCC, EAC and marine specifications. Compact NSX250F is part of Schneider Electric EcoStruxure Power architecture.

This Modicon MCM safety controller CPU is supplied with 24Vdc, has 8 safe digital inputs, 2 start/restart interlock inputs, 2 output OSSD pairs, 4 test outputs and 2 status outputs and is fitted with captive screw clamp terminals. It embeds a Mini USB 2.0 connector to receive the configuration done with the software EcoStruxure Machine Expert - HVAC. It is an appropriate solution for machines with a small number of safety functions requiring the configuration flexibility of a safety controller. It can be used as standalone or with fourteen expansion modules. The system is expandable up to 128 inputs, 16 outputs and up to 32 diagnostic status outputs, ideal for machines requiring multiple safety function monitoring. This safety controller CPU figures LEDs on its front face, displaying the status (power supply, run, internal or external errors, inputs status, communication, master enable, restart signal, output channels). It is a CPU with a rated supply voltage of 24V DC and a maximum power dissipation of 3W. It is furnished with spring clamp terminals, removable terminal block for electrical connection. It is an IP20 rated product. It weighs 0.26kg. Its dimension are 22.5mm (Depth), 99mm (Height) and 114.5mm (Width). Its housing is red. It is powered with 24 VDC. It is ideal for monitoring safety functions such as emergency stop, guard monitoring, perimeter guarding, position monitoring, speed monitoring and enabling movement. The safe controller CPU Modicon MCM are certified by TüV SÜD meeting the industrial safety standards of Category 4, PL e according to EN/ISO 13849-1 and SILCL 3 according to IEC/EN 61508 and IEC/EN 60261. Compatible accessories for Modicon MCM module are a memory card and the backplane connector. The kit includes 1 x safety controller CPU and 1 x backplane expansion connector. The safety controller CPU instals on Omega 35mm DIN rail conforming to EN 50022. The Modicon MCM modular safety controller system provide flexibility and scalability from 8 inputs, 2 dual/4 single channel outputs up to 128 inputs, 16 dual/32 single channel outputs, up to 32 or 48 diagnostic status outputs. Modicon MCM modular safety controller system are designed to monitor multiple safety functions on and around a machine to minimise the risk of people accessing the dangerous moving parts of the machine.

The Compact NSX160F is a high-performance, fixed circuit breaker designed for optimal space efficiency and breaking capacity. This 3P 3d product offers an impressive Icu of 36kA rms at 415VAC 50/60Hz, with an operational voltage of 690VAC 50/60Hz. The circuit breaker is equipped with a 160A rating thermal-magnetic trip unit (TMD), providing adjustable thermal overload protection and fixed magnetic protection. This compact design measures 105mm x 161mm x 86mm, making it an ideal choice for various applications. It is compliant with international standards such as IEC 60947, CCC, EAC, and marine specifications. The Compact NSX160F is part of Schneider Electric's EcoStruxure Power architecture.

This Micrologic 2.3 is a 3 poles 3d electronic trip unit used on Compact NSX 630 circuit breakers. This 630A rating electronic trip unit is an optimum choice for all standard and specific applications. It embeds an adjustable long time protection against overloads. It provides also an adjustable short-time protection and a fixed instantaneous protection against short-circuits. Micrologic 2.3 indicates overloads with Alarm LEDs. The green Ready LED flashes if the circuit breaker is ready to trip. This product is part of our EcoStruxure Power architecture if associated with PowerTag NSX and Compact NSX basic frame.

These accessories are aluminium bare cable connectors for Compact NSX 100/160/250 and EasyPact CVS 100/160/250. These connectors can receive 1 copper or aluminium cables from 120mm² to 185mm². The connectors snap directly on to the device terminals or are secured by clips to terminal extensions. The rated current is up to 250 A. They are sold by set of 3 parts.

The Compact NSX160L Basic Frame Circuit Breaker is a versatile solution designed to optimize space and breaking capacity for all standard and specific applications. This basic frame comes without a trip unit and is compatible with any type of trip unit, which needs to be ordered separately.With an interrupting capacity (Icu) of 150kA at 415VAC 50/60Hz, this circuit breaker ensures reliable protection for your electrical system. It can operate at a voltage of up to 690VAC 50/60Hz, limited to 440VAC 50/60Hz if there is an earth-leakage protection.The Compact NSX160L Basic Frame Circuit Breaker can be equipped with a variety of optional functions and accessories, making it a flexible solution for your specific needs. It has dimensions of 140mm x 161mm x 86mm and is designed to comply with international standards such as IEC 60947, CCC, EAC, and marine specifications.As part of Schneider Electric's EcoStruxure Power architecture, this circuit breaker offers a seamless integration into your power management system. It is designed to provide reliable, efficient, and sustainable solutions for your electrical needs.

The illuminated unit features a yellow design and is engineered for integration with a base, facilitating the creation of a comprehensive tower light system. The device incorporates an integral LED that enables steady illumination, effectively indicating machine status across a variety of applications including automotive, machine tools, material handling, packaging, assembly stations, and conveyors.Its construction meets rigorous standards, being impact resistant, dust resistant, water resistant, and vibration resistant, as classified by its IP66 rating. This makes it suitable for deployment in demanding environments.With an operational temperature range of -25 to 50 °C for both incandescent and LED sources, it also supports a storage temperature span from -40 to 70 °C. The unit complies with multiple safety standards, including EN/IEC 60947-5-1, and features a pollution degree rating of 2.This model adheres to electrical shock protection classifications, ensuring compliance with class I and class II standards. The specified rated supply voltage is 24V AC and 24...48V DC, enhancing its versatility for various electrical configurations.

The XU Series photoelectric sensors are designed to provide reliable and efficient detection in various industrial applications. These sensors feature a fork design and support a nominal sensing distance of 30mm. They operate on a through-beam detection system, ensuring accurate and consistent results. The sensors come with a normally opened PNP solid state discrete output, making them suitable for a wide range of applications.These photoelectric sensors are IP54 rated, which means they offer robust protection against dust and low-pressure water jets. They are CE certified, indicating compliance with European Union safety standards. The sensors come with a 2m cable for easy electrical connection, adding to their convenience and usability.The XU Series photoelectric sensors are equipped with reverse polarity protection and have a no-load current consumption of ≤20mA. They operate at a switching frequency of ≤1kHz, ensuring reliable performance even in demanding environments. The sensors feature an infrared emission and a single LED for output state indication.The enclosure of these photoelectric sensors is made from ABS/PC with a PMMA lens, providing durability and clarity. They have dimensions of 14mm (Width) x 68mm (Depth) x 59mm (Height) and weigh 0.13kg. These sensors are ideal for material handling, packaging, labelling, assembly, lift, escalators or food and beverage industries.

The 70mm illuminated indicator bank is designed for versatile application in various industrial environments, including automotive and material handling sectors. This unit operates at a maximum supply voltage of 250V AC/DC and features steady lighting. The bulb is not included, allowing for customization based on specific operational needs.Constructed from polycarbonate, this illuminated unit ensures durability and compliance with several international standards including CCC, EAC, CSA C22-2 No 14, and UL 508, as well as meeting NEMA Type 4X criteria for indoor use. The unit is rated for operation at ambient temperatures between -25°C to 50°C for LED and -25°C to 70°C for incandescent bulbs, with a storage temperature range of -40°C to 70°C.With a pollution degree of 2 and an IP66 protection rating on the base unit, the indicator bank is suitable for harsh environments. It features a rated impulse withstand voltage of 4 kV, providing reliable performance and safety in various applications. The unit supports customer assembly of up to 5 units, facilitating tailored installations.

The RXM miniature relay operates at a control circuit voltage of 24 V AC with a frequency of 50/60 Hz, offering a maximum switching capacity of 1250 VA AC. Designed for installation on a RXZE socket, this 2 C/O relay allows for reliable operation in various applications including industrial machines, HVAC systems, and programmable logic controllers (PLCs). With an ambient operating temperature range from -40 °C to 55 °C, it ensures durability in challenging environments.The relay is equipped with an orange mechanical indicator to display the contact status, and its transparent cover enables visual inspection of the contacts. It conforms to IP40 protection standards and meets international certifications including IEC and CE.To enhance its performance under vibration conditions, a metal clamp (RXZ410/RXZ420) can be attached to the socket. The RXM series is particularly suitable for use in low and medium voltage switchgear, motor control applications, and automation control panels. It features a mechanical durability rated at 20 million cycles, ensuring long-term reliability.

The Miniature Circuit Breaker (MCB) Multi9 C60BPR features a two-pole configuration with a rated current of 6A and a C tripping curve. It is designed to handle a short circuit breaking capacity of up to 10kA at 415VAC, adhering to EN/IEC 60947-2 standards. This product also complies with both industrial standards (EN/IEC 60898-1) and residential standards (EN/IEC 60947-2), ensuring reliability in various applications.Offering enhanced protection, the Multi9 C60BPR safeguards both individuals and equipment against electrical hazards, including short circuits, earth leakage, and overload conditions. This device is particularly suitable for original equipment manufacturers (OEMs) and control panel builders. It boasts an electrical endurance of up to 10,000 cycles and a mechanical endurance of 20,000 cycles, ensuring durability under operational stress.The operational voltage is rated at 240VAC, and it has a rated insulation voltage of 500VAC. The rated impulse withstand voltage reaches 6kV. Designed for DIN rail mounting, the product occupies a width of four pitches, measuring 36mm in width, 127mm in height, and 72mm in depth. The IP20 protection degree is compliant with IEC/EN 60529, while the pollution degree is rated at 3.With an operating temperature range of -30°C to 70°C, and a storage temperature range of -40°C to 80°C, the Multi9 C60BPR is engineered to function in diverse environmental conditions. Its light grey color (RAL7035) adds to its industrial suitability.

The NEMA size 1 open starter is designed in accordance with NEMA ICS2 standards. It incorporates a three-pole configuration and is rated for a continuous current of 27 A. This starter can handle up to 10 HP at 200 VAC and 230 VAC, as well as 25 HP at 460 and 575 VAC. It utilizes a solid-state Motor Logic overload relay class 10/20, accommodating thermal overload protection. The common control circuit operates at 120 VAC, and the device is equipped with screw clamp terminals for electrical connection. Its design allows the use of standard TeSys accessories to streamline inventory management. The product is UL listed and CSA certified, ensuring compliance with safety regulations.

This product is part of the Modicon M221 range, an offer of programmable logic controllers for hardwired architectures. This logic controller provides 8 discrete inputs and 8 relay outputs with 10bit input resolution, normally opened relay output. It is a Modicon logic controller with a rated supply voltage of 24V DC, an output voltage of 5V to 125V DC, 5V to 250V AC and an output current of 2A with sink or source input logic. This product requires minimal installation and offers tremendous versatility. Integrated connections are USB port with mini B USB 2.0 connector, non isolated serial link serial 1 with RJ45 connector and RS485 interface and non isolated serial link serial 2 with RJ45 connector and RS232/RS485 interface. It is a Modicon M221 controller with a network frequency of 50/60Hz, 256KB for internal variables RAM, user application and data RAM, a built-in flash memory of 256KB and a SD card memory capacity of 2GB. It is an IP20 rated product. Its dimensions are 70mm (Width) x 70mm (Depth) x 90mm (Height). It weighs 0.264kg. This product is certified by CE, IACS E10, RCM, ABS, LR, DNV-GL, CSA, EAC and CULus. It meets EN/IEC 60664-1, EN/IEC 61131-2 and EN/IEC 61010-2-201 standards. It supports DIN rail mount. Achieve benchmark performance while increasing profitability with the Modicon M221 through intuitive machine programming with SoMachine Basic, ready-to-use applications and function blocks

The MTZ2 12NA is a 3-pole switch disconnector designed for high current applications, featuring a drawout version for ease of maintenance. With a rated operational current of 1250A and a maximum operational voltage of 690VAC at 50/60Hz, it is suitable for protecting electrical systems against overloads, short circuits, and ground faults. This model has a rated short-circuit making capacity (Icm) of 88kA peak and a rated short-time withstand current (Icw) of 42kA rms for 1 second, complying with the AC-23A category. The dimensions of the device are 441mm in width, 439mm in height, and 403mm in depth. It requires a corresponding chassis for installation, which must be ordered separately, and can accommodate various optional functions and accessories. Compliance with international standards IEC/EN 60947-1 and IEC/EN 60947-3 ensures reliability and safety. Furthermore, the switch disconnector can be integrated into EcoStruxure architecture systems, aligning with modern smart grid applications.

The contact block is designed for quick replacement and configuration of push buttons and selector switches, ensuring operational safety with its IP20 protection index, which safeguards against unexpected contact with live circuits.Compatible with XACM and XACB pendant control stations, this block utilizes straightforward screw-clamp connections for integration into control circuits. It operates effectively within a temperature range of -25 to 70 °C, and withstands shocks of up to 100 gn as per IEC 60068-2-27.The mechanical durability is rated at 1,000,000 cycles, making it suitable for demanding applications. It supports a variety of power ratings, including up to 680 VA at 230 V AC-15. The block's terminals accommodate various wire sizes, ensuring versatile connectivity.For installation, the block is front-mounted and features a spring return operator type, making it suitable for control circuit applications. Its contact configuration comprises two normally open (2NO) contacts, facilitating efficient control operations.