SolaHD Ersatzteile für industrielle Automatisierung

Drive Isolation Transformers are specifically engineered for SCR (Silicon Control Rectifier) variable speed motor drive systems, serving to magnetically isolate the incoming line from the motor drive. These transformers are essential for adjusting the voltage to align with the requirements of the SCR Drive. The standard configurations utilized include delta primary and wye secondary, which are compatible with typical power sources used in three-phase rectifier circuits.With an input voltage range of 460-575 Vac and a KVA rating spanning from 7.5 to 440 kVA, these transformers support a variety of drive horsepower ratings from 5 to 400. The output voltage range is between 133-460 Vac, accommodating diverse operational needs. The windings are constructed from aluminum, and the temperature rise is rated at +150°C, ensuring reliability under demanding conditions.

The S4K4U-C 6 kVA and S4K6U-C 10 kVA Industrial On-Line UPS systems represent advanced solutions for ensuring power continuity in industrial applications. These units are designed with a double conversion topology that safeguards sensitive equipment against a variety of power disturbances.Encased in a slim 4U (7.0") or 6U (10.5") enclosure, these UPSs offer a capacity of 6000 VA/W or 10000 VA/W, catering to different load requirements. The internal batteries provide a typical back-up time of up to 13 minutes at full load for the 6 kVA model and 14 minutes for the 10 kVA variant, ensuring that critical operations remain uninterrupted.Operating within an input voltage range of 120/208 Vac, these systems can function effectively in environments with temperatures ranging from 0°C to +40°C. The output voltage is adjustable within the same 120/208 Vac range, making them versatile for various applications. With a low audible noise level of less than 55 dBA at a distance of 3.2 feet from the rear and under 50 dBA from the front and sides, they are suitable for use in noise-sensitive areas.

The SDU AC - A Series DIN Rail UPS System is engineered to provide effective power protection in a compact form factor. Designed to operate within a temperature range of 0°C to +50°C, it safeguards critical devices from power interruptions and damaging electrical impulses.With input voltage options of 120 Vac and 230 Vac, the system supports single-phase operation and is equipped with easy-to-wire screw terminations, making it suitable for computer-based control systems requiring battery backup. The SDU 500A model delivers a capacity of 500 VA/W with a typical backup time of 4 minutes at full load, while the SDU 850A model offers a capacity of 850 VA/W with a 2-minute backup duration.Both models feature an input voltage range of 120 V (+10%, -20%) or 230 V (+/- 15%) and provide output voltage options of 120 or 230 Vac in simulated sine wave form. The system operates at 50 or 60 Hz and is designed for mounting on DIN Rail TS35/7.5 or TS35/15, or can be chassis-mounted as needed. The audible noise level is maintained below 40 dBA at a distance of one meter from the surface, ensuring minimal disruption in sensitive environments.

The SBE Series encapsulated copper wound transformers are specifically constructed for industrial control applications, providing exceptional protection against moisture and contaminants due to their epoxy encapsulation. These transformers feature a variety of primary voltage options, including 120 x 240 Volt, 220 x 440 Volt, and 240 x 480 Volt, with secondary voltages of 24 Volt and 120 Volt. The design incorporates extra deep, molded terminal barriers to minimize electrical failure risks caused by arcing or frayed lead wires.With a temperature rise of +55°C, these transformers are capable of delivering continuous VA ratings ranging from 50 to 750, accommodating diverse industrial power requirements. The copper windings enhance conductivity and reliability, while the sturdy steel mounting plate ensures secure installation. This configuration makes the SBE Series particularly suitable for environments where durability and consistent performance are critical, aligning with the designation code E050TF.

The Automation Transformers are designed for applications requiring non-ventilated encapsulated transformers with power ratings ranging from 50 VA to 45 kVA. These transformers are suitable for use in hazardous locations and harsh industrial conditions.Featuring rugged NEMA 3R enclosures, they ensure protection against dust and moisture. This encapsulation also provides enhanced resistance to shock and vibration, making them ideal for demanding environments. They are UL Listed and meet the latest National Electrical Code standards for Class I, Division 2, Group A-D locations, provided they are installed in accordance with NEC 501.100(B).With options for 50 or 60 Hz operation and the flexibility of single or three-phase configurations, these transformers utilize aluminum windings, ensuring a reliable performance across various applications.

The S5KC Modular Series On-Line UPS is engineered for scalability, accommodating power capacities from 5 to 20 kVA. It can be fully configured, tested, and shipped according to specific requirements, with capabilities for upgrades in the field. Users can enhance the system to achieve higher VA ratings, with a maximum capacity of 20 kVA, extend backup times, or implement N+x parallel redundancy for a fault-tolerant power solution.This system utilizes intelligent power and battery modules, ensuring reliable performance. The input voltage options include xfmr-free configurations of 200/208/220/230/240 Vac for single-phase and 380/400/415 Vac for three-phase systems. Output voltages align with these inputs, providing versatility for various applications.Designed to operate within a temperature range of 0°C to +40°C, the UPS supports wide DC voltage ranges based on output loading. The S5KC series represents a comprehensive solution for uninterrupted power supply needs, suitable for diverse industrial applications.

The S5KC Modular Series On-Line UPS is engineered for scalability, accommodating capacities between 5 and 20 kVA. This system can be tailored to specific requirements, ensuring it is fully configured, tested, and delivered as needed. The UPS can be upgraded in the field to achieve higher VA ratings up to a maximum of 20 kVA, extend backup times, or incorporate N+x parallel redundancy, enabling a fault-tolerant arrangement of power modules and controls.Utilizing intelligent power and battery modules, this UPS supports various input and output configurations. The Xfmr-free input voltage options include 200/208/220/230/240 Vac for single-phase and 380/400/415 Vac for three-phase setups. Output voltage configurations also vary based on transformer specifications, with capabilities for dual inverter input and output voltage settings.Operating within a temperature range of 0°C to +40°C, the system maintains performance across diverse environments. The wide DC voltage range is dependent on output loading, ensuring flexibility in various applications.

The Automation Transformers, rated from 50 VA to 45 kVA, are specifically designed for operation in hazardous locations and challenging industrial settings. Their encapsulated design, coupled with NEMA 3R enclosures, ensures robust protection against dust and moisture, while also enhancing resistance to shock and vibration. These transformers are UL Listed and comply with the latest National Electrical Code for Class I, Division 2, Group A-D locations, provided they are installed according to NEC 501.100(B).With the capability to operate at either 50 or 60 Hz, these transformers can accommodate both single and three-phase configurations. The windings are constructed from aluminum, contributing to their efficiency and reliability in demanding applications.

The SBE Series encapsulated copper wound transformers are specifically designed for industrial control applications. These transformers feature epoxy encapsulation, which protects the core and coils from moisture, dirt, and other contaminants commonly found in industrial environments. The construction includes extra deep molded terminal barriers that help prevent electrical failures due to arcing or frayed lead wires. Available in multiple configurations, these transformers support primary voltages ranging from 120 x 240 volts up to 600 volts and secondary voltages of 24, 110, 115, or 120 volts. The units operate at frequencies of 50/60 Hz, with continuous VA ratings varying from 50 to 1000 VA, allowing for versatile application across a range of industrial settings. The rugged design ensures reliable performance, making the SBE Series particularly suitable for demanding conditions.

The STV100K Series is designed to deliver effective surge protection across various applications, including service entrances and branch panels. It features comprehensive all mode protection and includes LED and audible alarm indicators for monitoring operational status.With a fault current fusing capability of 100 kAIC, this device ensures enhanced safety through thermal fusing mechanisms. The operational specifications include an input voltage range of 120 to 480 Vac and support for both single-phase and three-phase configurations. Additionally, the device operates effectively in temperatures ranging from -40°C to +60°C.Noise attenuation is rated at a maximum of 40 dB, and the device is compatible with frequencies of 47-63 Hz. It can be mounted in either parallel or flange configurations, making it versatile for various installation requirements.

The S4K2U-C and S4K2U-5C are industrial-grade on-line uninterruptible power supplies (UPS) providing seamless power support through an online design that eliminates transfer time when switching from external to internal power. This feature ensures that critical loads remain operational during utility power failures.These units are available in capacities of 700VA to 3000VA at 120 Vac and 1000VA to 3000VA at 230 Vac. The compact 2U form factor allows for flexible installation in rack or tower configurations. The UPS systems demonstrate a high power factor along with extended battery life and reliability, contributing to a lower cost of ownership.Typical back-up times vary based on load, with the 120 Vac configurations offering a maximum of 11 minutes at full load for the 700VA model, while the 230 Vac models provide up to 6 minutes at full load for the 1000VA variant. Operating within an input voltage range of 60-140 Vac and featuring a user-configurable output voltage of 110/115/120/127 Vac ±3%, these UPS systems are designed for robust performance in temperatures ranging from 0°C to +40°C.

The Low Power DIN Rail Series Power Supplies are designed to deliver reliable power in industrial environments, with output voltage options ranging from 5 to 48 Vdc and a maximum output power of 100 Watts. These compact units, mounted on DIN rails, ensure efficient operation within an input voltage range of 85-264 Vac and 90-375 Vdc.One significant feature of this series is the PowerBoost overload circuitry, which allows for the startup of industrial loads that typically cause standard power supplies to shut down. The overload capacity varies across models, with the SDP-T capable of handling output voltages between 30 Vdc and 33 Vdc, while the SDP-LT and SDP-RT models have slightly different thresholds for auto recovery.Operating within a temperature range of -10°C to +70°C at full power, these power supplies are UL Recognized Components suitable for hazardous locations, classified as Class I, Division 2, Groups A, B, C, and D. A green LED indicator provides status feedback, ensuring ease of monitoring during operation. The units support single-phase operation and can be mounted on standard DIN TS35/7.5 or TS35/15 rails.

The SBE Series encapsulated copper wound transformers are specifically designed for industrial control applications. These transformers are epoxy encapsulated, providing protection for the cores and coils against moisture, dirt, and various industrial contaminants. Featuring extra deep molded terminal barriers, the design minimizes the risk of electrical failures caused by arcing or frayed lead wires. The rugged construction ensures reliability, making this transformer suitable for challenging industrial environments. With a variety of configurations, this model supports primary voltages ranging from 120 x 240 volts to 600 volts, and secondary voltages from 24 volts to 120 volts. The temperature rise is capped at +55°C, and windings are constructed using copper. The transformers can be mounted on a steel mounting plate, ensuring stability and durability.

The Low Temperature Rise Ventilated Transformers, designated as PN E5HB300S, incorporate a +220°C insulation system that allows for a temperature rise of only +80°C or +115°C at full nameplate load. This innovative design results in operating losses that are 13-21 percent lower compared to traditional +150°C rise transformers. The enhanced thermal management not only improves operational efficiency but also increases reliability, providing a +35°C thermal reserve on +115°C rise units and a +70°C reserve on +80°C rise units. These transformers are capable of short-term overloads of 15-30 percent when operated at +150°C rise. They are available in various configurations, including single-phase options with a primary voltage of 240 x 480 Volts and a secondary voltage of 120/240 Volts, as well as three-phase configurations with primary voltages of 480 ∆ and secondary voltages ranging from 208Y/120 to 240 ∆. The transformer capacity options include 15, 25, 37.5, 50, 75, 100 kVA for single-phase and 15, 30, 45, 75, 112.5, 150, 225, and 300 kVA for three-phase models, all designed to operate at a frequency of 60 Hz with aluminum windings.

The HZ Series Industrial Control Transformers are specifically engineered for scenarios demanding external transformer placement outside the control panel to mitigate heat and cost concerns. This model is encapsulated and utilizes copper windings, suitable for various industrial uses. The transformer includes a UL Class +180°C insulation system, accommodating a temperature rise of +80°C at full load.Standard configurations are UL Listed with NEMA Type 3R ratings, ensuring rainproof capabilities. Additionally, custom options are available to meet NEMA Type 4, 4X, and 12 specifications. With a primary voltage range from 220 to 575 volts and secondary voltage options between 110 and 240 volts, this transformer caters to diverse operational needs.

The SBE Series encapsulated copper wound transformers are designed for industrial applications, featuring epoxy encapsulation that safeguards the cores and coils from moisture, dirt, and other contaminants. The transformers are equipped with deep, molded terminal barriers which minimize the risk of electrical failures due to arcing or frayed lead wires.These transformers support a range of primary voltages including 120 x 240 Volt, 220 x 440 Volt, and 240 x 480 Volt, with secondary voltages of 24, 110, and 120 volts, catering to various operational needs. With a KVA rating that spans from 50 to 750 and a temperature rise limit of +55°C, the SBE transformers are engineered to perform reliably in demanding environments. The copper windings and sturdy steel mounting plates further enhance their durability, making them suitable for a wide array of industrial applications.

The ICE International Series transformers are designed with versatility in mind, featuring a primary voltage range that accommodates various global standards. Specifically, the unit supports options between 240 to 600 volts for the primary side and 120 to 240 volts for the secondary side, making it suitable for a wide array of applications. With a continuous VA rating of 2000, these transformers are capable of handling significant electrical loads. Notably, they have a temperature rise of +80°C, ensuring reliable performance under demanding conditions. The copper windings enhance conductivity and efficiency, while the encapsulated design provides added protection. These transformers are CE marked and comply with cULus standards, making them ideal for OEM export equipment. Their IP20 touchproof terminations ensure safety in various environments. The flexibility of the standardized primary coil supports multiple worldwide voltage combinations, further increasing their applicability.

The SBE Series encapsulated copper wound transformers are specifically engineered for industrial control applications, featuring epoxy encapsulation that safeguards the cores and coils from moisture, dirt, and various industrial contaminants. This encapsulation enhances durability in challenging environments.With a selection of primary voltage configurations, including 120 x 240 volts and 220 x 440 volts, and secondary outputs of 24, 110, and 115 volts, these transformers cater to diverse operational requirements. The transformers are rated for continuous VA from 50 to 1000, accommodating different power demands effectively.Furthermore, the design includes extra deep, molded terminal barriers that significantly reduce the risk of electrical failure due to arcing or frayed lead wires, making them ideal for industrial settings. The rugged construction and proven reliability of the SBE design, along with a temperature rise rating of +55°C, ensure long-lasting performance in various applications.

The S4K2U-C and S4K2U-5C models are industrial on-line UPS systems, utilizing a double conversion design to ensure zero transfer time from external to internal power sources. This feature guarantees uninterrupted support for critical loads during utility power failures. Available in a slim 2U format, these units can be configured as rack or tower systems.They offer a higher power factor and longer battery life, contributing to enhanced reliability and a reduced cost of ownership. With capacities of 700/630 VA to 3000/2700 VA at 120 Vac, and 1000/900 VA to 3000/2700 VA at 230 Vac, these UPS systems are equipped to handle various load demands.The typical back-up times vary based on load, with specific values such as 11 minutes at full load for the 700 VA model and up to 3 minutes for the 3000 VA model at both voltage ratings. The operating temperature range spans from 0°C to +40°C, ensuring functionality in diverse environments. The output voltage can be user-configured within a range of 110/115/120/127 Vac ±3% to suit different applications.

The General Purpose Ventilated Transformers, designated as PN E5HB150S, are engineered for versatility in various electrical applications. These transformers feature a dry type construction and are classified as isolation transformers, capable of stepping up or down voltage as required. Available configurations include single-phase and three-phase models suitable for both indoor and outdoor use, with power ratings ranging from 15 kVA to 500 kVA.Specific configurations include single-phase options with primary voltages of 240 x 480 Volts and secondary outputs of 120/240 Volts, as well as multiple three-phase arrangements. Notable three-phase varieties operate at 480 Volt Δ primary with secondary outputs including configurations of 208/120 Volts and 480Y/277 Volts, among others. The temperature rise is rated at +150°C and the windings can be constructed from either aluminum or copper, accommodating various installation conditions and load requirements.