Produkt-Suche

The limit switch belongs to the XC Standard series and serves to convert mechanical movement into an electrical control signal. It is equipped with 1 NC and 1 NO snap-action contacts, which ensure reliable operation with positive opening functionality. Actuation occurs through a 30° cam, allowing for lateral approach from two directions.This model features a fixed body made of Zamak and measures 30mm width, 16mm depth, and 50mm height. The operating head moves in a linear fashion, and the switch includes a removable cable connector with a 5m cable for electrical connections. It is rated for IP66, IP67, IP68, and has an impact protection rating of IK06.With a rated operational current of 1.5A at 240V AC and 0.1A at 250V AC, the limit switch is built for durability, boasting a mechanical lifespan of approximately 10 million cycles and an electrical lifespan of 5 million cycles. It is suitable for various industrial applications including packaging, materials handling, and food and beverage processing. Additionally, this device adheres to multiple standards, including UL 508, EN/IEC 60947-5-1, and CSA C22.2 No 14.

The M23 coupler connector CA-17F1N8A9504 is engineered for secure connections in various applications. This unit features a socket-type contact with a crimp connection, accommodating cable diameters ranging from 10 mm to 14.5 mm. With 17 positions, it supports standard direction of rotation and is shielded to enhance performance in electrically noisy environments.Constructed from high-quality materials, including a PA 6.6 insulating body and copper zinc alloy for the turned parts, the connector ensures robust durability. It meets RoHS II standards without exemption 6c (Pb ) and is classified with a degree of protection IP67, making it suitable for use in harsh conditions.Operationally, this connector can handle a rated current of 8 A and a rated voltage of 48 V AC, with a rated surge voltage of 1.5 kV. Its ambient temperature range spans from -40 °C to 125 °C, making it versatile for various industrial applications. The connector design is straight with no Pg screw connection, and the locking type is compatible with both standard and SPEEDCON interlock systems. This product is identified under the designation code CA-17F1N8A9504.

The D fuse-system represents the initial generation of screw fuse systems adhering to the German DIN standard, which remains prevalent in numerous installations. These fuse-bases are specifically applied in low voltage distribution units, enabling personnel without specialized training to replace fuse-links safely. This product range includes sizes NDZ, DII, DIII, DIV, and DV. The D fuse-links gG offer protection for cables and power lines by effectively limiting and interrupting excessive overcurrents and short circuit currents, up to their specified nominal breaking capacity. Additionally, D fuse-links gG safeguard equipment and installations from the dynamic impacts associated with high short circuit currents. Operating at an AC voltage of 500 VAC and a DC voltage of 500 VDC, these fuse-bases comply with DIN VDE 0636-301 standards and are CE certified. The product supports a range of applications, including house incoming units, meter distribution units, distribution cabinets, installation cabinets, and fuse boxes, with ampere ratings between 25 and 63 A. For further details regarding lead-free compliance, consultation with Technical Services is advised.

The OTS series of fuses are designed for general purpose applications, providing cost-effective protection for feeder and branch circuits that serve lighting, heating, and other non-motor loads. With a rated voltage of 600V AC and 300V DC, this fuse has an ampere rating of 1A and is classified as Class K5.This fast-acting fuse can safely interrupt available short circuit currents up to 50,000 amperes, ensuring robust performance in critical applications. It features a clip mounting style and is constructed with copper terminal materials, utilizing ferrule connection types for reliable integration. The insulating body is made from paper, contributing to its lightweight design, which is 0.11 lb and measures 5 inches in length with a diameter of 0.81 inches.It is important to note that OTS fuses are not rejection fuses; therefore, care must be taken to ensure that replacement fuses maintain the required interrupting ratings.

This Multi9 C60BPR is a low voltage miniature circuit breaker (MCB). It is a 3P circuit breaker with 3 protected poles, 30A rated current and C tripping curve. The rated short circuit breaking capacity goes up to 10kA at 415VAC conforming to EN/IEC 60947-2 standard and 10kA at 415VAC conforming to EN/IEC 60947-2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. It has been designed to offer enhanced protection by preventing, protecting people and equipment from electrical threats. This product protects from short circuit, earth leakage and overload. This product is dedicated for original equipment manufacturers (OEM) and control panel builders. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 240VAC. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 6kV. The product can be clipped on a DIN rail. Its width is 6 pitches of 9mm. Pollution degree is 3. The product colour is light grey (RAL7035). The dimensions are (W) 54mm x (H) 127mm x (D) 72mm. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. The operating temperature is -30°C to 70°C. The storage temperature is -40°C to 80°C.

The MasterPact MTZ2 12NA is a 4-pole fixed switch disconnector designed for distribution applications. With a rated current of 1250A, this device operates at a maximum voltage of 690VAC within the 50/60Hz frequency range. Its rated short-circuit making capacity (Icm) reaches 88kA peak, ensuring robust protection against short circuits. The device is compliant with international standards such as IEC/EN 60947-1 and IEC/EN 60947-3.Measuring 537mm in width, 352mm in height, and 300mm in depth, the MasterPact MTZ2 is engineered for ease of installation in fixed configurations. It supports a variety of optional functions and accessories, enhancing its versatility in electrical systems. The rated short-time withstand current (Icw) is specified at 42kA for a duration of 1 second, further contributing to its protective capabilities.Additionally, the switch disconnector features a connection pitch of 115mm and includes a control type push-button for operational convenience. It is built to endure up to 10,000 electrical cycles under the AC-23A category and up to 6,000 cycles under AC-3 conditions, demonstrating significant operational durability. The device also supports isolation, making it suitable for various industrial environments.

The MasterPact MTZ2 08HA is a fixed switch disconnector featuring four poles designed for distribution applications. With a rated current of 800A, it operates effectively at a maximum voltage of 690VAC across both 50Hz and 60Hz networks. This unit achieves a rated short-circuit making capacity (Icm) of 145kA peak, ensuring robust performance under fault conditions.Additionally, it includes a rated short-time withstand current (Icw) of 66kA for 1 second, enhancing its reliability in electrical systems. The dimensions of this switch disconnector are 537mm in width, 352mm in height, and 300mm in depth. Compliance with international standards such as IEC/EN 60947-1 and IEC/EN 60947-3 ensures its suitability for various applications.As part of the MasterPact series, this model integrates advanced digital technologies for improved functionality and can be seamlessly integrated within the EcoStruxure architecture system. Its construction is also notable for its environmental compliance, making it a part of the Schneider global environmental data program.

The Device Connector Front Mounting is designed for M17 configurations and incorporates a standard and SPEEDCON interlock. It features a total of 9 positions, configured as 5+3+PE. The connector utilizes a socket contact type and includes a shielded design for enhanced performance.Flange dimensions measure 25.75 mm x 25.75 mm, with a mounting method that involves a square flange utilizing four mounting holes of Ø 3.2 mm. This connector offers a high degree of protection rated at IP67, ensuring reliable operation even in harsh environments. The connection employs a crimp method, and the series is designated as ST.Notably, the connector operates effectively within a temperature range of -40 °C to 125 °C and can function at altitudes up to 2000 m. The nominal current rating is 3.6 A and the nominal voltage is 60 V, accompanied by an overvoltage category of III and a rated surge voltage of 1.5 kV. The maximum permissible humidity for storage and transport is between 50% and 65%. Please note that the connectors should not be plugged in or disconnected under load to prevent damage.This product is crafted in Germany, under item number 1620459, and is made to order, thus non-returnable. The designation code for this connector is ST-8ES1N8AWK00S.

The FLK 50-PA/EZ-DR/KS/2500/YOC is a cast front adapter equipped with a 25.0 m round cable and a 50-position socket strip, both of which are injection-molded on either side. This configuration is specifically intended for the connection of Yokogawa ProSafe controllers.With a maximum operating voltage of ≤ 30 V DC and a current capacity of ≤ 500 mA per path, this adapter is suited for various operational environments. The cable is constructed from shielded round cable, featuring a conductor made of tin-plated copper litz wires, and is compliant with IEC 60603-13 standards. The outer sheath, made from semi-rigid PVC, is gray in color and has a diameter of approximately 11.00 mm.Notably, the adapter has a minimum bending radius of 114 mm for fixed installations and 205 mm for flexible installations, accommodating diverse installation scenarios. It operates effectively within an ambient temperature range of -40 °C to 70 °C in fixed installations and -10 °C to 70 °C in flexible settings. The product is designed to meet the UKCA compliance standards.For optimal performance, users should adhere to the specifications outlined in the installation directive and observe the safety instructions of any third-party products used in conjunction with this adapter. The designation code for this product is FLK 50-PA/EZ-DR/KS/2500/YOC.

The TeSys D contactors are designed for seamless integration into control systems, catering to a wide range of applications. They are available in multiple ratings, supporting inductive motor loads up to 150 full-load amps and resistive loads up to 200 amps.This particular 4 pole IEC contactor is suitable for mounting on DIN rail or directly on a panel. It features four normally open power contacts with an 80A resistive load rating. The contactor is equipped with a 240 VAC 50/60 Hz coil and includes one normally open and one normally closed auxiliary contact as standard.The contactor's dimensions are 4.80 inches in height, 2.76 inches in width, and 4.72 inches in depth. It weighs approximately 2.54 lbs. The contactor is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, and it meets the RoHS/REACh requirements, making it a Green Premium product.

The safety switch model XCSPA is equipped with a key-operated turret head for secure operation, making it suitable for guard doors. Its plastic construction ensures durability, while the IP67 rating signifies resistance to dust and water, allowing operation in harsh environments.When installed according to relevant standards, this switch meets category 4 performance level PL e and SIL 3 safety levels, ensuring reliable 'door-open machine stop' control. The switch features 2 normally closed and 1 normally open contacts, utilizing a snap action mechanism for prompt response.The switch operates effectively within a temperature range of -25 to 70 °C and is rated for a maximum actuation speed of 0.5 m/s. With a mechanical durability of up to 1,000,000 cycles, it provides reliable long-term operation. The dimensions include a height of 94 mm, width of 30 mm, and depth of 30 mm, with a net weight of 0.11 kg.Compliance with multiple standards such as EN/IEC 60947-5-1 and UL 508 underscores its safety and performance capabilities. The conventional enclosed thermal current is rated at 6 A, while the positive opening minimum force is 15 N, ensuring operational integrity.

The HDSCS protection caps offer an essential solution for safeguarding the connector interface when the two halves are not connected. These caps are compatible with various receptacle housing configurations, specifically designed to accommodate 2 and 3 positions. With an operating temperature range of -40 to 140 °C (-40 to 284 °F), they ensure reliable performance in diverse environments.Constructed from PBT GF, these caps feature a black color and a 180-degree cable exit angle, providing flexibility in installation. The product adheres to industry standards, including a UL flammability rating of UL 94V-0, ensuring safety and compliance. Packaged in quantities of 1000, these caps are an efficient choice for bulk applications.

The modular tower light features a green LED unit with a steady illumination, intended for integration with a base to form a complete lighting solution. It operates at a supply voltage of 24V AC/DC and has a mounting diameter of 60mm, making it suitable for various applications, including automotive, packaging machinery, and machine tools.Constructed from impact-resistant polycarbonate, this unit is compliant with UL 94 standards and offers an IP65 rating, ensuring resistance to dust, water, and vibration. The product functions effectively within an ambient temperature range of -25°C to 50°C and demonstrates a maximum power dissipation of 2.5W with a current consumption of up to 50mA.As a component of the Harmony XVU range, this modular tower light is designed for customer assembly, allowing up to five units to be connected, or four with a buzzer. The product is also mercury-free and adheres to environmental sustainability standards, contributing to a green premium offer.

The AF30-30-00-11 is a robust 3-pole IEC or UL contactor designed for managing large control voltage variations. With a wide voltage range of 24-60 V 50/60 Hz and 20-60 V DC, it ensures reliable operation even in unstable networks.This contactor is equipped with surge protection, offering a compact solution for managing power circuits up to 50 A. It has a block type design, allowing easy extension with add-on auxiliary contact blocks and a wide range of accessories.

The XCSE Key Operated Safety Switch is constructed with a durable red coated rectangular Zamak body, featuring two Pg 13.5 cable gland entries for adaptable installation. It includes three normally closed main contacts, actuated by a key, providing status indications when the key is inserted. Additionally, the switch incorporates one normally open and one normally closed auxiliary contact, activated by the solenoid, with states indicated when the solenoid is de-energized. The device has a B10D reliability rating of 5,000,000, ensuring longevity.Designed to perform under demanding conditions, the switch achieves an IP67 rating, making it suitable for harsh environments. Compliance with various standards such as EN/ISO 14119 and EN/IEC 60947-5-1, among others, guarantees its reliability and safety. When correctly connected to an appropriate safety control unit, it meets Category 4 and Performance Level PL e, as well as SIL 3 criteria in accordance with EN/ISO 13849-1 and EN/IEC 61508.Operational characteristics include a minimum actuation speed of 0.01 m/s and a maximum of 0.5 m/s, with a mechanical durability of 1,000,000 cycles. The safety switch operates within an ambient temperature range of -25 to 40 °C and can withstand shock and vibration as per IEC standards. It is equipped with overvoltage protection and a supply frequency of 50/60 Hz, making it versatile for various industrial applications.

The photoelectric receiver XUB is designed for use in demanding environments, with a robust PBT case that withstands high temperatures and harsh conditions. It operates in a range from -25°C to +55°C, ensuring reliability in extreme temperatures. This device features an infrared thru-beam emission and a nominal sensing distance of 15 m, requiring a compatible transmitter for optimal performance. With its cylindrical M18 design and a diameter of 18 mm, this receiver can be easily mounted on surfaces or brackets using its outer thread and twin nuts. The PMMA lens provides scratch resistance, enhancing the durability of the sensor. A single yellow LED indicates the output state, enabling straightforward status monitoring. This unit is equipped with a standard M12 connector, ensuring compatibility with existing cabling systems. Additional features include double insulation for increased protection against electrical shocks, and compliance with CSA, UL, and CE certifications. The receiver is also designed with a maximum delay response of 1 ms and can handle switching frequencies of up to 500 Hz, making it suitable for various industrial applications. The model adheres to environmental standards such as RoHS and is mercury-free, contributing to sustainable usage. For further details on environmental impact, refer to the provided disclosures.

The manual switch is designed for a variety of applications, including industrial, commercial, and residential settings. It provides manual on/off control for small motors, suitable for both single and three-phase AC motors. This non-reversing switch is toggle operated and has a maximum operational voltage of 600 VAC and 250 VDC. Rated for 2 HP at 115 VAC, 2 HP at 230 VAC, 3 HP at 460 VAC, and 3 HP at 600 VAC in single-phase configurations, it also accommodates 1 HP at 90 VDC, 2 HP at 115 VDC, and 1.5 HP at 230 VDC. The switch maintains a continuous rating of 30A. The electrical connection utilizes screw clamp terminals that accept 14 to 10 AWG copper wire. This device is housed within a NEMA 1 oversized general-purpose enclosure, which is surface mounted. The enclosure includes knockouts of 0.5 and 0.75 inches on the top and bottom and measures 4.25 inches in height, 2.88 inches in width, and 2.75 inches in depth. It has no pilot light indicator and is UL Listed and CSA certified, ensuring compliance with safety standards.

This electronic control unit facilitates the transition from a mechanical time switch, providing advanced scheduling capabilities. With a voltage range of 120-277 VAC and a robust SPST switch type, it supports up to 28 events for precise timing. The device is equipped with battery backup, ensuring functionality during power outages, and features automatic daylight saving adjustments.Designed for indoor applications, the enclosure is classified as type 1 metal, suitable for a range of settings including lighting and machinery control. The product dimensions are 7.875 in (200 mm) in height, 5.125 in (130.2 mm) in width, and 3.4375 in (87.3 mm) in depth, making it compact yet functional.Operating effectively within a temperature range of -40°C to 40°F (-40°F to 104°F), it allows for a minimum on/off time of 1 minute and offers flexibility with a maximum on/off time of indefinite. The device's wiring accommodates a minimum wire size of #14 AWG and a maximum of #8 AWG, ensuring compatibility with various setups.

The Type S non-reversing magnetic contactor is specifically engineered for switching various loads, including heating elements, capacitors, transformers, and electric motors, where separate overload protection is necessary. This model, classified as NEMA Size 00, supports a current rating of 9 amperes and is capable of managing up to 100 kA of short-circuit current when properly protected by an appropriate circuit breaker or fuse.In terms of operational capabilities, this contactor can handle 1.5 HP at both 200 and 230 VAC, and 2 HP at 460 and 575 VAC. The device operates on a 120 VAC control circuit at a frequency of 50/60 Hz, wired for separate control. The physical dimensions of this open device are 4.34 inches in height, 3.22 inches in width, and 4.22 inches in depth. Notably, it is UL listed and CSA certified, ensuring compliance with industry standards.Accessories compatible with Type S contactors are widely available, enhancing their functionality. The contactor's electrical connection is facilitated through screw clamp terminals and features a design that is not enclosed, allowing for versatile installation options.

The SIMATIC S7-300 is a robust temperature control module designed to provide precise temperature regulation. Equipped with 4 channels, this module offers both step and pulse operation, making it an ideal choice for applications requiring fine-tuned temperature adjustments.The FM355S model is specifically designed to cater to the needs of industries demanding high precision in temperature control. It features 4 AI (Analog Input), 8 DI (Digital Input), and 8 DO (Digital Output) channels, ensuring comprehensive data input and output capabilities.This module comes with a multi-language configuration package, including manuals and getting started guides in German, English, French, and Italian. The package is conveniently provided on a CD-ROM, making it easily accessible for users worldwide.