Produkt-Suche

The MLA Automotive Series utilizes advanced multilayer fabrication technology for transient voltage surge suppression. These devices effectively mitigate various transient events, adhering to standards such as IEC 61000-4-2, integral for ensuring Electromagnetic Compliance (EMC). Typically employed to protect integrated circuits and other components within circuit boards, this series supports a broad range of applications across power supply, control, and signal lines. Manufactured from semiconducting ceramics, the devices feature a leadless, surface mount package that is compatible with contemporary reflow and wave soldering processes. Notably, the MLA Automotive Series operates over a wider temperature range compared to traditional Zener diodes and occupies a significantly smaller footprint than plastic-housed alternatives. Its specifications include a maximum rated DC voltage of 18V, a maximum clamp voltage of 50V, and a typical capacitance of 120pF, making it suitable for diverse applications.

The ZB5AW0B45 light block is designed for compatibility with illuminated push button or selector switch units, enabling straightforward installation and replacement through an assembly of clips and screw-clamp connections. The visual distinction of signaling units is achieved through its integral LED illumination. With an IP20 protection index, this component safeguards operators from unintentional contact with live circuits. The product features screw clamp terminals accommodating cable sizes up to 2 x 1.5 mm² with cable ends, and down to 1 x 0.22 mm² without. The contact configuration includes 1 Normally Open (NO) and 1 Normally Closed (NC) contact, providing versatility in signaling applications. Operationally, the light block supports a voltage range of 19.2-30 V DC or 21.6-26.4 V AC and has a rated operational current of 3 A at 240 V. Its electrical durability is rated for 1,000,000 cycles under various conditions, ensuring long-term reliability in demanding environments.

The SE-330 is designed for comprehensive monitoring of neutral-grounding resistor systems, ensuring compliance with Rule 10-302 of the 2018 Canadian Electrical Code Part I. This relay continuously measures neutral current, neutral-to-ground voltage, and neutral-to-ground resistance, providing crucial oversight of the neutral-to-ground path.An intact neutral-grounding resistor (NGR) is essential for proper ground-fault protection; any interruption can lead to a false sense of system integrity. Specifically, if the NGR is open, the ground-fault protection may become inoperative, while a shorted NGR could result in abnormally high ground-fault current levels.Suitable for use with both low- and medium-voltage transformers and generators with varying resistance grounding, the SE-330 serves applications across various industries, including processing, manufacturing, chemical, pulp and paper, petroleum, and water treatment facilities. For high-voltage requirements, the SE-330HV is recommended, and for compliance with Australian standard AS/NZS 2081.3:2002, the SE-330AU variant is available.

The Compact Emergency Stop CE3T-10R-02 is a compact, twist release emergency stop that ensures the safety of your operations. It features a maintained mushroom design with a diameter of 30mm and a color of red. This device is non-illuminated, making it easy to use in any environment. The CE3T-10R-02 is designed for 24V applications and can handle voltages up to 300V.This emergency stop is equipped with a 2NC (Normally Closed) output, which means that it will only activate when the device is in its normal state. It also has a 0 NO (Normally Open) output, which means that it will not be active unless the device is activated. The CE3T-10R-02 also features two NC (Normally Closed) outputs, which can be used to trigger additional safety measures or alarms.

The LC1D65A6CD is designed for motor control applications, accommodating operational capabilities of up to 65A at 690V AC. This contactor features three normally open (3NO) poles and is suitable for various utilization categories, including AC-3 and AC-1. The control circuit operates at a voltage of 36V DC, equipped with a built-in transient suppressor for enhanced reliability. With a compact width of 55mm, it can be mounted on a DIN rail or fixed using screws. The contactor supports high operational rates of up to 3600 cycles per hour, and it is rated for use in environments with temperatures ranging from -40°C to 60°C, or up to 70°C with derating. It is certified under multiple standards, ensuring compliance with international safety and quality regulations, including IEC and UL. Additional features include built-in auxiliary contacts comprising one normally open and one normally closed, configured to meet IEC standards. Power connections utilize EverLink BTR screw connectors, while control connections are made via spring terminals, providing secure and efficient connectivity. The device is rated for a mechanical durability of 10 million cycles and electrical durability of up to 1.45 million cycles at specified loads.

The Temperature Monitoring Relay is configured for monitoring PT100 sensors, specifically designed to measure under-temperature conditions. It operates within a temperature range of 0 to +200 °C and supports a control voltage of 24-240 V AC/DC. With a compact width of 22.5 mm, this relay features one normally open contact and one change-over contact, facilitating versatile applications in temperature control systems. Key specifications include a depth of 91 mm and a height of 102 mm, ensuring a streamlined fit in control panels. The device utilizes a screw connection for reliable electric connections. Notably, the relay does not support external reset capabilities or error registration but allows for the connection of one measuring circuit. The relay has been phased out, with 3RS2600-1BW30 recommended as the preferred successor. This product is identified by the designation code TMP MON REL, PT100, 0 TO 200C, 120VAC, SC, ensuring ease of reference in technical documentation.

The reversing contactor is designed for motor control applications, rated at 6A AC-3 with an operational voltage of up to 690V. It features a 120V AC coil compatible with 50/60Hz operation and includes a mechanical interlock along with two normally closed auxiliary contacts. Measuring 90 mm in width, 57 mm in depth, and 58 mm in height, this compact unit is suitable for DIN-rail mounting and utilizes screw clamp terminals for secure connections. The device operates effectively in ambient temperatures ranging from -25 to 50 °C, ensuring reliable performance in various conditions. This contactor complies with multiple international standards, including IEC, UL, and CSA, and is certified as a Green Premium product, indicating its sustainability. The mechanical robustness allows it to withstand shocks of 10 Gn on the X axis and 15 Gn on the Y and Z axes when closed, adhering to IEC 60068-2-27 standards. With a maximum operating rate of 3600 cycles per hour and a mechanical durability of 5 million cycles, it is engineered for longevity in demanding applications. The reversing contactor can be paired with auxiliary contact blocks and thermal relays for enhanced functionality. The product is designated with the code LC2K0601G7, ensuring easy identification and compliance with industry requirements.

The EV-CC-AC1-M3-CBC-SER-HS charging controller is specifically designed for the efficient charging of electric vehicles within 3-phase AC networks, adhering to the IEC 61851-1 standard, Mode 3. This unit is equipped with comprehensive charging functionalities, configuration capabilities, and a locking controller, all housed within a compact design suitable for DIN rail mounting.It operates in a stand-alone mode and supports a supply voltage range from 100 V AC to 240 V AC, with a nominal voltage of 230 V. The controller features a maximum current consumption of 40 mA and a low power consumption, ensuring energy efficiency during operation. Notably, it includes an integrated release function for the locking actuator, allowing for safe disconnection of the infrastructure plug in the event of a mains failure.With a robust design, the controller is protected to IP20 standards and can function in ambient temperatures ranging from -35 °C to 70 °C, ensuring reliability in various environments. It boasts an RS-485 interface for communication, facilitating integration into existing systems and supporting Modbus/RTU protocols for data exchange. This unit's designation code is EV-CC-AC1-M3-CBC-SER-HS, which identifies it within the CHARX control basic product family, ensuring compatibility with a range of electric vehicle charging applications.

The EMM 3-24DC/500AC-160-EXM-IFS is an electronic machine management system that operates with an external current transformer rated for 160 A. This device enables precise measurement of energy and active power for motors and various three-phase loads. It features adjustable switching and signaling thresholds, allowing for custom configurations to suit specific applications.With a rated control circuit supply voltage of 24 V DC and a range from 19.2 V DC to 30 V DC, the system supports a maximum power dissipation of 2.5 W under nominal conditions. It operates with an accuracy of 0.5%, facilitating reliable monitoring and control. The Designation Code for this product is EMM 3-24DC/500AC-160-EXM-IFS.The device can handle a power range from 350 W to 111 kW at 400 V AC, with a current range of 0.5 A to 160 A. It is equipped with four inputs and four outputs, providing flexibility in configuration. The outputs operate at a nominal voltage of 24 V DC, with a continuous load current of 500 mA.Constructed for durability, the device has an ambient temperature operating range from -25 °C to 70 °C and is compliant with UKCA standards. The degree of protection is rated at IP20, making it suitable for various industrial environments. The system can be mounted on DIN rails and is designed for easy installation with connections via a D-SUB socket strip.

The NH fuse-link system is categorized as a plug-in fuse system, comprising a fuse-base, which may include terminal covers and phase barriers, along with a fuse-link equipped with blade contacts and a replacement device (LV HRC fuse puller). Due to the system's design, interchangeability of rated current cannot be assured, and handling should be performed by qualified professionals.These aM NH fuse-links offer partial-range breaking capacity, making them suitable for protecting motor circuits due to their strong current-limiting characteristics and minimal power losses. They can interrupt currents from 6.3 times the rated current up to their maximum breaking capacity, making them ideal for short-circuit protection. It is essential to pair them with additional switchgear to guard against overloads. The rated current of these fuse-links can match the nominal current of the motor.

The double-ended cordsets M415-M412-3B-329-PS72N1-006 facilitate continuous and secure transmission of signals, data, and power across multiple applications. These cordsets feature a PUR shielded violet cable with a length of 0.6 meters, suitable for drag chain compatibility. Connection options include an M12x1 female connector with a straight configuration and 5 pins in a B-code, alongside an M12x1 male connector also straight with 2 pins in a B-code. The interface supports Profibus for efficient communication. With a temperature range of -20 to 70 °C for fixed routing and -20 to 50 °C for flexible routing, these cordsets maintain operational integrity under various conditions. The operating voltage is rated at 60 VDC / 60 VAC, and the cordsets achieve an IP67 protection rating, ensuring resistance to dust and water ingress. Compliance with standards such as CE, cULus, EAC, and WEEE confirms their reliability and safety in industrial applications.

The D-SUB contact insert, designated as CUC-DSI-Y1STZ-A/DSLSA15:50, is specifically constructed for PCB mounting applications. This model is characterized by its socket-type contact configuration and includes 15 signal contacts. The insert is designed for angled installation and is secured using 4-40 UNC threads along with solder pins, compatible with the VS-15-... panel mounting frame.Manufactured in Germany, this component adheres to the overvoltage category III, with a rated voltage of 125 V and a rated current of 5 A. The product's dimensions are 39.3 mm in width, 17.3 mm in height, and 21.6 mm in length. Its housing is made of metal, while the contacts are composed of a copper alloy with a hard gold plating over nickel, ensuring reliable connectivity. The contact carrier is made from polyester GF, and the component meets the flammability rating of V0 according to UL 94.

The GAF1250-10-11 Series Contactor is specifically engineered for DC-1 applications, featuring a three-pole configuration capable of series connection at a maximum voltage of 1000 VDC. This design enables versatility across a variety of operational environments. The contactor supports a broad control voltage range from 250 to 500 V for both AC and DC, facilitating its use in diverse power supply scenarios. With an operational current rating of up to 1250 A at 1000 VDC and thermal current ratings compliant with IEC 60947-4-1, this contactor ensures reliable performance even under challenging conditions. The mechanical durability is rated at 0.5 million cycles, with a maximum switching frequency of 300 cycles per hour, providing longevity and dependability in demanding applications. Additionally, the contactor's design adheres to various standards, including IEC 60529, offering protection ratings of IP20 for coil terminals and IP00 for main terminals. Its operational temperature range spans from -40 °C to +80 °C, ensuring functionality in extreme conditions. This contactor is suitable for installations requiring robust switching capabilities and can be integrated into various control systems, making it a vital component in industrial automation.

Circular DIN connectors are available in 2-7 cavity arrangements and accept contact sizes 2.5 mm (up to 40 amps) or 1.5 mm (up to 30 amps). They feature a coupling ring for mating and offer in-line, flange, or PCB mounting options.

The EH 22,5 F-C SS/ABS GY7035 serves as the upper component of a DIN rail housing, characterized by its flat design and a single connection opening on one side. With precise dimensions of 22.6 mm in width, 75.26 mm in height, and 36.95 mm in depth, this housing is finished in light grey (RAL 7035).Manufactured from ABS material, it complies with the flammability rating of HB as per UL 94 standards. It offers a maximum of 4 positions with a pitch of either 5 mm or 5.08 mm. The housing’s design includes ventilation openings and is suitable for various temperature ranges, supporting operational conditions from -40 °C to 80 °C.In terms of assembly, it utilizes a snap-in mounting type and can accommodate PCBs through a slot configuration. The product is packed in cardboard, with the outer packaging in carton form, ensuring safe transport and storage. The ambient temperature for storage and transport is maintained between -40 °C and 55 °C, while relative humidity can reach up to 95%.

The circuit breaker is designed for distribution applications, providing reliable protection against overloads and short circuits. With a rated breaking capacity of 18kA at 600VAC, this thermal magnetic circuit breaker also offers a continuous current rating of 100%. The device incorporates advanced features, including dual-break rotating contacts that minimize peak current during short circuit events. Measuring 163 mm in height, 104 mm in width, and 86 mm in depth, it connects via lugs on both the line and load sides. The breaker is compatible with a variety of auxiliary plug-in switches, enhancing its functionality for different applications. It complies with UL, CSA, NOM, and IEC standards, ensuring reliability and safety in various operating environments. This model is suitable for operation in ambient temperatures ranging from -2°C to 70°C and supports a wide range of wire sizes from AWG 14 to AWG 3/0. The circuit breaker also features a manual trip button and an integral push-to-trip functionality.

The RIF-2-RSC-LDP-125DC/4X21 is a pre-assembled relay module designed for universal applications. It integrates a relay base and power contact relay with a retaining bracket, facilitating easy installation. The module supports an input voltage of 125 V DC, with a functional input voltage range from 100 V DC to 156.25 V DC at 20 °C.Featuring 4 changeover contacts, the relay operates with a typical input current of 7.5 mA and a response time of approximately 13 ms. The relay's mechanical service life is rated at around 2x 107 cycles, ensuring long-term reliability.With a rated insulation voltage of 250 V AC and a maximum switching voltage of 250 V AC/DC, this module is well-suited for various electrical applications. It includes protective features such as a freewheeling diode and operates within an ambient temperature range of -40 °C to 60 °C. The degree of protection for the relay base is rated at IP20.This product adheres to the standards set by IEC 60947-5-1, ensuring compliance for industrial use.

The BL2 BPC 1501E-W-64-W10 is a fanless industrial box PC designed for reliable operation in challenging environments, with an IP30 protection rating. It is equipped with an energy-efficient Intel® Celeron® N3350 processor, capable of operating at frequencies of 1.10 to 2.4 GHz. The unit includes 32 GB of eMMC internal storage and a 64 GB M.2 SSD for enhanced data handling capabilities. This device supports a variety of industrial applications and features two COM ports, making it suitable for diverse communication needs. The operating system is Windows® 10 IoT Enterprise LTSC 2019 (64-bit), which offers multi-language support tailored for industrial environments. With a typical power consumption of 0.53 A at 24 V DC and a maximum power dissipation of 16.8 W, the box PC operates efficiently within a supply voltage range of 12 V DC to 30 V DC. Its passive cooling design ensures quiet operation while maintaining optimal performance in ambient temperatures from -20 °C to 50 °C, with storage capabilities extending from -40 °C to 85 °C. Connectivity options include dual Ethernet ports (10/100/1000 Mbps) facilitated by an Intel® I210-AT LAN chipset, ensuring robust network performance. The unit is designed for DIN rail mounting, facilitating straightforward installation in industrial settings.

The iEM3300 energy meter is part of the Acti9 iEM3000 series, specifically engineered for three-phase applications and mounted on DIN rails. It features a high-visibility LCD display and includes local signaling with a green LED indicator for power-on status as well as a flashing yellow LED for accuracy checks. This meter is capable of measuring both Active and Reactive Power along with Active and Reactive Energy, making it suitable for sub-billing and partial metering applications.It operates on networks with a frequency of 50Hz or 60Hz and can handle supply voltages ranging from 100 to 277VAC or 173 to 480VAC. With a line rated current of up to 125A via direct connection, it supports multiple configurations including Single Phase and Neutral, Three Phase, and Three Phase with Neutral. The device adheres to various accuracy standards, including class 1 for Active Energy according to IEC 62053-21 and IEC 61557-12.The unit is built to withstand an ambient temperature range of -25°C to 70°C during operation, and -40°C to 85°C for storage, with an IP degree of protection rated at IP40 for the front panel and IP20 for the body. Its dimensions are 126 mm in width, 69 mm in depth, and 103 mm in height, and it weighs 260 g. The iEM3300 energy meter is certified under multiple standards including CE and UL, ensuring compliance with safety and performance regulations.

The PTFIX 18X1,5-NS15A WH distribution block features a push-in connection method, accommodating conductor cross sections ranging from 0.14 mm² to 2.5 mm². This block is designed for a nominal voltage of 500 V and can carry a maximum current of 22 A, with a total current capacity of 26 A.With a mounting type of NS 15, the block measures 37.4 mm in width, 21.6 mm in height, and 27.4 mm in depth. It allows for internal bridging through the conductor shaft, and corresponding plug-in bridges can be found among the accessories. The blocks are suitable for operation in ambient temperatures between -60 °C and 110 °C, with a humidity range of 20% to 90%.This distribution block complies with the IEC 60947-7-1 standard and exhibits a flammability rating of V0 according to UL 94. It is manufactured from PA insulating material, providing a temperature index of 125 °C and relative insulation material temperature index of 130 °C. Furthermore, it adheres to various fire protection standards for rail vehicles, ensuring safe application in demanding environments.