Sistemas PLC y hardware

As-i compact module k60, IP67, a/b-slave (spec 3.0), digital, 4di/4do, 4x input for sensor (mechan., 2-wire, 3-wire), pnp, sensor supply from DC24v max. total 200ma 4 x output output supply DC 24v 8 x m12-socket y-ii-assignment mounting plate 3rk19010ca00 to be ordered separately

The Modicon TM3 Safety Expansion Module is a dedicated safety I/O that monitors emergency shutdown pushbuttons and limit switches. It adheres to the standards of PL e/Category 4 (EN/ISO 13849-1) and SIL CL3 (EN/IEC 62061). The module features a locking latch, two TM3 bus connectors for seamless linkage between connected modules, a symmetrical rail locking clip, and a display block for the module channels and diagnostics. This safety expansion module complements your Modicon M221, M241, or M251 PLC configuration without requiring a complete safety controller. It includes removable terminals for enhanced wire tightening during installation, ensuring improved reliability.

Key Features: The SINAMICS G120 POWER MODULE PM240-2 is equipped with a built-in CL. A filter and braking chopper, offering a robust solution for high-performance applications. With a voltage range of 3AC500-690V +10/-20% at 47-63HZ, this module provides reliable power output. Overload Capabilities: The high overload capacity is 18.5KW for 200% 3S, 150% 57S, and 100% 240S at an ambient temperature range of -20 to +50°C (HO). For low overload, the module can handle 22KW for 150% 3S, 110% 57S, and 100% 240S at an ambient temperature range of -20 to +40°C (LO). Dimensions and Protection: The module has dimensions of 472 x 200 x 237mm (HxWxD) and offers FSD protection with an IP20 rating, without the need for a control unit or panel. It is approved for CU firmware-version V4.7 HF8.

The SIMATIC s7-1500 Digital Output Module DQ16x24 V DC/0.5A HF is a high-performance device designed for industrial automation applications. It offers 16 channels, organized into groups of 8, with each group capable of handling up to 4 A. This module features single-channel diagnosis, allowing for efficient troubleshooting and maintenance. The substitute value provided is a switching cycle counter for connected actuators, ensuring reliable operation.This module adheres to safety standards, supporting the safety-oriented shutdown of load groups up to SIL2 according to EN IEC 62061:2021 and Category 3 / PL d according to EN ISO 13849-1:2015. It includes a front connector (screw terminals or push-in) that can be ordered separately for added flexibility.

EcoStruxure Panel Server is a gateway, providing connection of wired or unwired smart IoT devices to edge control software or cloud application. Connect wireless devices from Schneider Electric such as PowerTag Energy, PowerLogic HeatTag, Power Tag Ambiant, Power Tag control and others. Connect most of Modbus/RS485 and Modbus/TCP devices from the market including PowerMeters and Protection devices from Schenider Electric. User friendly web-pages offer first-lelvel of monitoring of measurements of all the conected devices including log of all alarms. Simple troubleshooting or the sytem through embedded web-pages with advanced diagnostic informations and logs . Easy commissioning through embedded web-pages or with EcoStruxure Power Commissionig that will offer commissioning reports and advanced features. Product dimensions are as follows: width 71,8 millimetres, depth 70,2 millimetres and height 85 millimetres. 24VDC Power Supply 3W Max. -25°C to +70°C Operating temperature. 5-95% relative humidity. Major certifications including CE, UL/CSA, IEC61010, UL61010, IEC61974-1, Marine certification, IEC61443-4-2, RCM, EAC and UKCA. The gateway can be DIN rail mounted in a modular enclosure. It has IP20 connectors, IM40 front face nose and IP30 on others faces. Two 10/100 Base-T ethernet RJ45 connectors. Modbus RS485 open-style connector. One connector for external Wi-Fi/Bluetooth antenna. Connector for two Digital Inputs for dry contact or WAGES. Direct cellular connection through external LTE router connected through Ethernet or Wi-Fi. Perfect fit for EcoStruxure Edge Software such as Power Monitoring Expert, Power Operations and EcoStruxure Building Operations. Designed for EcoStruxure Cloud Applications such as Facility Expert, Asset Advisor and Resource Advisor.

The Siemens REPEATER DIAG DP 12MB FAST-CONNECT IP20 is a high-performance diagnostic repeater designed for PROFIBUS DP networks. It enables online diagnostics of PROFIBUS cables, ensuring optimal network performance and reliability. This device supports transmission rates up to 12 Mbit/s and functions as a DP standard slave. The FastConnect connection method allows for quick and secure cable connections, enhancing installation efficiency.With a degree of protection IP20, this repeater is suitable for use in controlled environments. It operates within a temperature range of 0°C to 60°C and can be stored or transported in temperatures ranging from -40°C to 70°C. The device supports a relative humidity of up to 95% at 25°C, making it robust for various industrial applications.The Siemens REPEATER DIAG DP 12MB FAST-CONNECT IP20 is part of the SIMATIC S7 family and is currently in the Phase Out Announce lifecycle stage. It is compliant with RoHS and REACH directives, ensuring it meets environmental and safety standards. This product is also returnable and comes with options for spare part delivery, repair, and exchange services.

This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This high speed counter module has 8 channels, 2 single mode inputs and 3 special dual phase mode inputs. It is a counter module with an input voltage of 24V DC and a current consumption of 200mA at 3.3V DC bus, 80mA at 24V DC sensor. Counter functions are loop (modulo) counting, down counting, count events, 32bit counter counting etc. This product is robust, high quality and based on the latest innovative technology. It is furnished with 20-way connector for electrical connection. It is an IP20 rated product. It weighs 0.113kg. It is suitable for medium to large process applications. It meets EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. This input compatible with 19.2V to 30V 2-wire/3-wire proximity sensor, incremental encoder with push-pull outputs, 10V to 30V totem pole. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).

The SIMATIC ET 200SP, a digital output module, boasts a high-feature design capable of handling 4x24VDC/2A. This module is engineered to fit the BU type A0 and comes with a color code of CC02. It offers channel diagnostics for enhanced functionality.

The SIMATIC dp connecting module is designed to facilitate the connection of PROFINET interface modules with the ET 200 PRO system. This module supports both M12 and 7/8 connections, offering two M12 and two 7/8 interfaces for versatile use.This module is a crucial component in the SIMATIC dp system, ensuring seamless communication between various devices. It is compatible with the ET 200 PRO system, making it an ideal choice for industrial automation applications.

The Siemens CONNECTOR FRONT SCREW S7300 20PN 8/16PT is a high-quality front connector designed for use with SIMATIC S7-300 signal modules. This 20-pole connector features robust screw contacts, ensuring secure and reliable connections in industrial automation applications. The connector is part of the renowned SIMATIC S7-300 series, known for its reliability and performance in various industrial environments.Designed to meet stringent industry standards, this front connector offers easy installation and maintenance, making it an ideal choice for engineers and technicians. The connector's durable construction ensures long-lasting performance, even in demanding conditions. Additionally, it complies with the RoHS directive and has a WEEE take-back obligation, reflecting Siemens' commitment to environmental sustainability.With its compact design and compatibility with the S7-300 series, this front connector is perfect for a wide range of automation tasks, from simple control systems to complex industrial processes. Whether you are upgrading an existing system or building a new one, the Siemens CONNECTOR FRONT SCREW S7300 20PN 8/16PT provides the reliability and performance you need.

This product is part of the Modicon ABE7 range, an offer of IP20 sub-bases for Telefast pre-wired system. This connection sub-base is for distribution of 8 analogue channels. It is a sub base with a control circuit voltage of 24V DC. The distributed analog input channels are isolated from one another. It is furnished with screw type terminals for electrical connection and 25-way SUB-D connection to Programmable Logic Controllers (PLC). It is an IP20 rated product. It weighs 0.33kg. It is suitable for all types of industrial applications. This product is certified by LROS, DNV, UL, GL, BV and CSA. It meets CSA C22.2, IEC 61131 and UL 508 standards. This connection sub-base is suitable for use with Modicon X80 IO module BMXAM0800. It is delivered in 1 package (PCE type). It can be fixed by clips (35mm symmetrical DIN rail) and screws (solid plate with fixing kit). Modicon ABE7 means greater simplicity to rationalise wiring in automation system equipment. Pre-wired system enabling connection and adaptation of control signals of PLC cards equipped with HE10 connectors.

The ASI Compact Module is a robust solution designed to provide reliable and accurate data from 4-wire sensors. With its IP67 rating, this module ensures excellent protection against dust and water. It features four analog input channels with M12 sockets for easy integration of various sensor types. The module supports current inputs ranging from 4 to 20 mA, providing a wide range of compatibility for different sensor applications.The ASI Compact Module comes with a mounting plate (3RK1901-0CA00) that must be ordered separately. This allows for flexible installation options and ensures the module is securely fastened in place. The compact design of this module makes it ideal for space-constrained environments, while still providing high performance.In summary, the ASI Compact Module is a versatile and reliable choice for applications requiring precise data from 4-wire sensors. Its robust construction and wide compatibility make it an excellent addition to any industrial automation system.

The SIMATIC S7-300 Digital Input Module with 16 isolated digital inputs is designed for seamless integration into industrial automation systems. This module operates at 24V DC and is equipped with a 20-pole front connector for easy installation. It ensures high performance and reliability, meeting the stringent requirements of modern automation environments.Featuring IEC 61131 compliance, the module supports various input voltage ranges and signal types, making it versatile for different applications. The module's robust design includes optocoupler isolation between channels and the backplane bus, enhancing operational safety and reducing interference.With a typical power loss of 3.5W, the module is energy-efficient and suitable for continuous operation. It can handle up to 16 simultaneously controllable inputs, ensuring efficient processing even in demanding conditions. The module also supports connectable encoders, including 2-wire sensors, providing flexibility in system design.Although the module does not feature diagnostic functions or alarms, it includes a status indicator LED for each digital input, allowing for straightforward monitoring of input states. The module's compact dimensions (40mm width, 125mm height, 120mm depth) and lightweight design (approx. 200g) make it easy to integrate into existing setups.Ideal for use in hazardous locations, the module holds various approvals, including EMV, FM, CCC-Ex, and maritime applications. It complies with environmental standards such as the RoHS directive and REACH, ensuring it meets global regulatory requirements.

Designed as part of the PacDrive 3 range, this motion controller facilitates machine and line automation with support for 16 axes. The device incorporates 20 discrete inputs, including 4 configured for interrupt functionality and 16 dedicated to touch probe input, adhering to IEC 61131-2 type 1 standards. Operating on a 24VDC supply voltage, the controller delivers a discrete output current of 250mA and exhibits a power consumption of 36W. Enclosed in an IP20 rated housing, its physical dimensions are 100mm (width) x 243mm (depth) x 310mm (height), with a weight of 3.5kg. Certifications include CULus, CSA, CE, and EAC compliance. The device is designed to meet the requirements outlined in CSA C22.2 No 14, CSA C22.2 No 274, EN/IEC 61131-2, and UL 508C standards. PacDrive 3 LMC controllers offer scalable performance capable of synchronizing up to 130 servo or robot axes at a network update rate of 1ms, with support for up to 255 virtual axes.

This product is part of the Modicon TM3 range, an offer of expansion I/O modules for Modicon M221, M241, M251 and M262. The discrete input module provides 8 inputs with sink or source (positive/negative) logic. It is an input module with an input voltage of 24V DC and a current consumption of 24mA/5mA at 5V DC via bus connector. It can be used to create configurations with up to 8 inputs There is an insulation between input and internal logic at 500V AC and non-insulation between inputs. It is furnished with removable screw terminal for electrical connection with 5.08mm pitch adjustment for inputs. It is an IP20 rated product. Its dimensions are 27.4mm (Width) x 84.6mm (Depth) x 90mm (Height). It weighs 0.110kg. This product is certified by CE, CULus and C-Tick. It meets EN/IEC 61131-2 and EN/IEC 61010-2-201 standards. This module is compatible with Modicon M262, Modicon M241, Modicon M251 and Modicon M221 logic controller. It supports top hat type TH35-15, top hat type TH35-7.5 rail conforming to IEC 60715 and plate or panel with fixing kit mount. Modicon TM3 expansion modules have been designed with a simple interlocking assembly mechanism. A bus expansion connector is used to distribute data and the power supply when assembling the Modicon TM3 modules with logic controllers. Boost the performance of your controller with the Modicon TM3 I/O system specially designed for the Modicon M221, M241 and M251 logic controllers.

This analog output module is part of the Modicon X80 modules. It has 2 isolated high level outputs (15 bits + sign). It offers different ranges of voltage or current for each of the outputs depending on configuration choice. It occupies a single slot on the rack and it has a case which provides IP 20 protection of the electronics.

Inline, Relay terminal, Relay outputs: 2 (floating), Changeover contact, 24 V AC, 48 V DC, for switching ohmic loads, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector and labeling field

El Siemens 6ES7138-4CA01-0AA0 es un módulo de tecnología TM Count 24V para el sistema de E/S distribuida ET 200S. Como profesional de la automatización, comprende la importancia de los módulos tecnológicos especializados para manejar tareas específicas como el conteo de alta velocidad y la medición de frecuencia directamente a nivel de campo. Este módulo proporciona funciones de conteo versátiles para codificadores incrementales, codificadores de pulsos y señales de frecuencia con una interfaz de 24 V. Ofrece una adquisición precisa de señales rápidas, liberando al controlador central de estas tareas críticas en el tiempo y mejorando el rendimiento general del sistema. El módulo TM Count 24V presenta parámetros configurables para el modo de conteo, el control de la puerta y los valores de comparación, lo que permite una adaptación flexible a varios tipos de sensores y requisitos de aplicación. Su diseño compacto y su perfecta integración en el sistema ET 200S simplifican el cableado y la configuración. Este módulo es ideal para aplicaciones como detección de posición, monitoreo de velocidad, medición de flujo y otras tareas de conteo de alta velocidad en fabricación, empaque y otros procesos automatizados. Su diseño robusto garantiza un funcionamiento fiable en entornos industriales, contribuyendo a un control preciso y eficiente del proceso

This product is part of the Modicon M580 range, an offer of Programmable Automation Controllers (PAC) and safety Programmable Logic Controllers (PLC) with built-in Ethernet. This redundant processor module offers a maximum of 1 rack configuration. It is a processor module with a current consumption of 295mA at 24V DC. It supports 16384 discrete, 4096 analogue local I/O channels and 128 distributed equipment. It is furnished with Ethernet TCP/IP for service port, 2 Ethernet TCP/IP for device network, Ethernet for HSBY port and USB type mini B for integrated connections. It offers 600000 hours of MTBF. It has an integrated RAM of 16MB for program, 2048kb for data, 10kb for system memory and expandable flash of 4GB for data storage. It is an IP20 rated product. It weighs 0.849kg. It is suitable for medium to large process applications. This product is certified by CE, Merchant Navy, UL, RCM, CSA, EAC. It meets EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. The benefits of Modicon M580 are reduce time to market, improve reliability and sustainability, improve productivity with high performance and increase operating profitability due to improved access to data.

The Schneider Electric Modicon ABE7 Passive Connection Sub-Base is designed to simplify wiring in automation system equipment. It features 16 modularity input/output channels with 2 terminals per channel, allowing for a wide range of industrial applications. This sub-base has a maximum supply current of 1.8A and a rated supply voltage of 19V to 30V, making it suitable for various industrial settings.Constructed with screw clamp terminals for electrical connection, this IP2x rated product is compact with dimensions of 125mm (Width) and weighs 0.375kg. It is certified by GL, BV, CSA, UL, DNV, and LROS, ensuring high-quality performance and safety.The sub-base can be easily installed using clips (35mm symmetrical DIN rail) and screws (solid plate with fixing kit). This product is part of the Modicon ABE7 range, which offers connection sub-bases for Telefast pre-wired systems. The pre-wired system enables the connection and adaptation of control signals from PLC cards equipped with HE10 connectors.