Sistemas PLC y hardware

El módulo esclavo Siemens ASI A/B, número de pieza 3RK2200-0DQ00-0AA3, es un módulo de E/S digital compacto y robusto diseñado para el funcionamiento en campo. Este dispositivo cuenta con 8 entradas digitales y está protegido por una carcasa con clasificación IP67, lo que garantiza un rendimiento fiable en entornos industriales hostiles. El módulo admite la configuración de esclavo A / B y ofrece una entrada de corriente máxima de 270 mA. Cada uno de los 8 enchufes M12 está equipado con asignación Y-II, y el módulo requiere dos direcciones para su funcionamiento.Diseñado para una fácil integración, el módulo utiliza terminales de tipo tornillo M12 para conexiones eléctricas y admite tecnología de 2 y 3 hilos. El circuito de entrada se basa en transistores PNP y el suministro del sensor es resistente a cortocircuitos y sobrecargas, lo que proporciona una conexión estable y segura para los sensores.El direccionamiento del módulo se facilita a través de una toma de direccionamiento frontal y cuenta con pantallas de estado claras con LED amarillos para el estado de E/S y LED verdes/rojos para el diagnóstico de AS-Interface. El módulo funciona dentro de un rango de voltaje de 26,5 a 31,6 V de acuerdo con las especificaciones de AS-Interface y puede soportar temperaturas ambiente de -25 a +85 °C durante el funcionamiento.Este módulo esclavo ASI A/B es ideal para aplicaciones que requieren un manejo de entrada digital confiable en entornos exigentes, como plantas de fabricación, sistemas de automatización y configuraciones de control industrial. La placa de montaje (número de pieza 3RK1901-0CA00) debe pedirse por separado para garantizar una instalación adecuada.

This high level analog input module is part of the Modicon X80 modules. It has 8 isolated analog inputs (15 bits + sign). This module is connected via 28-way removable terminal block. The module offers different ranges of voltage or current for each of the inputs depending on configuration choice. It occupies a single slot on the rack and it has a case which provides IP 20 protection of the electronics.

This Modicon X80 Preformed Cordset is an integral part of Schneider Electric's offerings for M580 and M340 automation platforms. The cordset is designed to facilitate a seamless connection between sub-base and the X80 I/O module. With a length of 3 meters, this cable is equipped with a 25-pin D-sub (DE-09) connector for the sub-base side and a 20-way removable terminal block connector for the module side. The cordset weighs approximately 0.5 kg. The Modicon X80 range is part of EcoStruxure Plant, an open, flexible, reliable, sustainable, safe, and secure architecture that reduces maintenance and training costs by using compatible modules with the same spare parts in stock. The cordset is compatible with BMXAMO0802 and ABE7CPA02.

This high level analog input module is part of the Modicon X80 modules. It has 4 isolated analog inputs (16 bits) and is used with sensors or transmitters. This module is connected via 20-way removable terminal block. It performs monitoring, measurement, and process control functions for continuous processes. The module offers different ranges of voltage or current for each of the inputs depending on configuration choice. It occupies a single slot on the rack and it has a case which provides IP 20 protection of the electronics.

The SIMATIC S7-300 Analog Input Module is a high-performance solution designed to provide reliable and accurate input data for industrial automation applications. This module features optically isolated inputs, ensuring safe and stable operation even in harsh environments. It supports up to 2 analog inputs with a resolution of 9/12/14 bits, providing flexibility and precision in data acquisition.The module is compatible with various input types, including U/I/thermocouple/resistor, making it suitable for a wide range of industrial applications. It also includes alarm and diagnostic functions to help users monitor the system's health and performance. The module features a 1x 20-pole connector for easy removal and insertion with active backplane bus.

This 3m long cable is specifically designed to facilitate the Modbus serial link connection in your product integration. It features a robust construction that ensures reliable data transmission. The cable is equipped with one RJ45 and one 15-way male SUB-D connector, providing versatile connectivity options.The RJ45 connector offers a secure and stable connection, while the 15-way male SUB-D connector provides a high-speed data transfer capability. This cable is compatible with Altistart 48, ensuring seamless integration of your devices.

This product is part of the Zelio Logic range, an offer of smart relays for simple automation systems from 10 to 40 I/Os. This connecting cable enables to link Magelis small panel to Zelio Logic smart relay. The length of this cable is 2.5m. This connecting cable is equipped with 3-pin connector and 9-pin terminal block. It offers RS232 physical interface. It is suitable for use with Vijeo Designer software and to link Magelis small panel to smart relay. This product is compatible with Zelio Logic compact and modular smart relay HMISTO501. Simple to select, install and program, Zelio Logic is suitable for all your applications. Flexible, it offers you the choice of 2 ranges, compact or modular, extendable and 2 programming languages (FBD or LADDER). Easy to use, Zelio Logic provides a real alternative to solutions based on cabled logic or specific cards.

Eleve sus soluciones de automatización con la Siemens SIMATIC S7-1200 CPU 1214C, modelo 6ES7214-1AG40-0XB0. Esta CPU compacta y potente está diseñada para una amplia gama de tareas de control industrial, ofreciendo E/S integradas y un rendimiento robusto en un diseño que ahorra espacio.El 6ES7214-1AG40-0XB0 funciona con una fuente de alimentación de CC de 20,4-28,8 V CC, lo que lo hace adecuado para sistemas de alimentación industriales comunes. Cuenta con una amplia E/S integrada, que incluye 14 entradas digitales (DI) a 24 V CC, 10 salidas digitales (DO) a 24 V CC y 2 entradas analógicas (AI) que van de 0 a 10 V CC. Con una generosa memoria de programa/datos de 75 KB, esta CPU proporciona una amplia capacidad para la lógica de control compleja y el manejo de datos. Su factor de forma compacto (DC/DC/DC) lo hace ideal para aplicaciones en las que el espacio del armario es escaso. La Siemens SIMATIC S7-1200 CPU 1214C es una opción versátil y fiable para el control de sistemas de automatización pequeños y medianos, que ofrece un rendimiento eficiente y una fácil integración.

Rack ET200MP - se sitúa en el bus de conector en U en el medio del rack para alimentar tarjetas a su derecha - NO alimenta la CPU. Si desea un módulo de potencia estándar S7-1500, que se sitúe a la izquierda de la CPU S7-1500, que alimenta la CPU, elija uno de los siguientes: 1) 6EP1332-4BA00 - 24V / 3A, o 2) 6EP1333-4BA00 - 24V / 8A. SIMATIC S7-1500, FUENTE DE ALIMENTACIÓN DEL SISTEMA PS 60W 24/48/60V DC, SUMINISTRA VOLTAJE OPERATIVO PARA LA S7-1500 A TRAVÉS DEL BUS BACKPLANE

This front connector is specifically designed for the SIMATIC S7-300 40 pole system (6ES7392-1AM00-0AA0). It features 40 single cores with a cross-sectional area of 0.5 mm2, utilizing H05V-K single cores for enhanced performance and reliability.The connector is available in a screw version, providing easy installation and secure connection. It comes packaged in units of 5, with each unit measuring 2.5 meters in length.

This product is part of the Modicon TM5 range, an High-Performance and Safe IP20 Modular I/O System. The digital input module provides 12 inputs with sink (positive) logic. It provides a rated supply voltage of 24V DC, a current consumption of 36mA at 5V DCbus, 73mA at 24V DC all inputs on, a maximum power dissipation of 1.93W. This product is part of a flexible and scalable I/O configuration for automation solutions. There is an insulation between channel and bus at 500Vrms AC and no insulation between channels. It is furnished with single wire for electrical connection. It is an IP20 rated product. Its housing colour is white.It weighs 0.025kg. The Modicon TM5 meets the typical requirements of production and packaging machinery, as well as material handling and assembly systems. This product is certified by GOST-R, C-Tick, cULus and CSA. It meets IEC 61131-2, UL 508, CSA C22.2 No 213 and CSA C22.2 No 142 standards. This product is compatible with Modicon LMC058 motion controller and Modicon M258 logic controller. It is installed by mounting on a 35mm DIN rail. This modular IO system provides a flexible and scalable configuration of remote or distributed IO islands by connection with Modicon and PacDrive 3 controllers. Flexible and scalable, designed for complex machines.

The SIMATIC ET 200SP TM ECC 2xPWM ST Chargecontroller is designed for conductive charging of electric vehicles in compliance with IEC61851 mode 3. It supports up to 2 charging points and operates within a temperature range of -30°C to 60°C.This charge controller features 2 Control Pilot, 2 Plug Present, 2 DQ switch contact for contactor, and 2 DI read contact for contactor or connector locking. Additionally, it includes 2 ACT for connector locking suitable for BU Typ BU20-P12+A0+4B and BU20-P12+A4+0B.

This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This discrete I/O module has 8 input channels, 8 solid state output channels. It is a discrete I/O module with a discrete input/output voltage of 24V DC, an output current of 0.5A, a maximum power dissipation of 3.7W and current consumption of 67mA at 24V DC, 111mA at 3.3V DC. This product is robust, high quality and based on the latest innovative technology. It offers 447581 hours of MTBF. It is an IP20 rated product. It weighs 0.115kg. It is suitable for medium to large process applications. This product is certified by Merchant Navy, RCM, CSA, EAC, CE and UL. It meets EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. This input compatible with 2-wire/3-wire proximity sensors conforming to IEC 60947-5-2. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).

This product is part of the Modicon TM3 range, an offer of expansion I/O modules for Modicon M221, M241, M251 and M262. The discrete input module provides 16 inputs with sink or source (positive/negative) logic. It is an input module with an input voltage of 24V DC and a current consumption of 40mA/5mA at 5V DC via bus connector. It can be used to create configurations with up to 16 inputs. There is an insulation between input and internal logic at 500V AC and non-insulation between inputs. It is furnished with removable spring terminal for electrical connection with pitch 3.81mm adjustment for inputs. It is an IP20 rated product. Its dimensions are 27.4mm (Width) x 84.6mm (Depth) x 90mm (Height). It weighs 0.095kg. This product is certified by CE, CULus and C-Tick. It meets EN/IEC 61131-2 and EN/IEC 61010-2-201 standards. This module is compatible with Modicon M262, Modicon M241, Modicon M251 and Modicon M221 logic controller. It supports top hat type TH35-15, top hat type TH35-7.5 rail conforming to IEC 60715 and plate or panel with fixing kit mount. Modicon TM3 expansion modules have been designed with a simple interlocking assembly mechanism. A bus expansion connector is used to distribute data and the power supply when assembling the Modicon TM3 modules with logic controllers. Boost the performance of your controller with the Modicon TM3 I/O system specially designed for the Modicon M221, M241 and M251 logic controllers.

The SIMATIC dp module carrier wide version is designed to accommodate a variety of I/O modules and motor starters ET 200 PRO. This modular system allows for flexible configuration and is sold by the meter. With a length of 2000 mm, it provides ample space for multiple components.The SIMATIC dp module carrier wide version is an ideal solution for applications that require versatility and scalability. It can be easily configured to meet specific needs, making it a flexible choice for various industrial automation projects.

This product is part of the Modicon ABE7 range, an offer of connection sub-bases for Telefast pre-wired system. The sub-base with plug-in electromechanical relay, provides 16 channels. It has change over contact. This product enables rapid connection of I/O modules. It is a relay sub base with a supply voltage of 19V to 30V DC and a maximum supply current of 1A. It is an IP2x rated product. It weighs 1.3kg. It is suitable for all types of industrial applications. This product is certified by GL, CSA, DNV, BV, LROS and UL. This sub-base is suitable for use with ABR7S33 plug-in relay. The fixing is done by clips (35mm symmetrical DIN rail) and screws (solid plate with fixing kit). Modicon ABE7 means greater simplicity to rationalise wiring in automation system equipment. Pre-wired system enabling connection and adaptation of control signals of PLC cards equipped with HE10 connectors.

Módulo de entradas/salidas digitales SIMATIC S7-1500. DI 32x24VDC BA SNK / SRC. 32 canales en grupos de 16. retardo de entrada típico 3,2 ms tipo de entrada 3 (IEC 61131). entrada sumidero/fuente. DQ 32XDC 24V/0,3A SNK BA; 32 canales en grupos de 16; 2 A por grupo a 60 °C; salida de fuente; ancho de 35 mm; cables y bloques terminales deben ordenarse por separado como accesorios

The SIMATIC S7-400 Interface Module Send IM460-3 is a powerful solution designed for distributed connection in industrial automation systems. This module supports coupling distances of up to 102 meters, making it ideal for applications that require long-range communication. It features the C-bus interface, ensuring seamless integration with other SIMATIC S7-400 components.The IM460-3 is a versatile transmitter interface module, capable of handling multiple data streams and providing reliable, high-speed communication. Its robust design and advanced technology ensure optimal performance in demanding industrial environments. The module's compact size and lightweight construction make it easy to install and integrate into existing systems.The SIMATIC S7-400 Interface Module Send IM460-3 is a key component in the SIMATIC S7-400 automation platform, offering enhanced connectivity and data exchange capabilities. Its advanced features and reliable performance make it an indispensable tool for modern industrial automation systems.

This product is part of the Modicon M340 range, an offer of Programmable Automation Controllers (PAC). This connector kit is an connection accessory kit of counter modules. This product is robust, high quality and based on the latest innovative technology. It weighs 0.021kg. It is suitable for medium to large process applications. This kit is compatible with BMXEHC0200 counter module. The kit includes two 16-pin connectors, one 10-pin connector. It is available in set of 5.

SIMATIC STEP 7 ProfessionalV17; actualización V11..V16-> V17 o V11/2010..V16/2017 -> V17/2021 o 2006..2017-> V17/2021 Combo Floating License; Software de ingeniería en el TIA Portal; también aplica para actualización desde licencias individuales V11; software y documentación en DVD; clave de licencia en memoria USB; clase A; 9 idiomas: de, en, zh incluidos, fr, sp, it, ru, jp, kr como descarga; ejecutable en Windows 10, Windows Server 2016/2019; para configurar SIMATIC S7-1200/1500, S7-300/400/WinAC, SIMATIC Basic Panels ******************************* contenido: conjunto (5x DVD + 1x USB)