PT-DZ870

Specifications

Power supply

120-240 V AC, 10-5.2 A, 50/60 Hz

Power Consumption (120-240V AC, 50/60Hz)

1,030 W (1,060 VA) (0.3 W with STANDBY MODE set to ECO, 3 W with STANDBY MODE set to NORMAL)

DLP™ chip Panel size

17.0 mm (0.67 in) diagonal (16 -10 aspect ratio)

DLP™ chip Display method

DLP™ chip x 1, DLP™ system

DLP™ chip Pixels

2,304,000 (1,920 x 1,200) x 1, total of 2,304,000 pixels

Lens PT-DZ870K/DZ870W

Powered zoom/focus lenses (1.7-2.4 -1), F 1.7-1.9, f 25.6-35.7 mm

Lens PT-DZ870LK/DZ870LW

Optional powered zoom/focus lenses and fixed-focus lens

Lamp

420 W UHM lamps (x 2)

Screen size

1.27 -15.24 m (50-600 inches) (1.27-5.08 m (50-200 inches) with the ET-DLE055 (16 -10 aspect ratio)) (2.54-8.89 m (100-350 inches) with the ET-DLE030 (16 -10 aspect ratio))

Brightness

8,500 lumens (dual lamp, LAMP MODE - NORMAL)

Center-to-corner uniformity

90%

Contrast

10,000 -1 (full on/full off, in dynamic iris 3 mode)

Resolution

1,920 x 1,200 pixels

Scanning Frequency (SDI)

3G-SDI signal (RGB 4 -4 -4 12-bit/10-bit) - SMPTE ST 424 compliant - 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p; 3G-SDI signal (YPBPR 4 -2 -2 10-bit) - SMPTE ST 424 compliant - 1125(1080)/60p, 1125(1080)/50p; HD-SDI signal (YPBPR 4 -2 -2 10-bit) - SMPTE ST 292 compliant - 750(720)/60p, 50(720)/50p, 1125(1035)/60i, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p; SD-SDI signal (YCBCR 4 -2 -2 10-bit) - SMPTE ST 259 compliant - 525i(480i), 625i(576i)

Scanning Frequency (HDMI/DVI-D)

fH - 15-100 kHz, fV - 24-120 Hz, dot clock - 25-162 MHz

Scanning Frequency (RGB)

fH - 15-100 kHz, fV - 24-120 Hz, dot clock - 162 MHz or lower

Scanning frequency YPBPR (YCBCR)

525i(480i) - fH 15.75 kHz; fV 60 Hz, 625i(576i) - fH 15.63 kHz; fV 50 Hz, 525p (480p) - fH 31.50 kHz; fV 60 Hz, 625p(576p) - fH 31.25 kHz; fV 50 Hz, 750 (720)/60p - fH 45.00 kHz; fV 60 Hz, 750(720)/50p - fH 37.50 kHz; fV 50 Hz, 1125(1035)/60i - fH 33.75 kHz; fV 60 Hz, 1125(1080)/60i - fH 33.75 kHz; fV 60 Hz, 1125(1080)/50i - fH 28.13 kHz; fV 50 Hz, 1125(1080)/25p - fH 28.13 kHz; fV 25 Hz, 1125(1080)/24p - fH 27.00 kHz; fV 24 Hz, 1125(1080)/24sF - fH 27.00 kHz; fV 48 Hz, 1125(1080)/30p - fH 33.75 kHz; fV 30 Hz, 1125(1080)/60p - fH 67.50 kHz; fV 60 Hz, 1125(1080)/50p - fH 56.25 kHz; fV 50 Hz

Scanning Frequency (Video/Svideo)

fH - 15.75 kHz, fV - 60 Hz [NTSC/NTSC4.43/PALM/PAL60]; fH - 15.63 kHz, fV - 50 Hz [PAL/PALN/SECAM]

Optical axis shift

Vertical - +50% (powered), horizontal - ±10% (powered); NOTE - Optical If using the ET-DLE030, the optical axis is fixed. axis shift function cannot be operated when used with the ET-DLE055.

Keystone correction range

Vertical ±40°(vertical ±30° with the ET-DLE055/DLE085/DLE105, vertical +5° with the ET-DLE030); When using only the KEYSTONE correction of the Geometric Adjustment function - Vertical ±40°, horizontal ±15°(vertical ±30° and horizontal ±15° with the ET-DLE055/DLE085/DLE105); When using the optional upgrade kit ET-UK20 - Vertical ±45° and horizontal ±40°(vertical ±22° and horizontal ±15° with the ET-DLE055/DLE085/DLE105, vertical +5° with the ET-DLE030); When using both the KEYSTONE and CURVED corrections of the Geometric Adjustment function - Vertical ±20°, horizontal ±15°(vertical ±8° and horizontal ±8° with the ET-DLE055/DLE085/DLE105)

Installation

Ceiling/floor, front/rear

Terminals SDI IN

BNC x 1, 3G-SDI signal - SMPTE ST 424 compliant; HD-SDI signal - SMPTE ST 292 compliant; SD-SDI signal - SMPTE ST 259 compliant

Terminals HDMI IN

HDMI 19-pin x 1, Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock - 25 MHz-162 MHz; NOTE - Compatible with non-interlaced signals only

Terminals DVI-D IN

DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only; 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p; VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock - 25 MHz -162 MHz; NOTE - Compatible with non-interlaced signals only.

Terminals RGB 1 IN

BNC x 5

Terminals RGB 1 IN R, G, B

R - 0.7 Vp-p, 75 ohms; G - 0.7 Vp-p (G - 1.0 Vp-p for sync on G), 75 ohms; B - 0.7 Vp-p, 75 ohms; HD, VD/SYNC - TTL, high impedance, positive/negative automatic; NOTE - SYNC/HD and VD terminals do not accept tri-level sync signals.

Terminals RGB 1 IN Y, PB, PR (Y, CB, CR)

Y - 1.0 Vp-p (including sync signal), PB/PR (CB/CR) - 0.7 Vp-p, 75 ohms

Terminals RGB 1 IN S-Video signal

Y - 1.0 Vp-p, C - 0.286 Vp-p, 75 ohms

Terminals RGB 2 IN

D-sub HD 15-pin (female) x 1

Terminals RGB 2 IN R, G, B

R - 0.7 Vp-p, 75 ohms; G - 0.7 Vp-p (G - 1.0 Vp-p for sync on G), 75 ohms; B - 0.7 Vp-p, 75 ohms; HD, VD/SYNC - TTL, high impedance, positive/negative automatic; NOTE - SYNC/HD and VD terminals do not accept tri-level sync signals

Terminals RGB 2 IN Y, PB, PR (Y, CB, CR)

Y - 1.0 Vp-p (including sync signal), PB/PR (CB/CR) - 0.7 Vp-p, 75 ohms

Terminals 3D SYNC 1 IN/OUT

BNC x 1, 1.0 Vp-p, 75 ohms; Input - TTL, high impedance. Output - TTL, max. 10 mA

Terminals 3D SYNC 2 OUT

BNC x 1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA

Terminals VIDEO IN

BNC x 1, 1.0 Vp-p, 75 ohms

Terminals SERIAL IN

D-sub 9-pin (female) x 1 for external control (RS-232C compliant)

Terminals SERIAL OUT

D-sub 9-pin (male) x 1 for link control (RS-232C compliant)

Terminals Remoter 1 In

M3 jack x 1 for wired remote control

Terminals Remoter 1 Out

M3 jack x 1 for link control

Terminals Remoter 2 In

D-sub 9-pin (female) x 1 for external control (parallel)

Terminals LAN/DIGITAL LINK

RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compatible with Art-Net, compliant with PJLink™ (class 1), Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock - 25 MHz - 162 MHz; NOTE - Compatible with non-interlaced signals only.

Power cord length

3.0 m (9 ft 10 in)

Cabinet materials

Molded plastic

Dimensions (W x H x D) PT-DZ870K/DZ870W

498 x 200 x 556 mm (19-19/32 x 7-7/8 x 21-7/8 inches) (with supplied lens)

Dimensions (W x H x D) PT-DZ870LK/DZ870LW

498 x 200 x 513 mm (19-19/32 × 7-7/8 × 20-3/16 inches) (without lens)

Weight PT-DZ870K/DZ870W

Approx. 18.3 kg (40.3 lbs) (with supplied lens)

Weight PT-DZ870LK/DZ870LW

Approx. 17.6 kg (38.8 lbs) (without lens)

Operation noise

40 dB (dual lamp operation, LAMP MODE - NORMAL), 35 dB (dual lamp operation, LAMP MODE - ECO)

Operating temperature

0 ℃ - 45 ℃ (32℉ - 113 ℉)

Operating humidity

10% - 80% (no condensation)

Technology

1-Chip DLP

Note

Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.

Documents