Phoenix Contact 2924032

Additional information

Part Number	2924032
UPC	4046356337342
Country of origin	DE
ETIM	Group code: EG000026 Group description: Sensors Class code: EC002653 Class description: Isolation amplifier Version: 7

Input data

Current input signal	0 mA - 20 mA
Current input signal	4 mA - 20 mA
Input impedance	> 100 kΩ (If there is a line fault)
Voltage drop	5.4 V (20 mA)

Dimensions

Width	12.5 mm
Height	116.9 mm
Depth	113.7 mm

Connection data

Connection method	Push-in connection
Stripping length	8 mm
Conductor cross section solid	0.2 mm² - 1.5 mm²
Conductor cross section flexible	0.2 mm² - 1.5 mm²
Conductor cross section AWG	24 - 16

Output data

Signal output	Current output
Current output signal	0 mA - 20 mA (intrinsically safe)
Current output signal	4 mA - 20 mA (intrinsically safe)
Transmission Behavior	1:1 to input signal
Load/output load current output	< 800 Ω (20 mA)
Load/output load current output	< 730 Ω (22.5 mA)
Output ripple	< 20 mVrms

Data communication (bypass)

HART function	Yes
Protocols supported	HART

Ambient conditions

Ambient temperature (operation)	-20 °C - 60 °C (Any mounting position)
Ambient temperature (storage/transport)	-40 °C - 80 °C
Maximum altitude	≤ 2000 m
Permissible humidity (operation)	10 % - 95 % (non-condensing)
Degree of protection	IP20 (not assessed by UL)
Noise immunity	EN 61000-6-2 When being exposed to interference, there may be minimal deviations.

Environmental Product Compliance

REACh SVHC	Lead 7439-92-1
China RoHS	Environmentally Friendly Use Period = 50 years
China RoHS	For details about hazardous substances go to tab 'Downloads', Category 'Manufacturer's declaration'

EMC data

Designation	Electromagnetic RF field
Standards/regulations	EN 61000-4-3
Designation	Fast transients (burst)
Standards/regulations	EN 61000-4-4
Typical deviation from the measuring range final value	1 %
Designation	Conducted interferences
Standards/regulations	EN 61000-4-6

Safety data

Max. output voltage Uo	27.7 V
Max. output current Io	92 mA
Max. output power Po	633 mW
Group	IIC
Max. external inductivity Lo	2 mH
Max. external capacitance Co	85 nF
Group	IIB
Max. external inductivity Lo	4 mH
Max. external capacitance Co	663 nF
Safety-related maximum voltage Um	253 V AC (125 V DC)

Safety characteristic data

Integrity requirement	IEC 61508 - Low demand
Equipment type	Type A
Safety Integrity Level (SIL)	2
Safe Failure Fraction (SFF)	94.68 %
ΛSU	4.965 x 10-⁷ (496.5 FIT)
ΛSD	0
ΛDU	2.79 x 10-⁸ (27.9 FIT)
ΛDD	0
Probability of a hazardous failure on demand (PFDAVG)	1.22 x 10-⁴ (1 year)
Probability of a hazardous failure on demand (PFDAVG)	6.1 x 10-⁴ (5 years)
Probability of a hazardous failure on demand (PFDAVG)	12.2 x 10-⁴ (10 years)
Diagnostic coverage (DC)	DCS=0 %, DCD=0 %
Integrity requirement	IEC 61508 - High demand
Probability of a hazardous failure per hour (PFHD)	2,79 x 10-⁸

Standards and Regulations

Electromagnetic compatibility	Conformance with EMC directive
Noise emission	EN 61000-6-4
Designation	Electromagnetic RF field
Standards/regulations	EN 61000-4-3
Standards/regulations	EN 61000-4-4
Designation	Conducted interferences
Standards/regulations	EN 61000-4-6
Conformance	CE-compliant, additionally EN 61326
ATEX	II (1) G [Ex ia Ga] IIC/IIB
ATEX	II (1) D [Ex ia Da] IIIC
ATEX	II 3(1) G Ex nA [ia Ga] IIC/IIB T4 Gc
IECEx	[Ex ia Ga] IIC/IIB
IECEx	[Ex ia Da] IIIC
IECEx	Ex nA [ia Ga] IIC/IIB T4 Gc
UL, USA/Canada	Class I Div 2; IS for Class I, II, III Div 1
DNV GL-Temperature	B
DNV GL-Humidity	B
DNV GL-Vibration	A
DNV GL-EMC	B
DNV GL-Enclosure	Required protection according to the Rules shall be provided upon installation on board
Group	IIC
Group	IIB

Power supply

Nominal supply voltage	24 V DC
Supply voltage range	19.2 V DC - 30 V DC (24 V DC -20%...+25%)
Max. current consumption	< 46 mA (at 24 V DC / 20 mA)
Power dissipation	< 1.1 W (at 24 V DC / 20 mA)