Czujniki automatyki

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

The Siemens SLG 75 MOBY E Antenna is a high-quality RF antenna designed for use with the SLG 75 100mm system. This antenna features a PVC jacket and offers an IP65 rating, making it suitable for a wide range of environments. It is also temperature-resistant, capable of operating in temperatures ranging from -25 to +70 degrees Celsius. The antenna measures 75x75x20 mm and has a cable length of 3 meters. This makes it easy to install and position as needed for optimal performance.

This Harmony XB5,head and mounting base is used for potentiometer application. This head and mounting base for potentiometer provides an ergonomic external interface for controlling your machines thanks to its knurled knob head. It is ideal for controlling key parameters of automation components like drives and inverters and is easily installed and replaced on compatible potentiometers. It is impact resistant, dust resistant, water resistant and vibration resistant thanks to its IP65. It has a metal bezel, this makes it ideal for applications requiring high impact and vibration resistance. It is designed to fit in a standard 22mm cutout, ensuring compatibility when installing in pre-existing machinery. Its wide range of operating temperatures from -40°C to 70°C allows versatility in usage of product.

This rectangular sensor is specifically intended for VigiPacT type A residual current protection and monitoring relays, enabling precise current measurements up to 3200A.With a transformer ratio of 1/1000, this sensor is designed to ensure accurate monitoring and protection. Its dimensions are 470mm x 160mm, and it weighs 20kg. The sensor accommodates wiring sizes from 0.5 to 2.5 mm², with a maximum wiring length of 10m.Operating within temperatures ranging from -35 to 80 °C, it also features an ambient air temperature for storage of -55 to 100 °C. The sensor is compliant with IEC 60947-2 standards and offers an IP30 degree of protection for the body and IP20 for connectors.It is constructed to withstand environmental conditions, with compliance to IEC 60068-2-30 and IEC 60068-2-52 for exposure to damp heat and salt mist, respectively. The pollution degree is rated at level 3 according to IEC 60664-1. This sensor is compatible with various VigiPacT relays, including RH10M, RH10P, and RH99P, among others.

The XS5 M12 inductive proximity sensor is designed for versatile applications, featuring a nominal sensing distance of 2mm and a robust brass housing that ensures durability. This sensor operates efficiently across a supply voltage range of 24V to 240V AC/DC, making it suitable for various industrial environments. Constructed with a PPS sensing face and nickel-plated brass casing, it offers exceptional corrosion resistance and magnetic shielding. This design enhances the sensor's accuracy and immunity to magnetic disturbances. The cylindrical form factor allows for flush mounting, facilitating installation on surfaces or brackets using the provided outer thread and twin nuts. With an IP67 and IP69K rating, the sensor is built to withstand harsh conditions, functioning effectively in temperatures ranging from -25°C to +70°C. The sensor is equipped with 4 LED viewports for easy monitoring of operational status, allowing for straightforward setup and troubleshooting. Additional features include a maximum switching capacity of 200 mA, a response time of 0.5 ms, and a switching frequency of up to 1000 Hz DC. It is also certified under CSA and UL standards, ensuring compliance with safety regulations.

The Class 1000 (H10) Meter provides precise kW and kWh data for single-phase electrical systems. This revenue-grade submeter ensures data retention during power outages and comes equipped with a single set of split-core current sensors. It is compatible with WEBs-AX Energy Analytics and E-mon Energy Software, facilitating effective energy management. Designed to operate within a temperature range of -4 °F (-20 °C) to 122 °F (50 °C), this device supports a maximum ambient humidity of 95% non-condensing. The meter adheres to ANSI C12.20 and UL/CUL regulatory standards, ensuring reliable and safe operation. With a two-wire input voltage configuration and a frequency range of 50 Hz to 60 Hz, the meter features a 2-line LCD display for easy monitoring. Its specifications include an overall width of 6 inches (152 mm), height of 7.5 inches (171 mm), and depth of 3 inches (76 mm), while it weighs 5.82 pounds. The accuracy of this meter is ±1% from 1% to 100% of the rated load, making it suitable for commercial and industrial applications.

The Standard Sensor/Actuator Box Header is designed for a variety of applications. It features an M12-SPEEDCON-socket Plastic connection method, offering 8 slots and 5 positions. The coding system is A - standard, with double slot assignment for efficient use. The header includes a status display feature, making it easy to monitor the system's performance. The master cable connection is facilitated by a pluggable screw connection, ensuring secure and reliable connectivity. Despite its robust features, this product does not include shielding.

The inductive standard sensors are engineered for effective object detection in metallic environments. With a dimension of Ø 12 x 44 mm, these sensors support flush mounting installations and offer a sensing range of 4 mm. The BES 516-375-G-E5-C-S49 model operates with an NPN normally closed (NC) switching output and a switching frequency of 2500 Hz, ensuring reliable performance.Constructed from brass with a nickel-free coating, the housing provides durability against environmental factors, while the sensing surface is made from LCP, enhancing its resistance to dirt and contamination. These sensors are designed to function within an operating voltage range of 10-30 VDC and can withstand ambient temperatures from -25°C to 70°C.With an IP67 rating, the sensors are fully protected against dust and water ingress. They also meet several approvals, including CE, cULus, EAC, and WEEE, making them suitable for various industrial applications.

The PACT RCP-4000A-UIRO-PT-D95 comprises a 4-way signal conditioner complemented by a Rogowski coil, suitable for AC current measurement in various applications, including busbars and power lines. The Rogowski coil features a length of 300 mm and a diameter of 95 mm, enabling precise measurement within its operational range. The signal conditioner provides eight different standard output signals and includes one switching output. It operates within a nominal supply voltage of 24 V DC, with an operational voltage range of 9.6 V DC to 30 V DC and a power consumption of ≤ 1 W. The device adheres to overvoltage category II and has a reinforced insulation rating in accordance with IEC 61010-1. With an accuracy class of 0.2 and a typical measuring error of less than 1%, this device ensures reliable performance. It supports an input frequency range from 16 Hz to 20 kHz and features a step response time of 110 ms. The switching output, which consists of one N/O contact, can handle a minimum switching voltage of 1 V and a maximum of 30 V DC, making it versatile for various applications. The Rogowski coil and signal conditioner are designed to operate under ambient temperatures ranging from -30 °C to 80 °C for the coil and -40 °C to 70 °C for the transducer. Additionally, the device is equipped with surge protection and meets electromagnetic compatibility standards.

The ultrasonic sensor in the M18 cylindrical design utilizes advanced ultrasonic technology for the non-contact detection of materials. With a sensing distance of 0.5 m that can be adjusted remotely or via an external teach button, this device is suitable for diverse applications. The sensor operates on a supply voltage range of 12 to 24 V DC and is equipped with a 4-pin male connector (M12).Constructed from durable plastic, the sensor has an IP67 rating, ensuring protection against dust and water ingress, making it reliable for various industrial environments. The device features a maximum switching current of 100 mA and a switching frequency of up to 40 Hz. Additionally, its design includes a status LED indicating power and output state.With a beam angle of 6° and a minimum detectable object size of 2.5 mm, the sensor achieves a repeat accuracy of 1.27%. It complies with multiple standards, including IEC 60947-5-2, and has certifications such as UL, making it a robust choice for automation tasks.

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

This Harmony XVB orange illuminated unit is supplied with up to 250V AC/DC bulb, bulb order separately, steady light. This orange indicating bank lens is designed as an illuminated unit to be connected with base and create complete tower light. Its integral LED offers a steady light, allowing it to clearly display the status of your machines in applications such as automotive, machine tool, material handling, packaging, assembly stations, conveyors. It is impact resistant, dust resistant, water resistant and vibration resistant thanks to its IP66, making it ideal for operation in harsh environments. Simple and modular design to allow for easy installation with base unit and make complete tower light. It complies with international standards and certifications (CCC, CSA C22-2 No.14, EN/IEC 60947-5-1, EAC, UL 508 standards and NEMA 4X).

3-way signal conditioner with plug-in connection technology for the electrical isolation of analog signals. Input signal: 0(4) mA ... 20 mA, output signal: 0(4) mA ... 20 mA, screw connection technology

Diffuse sensors with background suppression ensure reliable detection regardless of the surface, color and material.Their scanning behavior is virtually constant, even with different reflectance levels.

2-channel NAMUR signal conditioner with wide range power supply for proximity sensors and switches. In terms of signal output, for each channel there is a relay with a changeover contact available. Line fault detection (LFD), 3-way isolation, Push-in connection, SIL 2.

Mechanical position switches are the classics of automation. The switching process is carried out by a telescopic ram. This ram is used to connect a mechanical switching element in a separate sealed chamber.The optimal choice of ram shape for the application in combination with our cams guarantees a long service life.

Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and contamination. The sensors are available in configurations from 3 mm Ø to 80 × 80 mm square dimensions. The rugged and reliable inductive Global Sensors provide especially economical solutions. We can also delivery the broad range of these over 500 preferred types worldwide in the shortest possible time.

Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the electrical isolation of analog signals. Configurable via DIP switch or software. Screw connection technology, standard configuration.

This product is an 8-position sensor/actuator cable made of PUR halogen-free material, finished in black-gray RAL 7021. It features straight M12 plugs and sockets with coding A on both ends. The cable length is 3 meters.

Sensor/actuator box, application: Standard, connection method: M12-SPEEDCON-socket Metal, number of slots: 8, number of positions: 4, coding: A - standard, slot assignment: single, status display: yes, pnp; master cable connection: Pluggable screw connection 180°, shielding: no