Spotkaj globalnych liderów automatyki przemysłowej na ANEXPO 2027| Dowiedz się więcej
Filtry
Inductive proximity sensors XS, inductive sensor XS1 M18, L60mm, brass, Sn5mm, 12...24 VDC, cable 2 m
The XS series is a range of inductive proximity sensors that enable the detection of metal objects without physical contact. The benefits of inductive detection include no wear and the ability to…
Bus system cable, INTERBUS (16 Mbps), 5-position, PUR halogen-free, may green RAL 6017, shielded, Plug straight M12 SPEEDCON, coding: B, on Socket straight M12 SPEEDCON, coding: B, cable length: 0.5 m
The position switch is designed with a metal enclosure measuring 56 mm in width, featuring a roller plunger with a stainless steel roller of 13 mm in diameter. It is equipped with three device…
This Harmony XB4 potentiometer has a resistance of 1kΩ. It has a metal bezel. This potentiometer provides an external interface for controlling key parameters of automation components like drives and…
Steel Round Plunger Position Switch, 40 mm EN 50041 Compliant, 1 NO/2 NC
This product is a steel round plunger position switch with a 40 mm enclosure , designed to meet the standards set by EN 50041. It comes equipped with a device connection of 1x (M20 x 1.5), providing…
Accessories Further accessories, Heating and cooling devices, Cooler housing, Peltier cooling unit, polyamide 6 housing
The TPCC cooling jacket works using the Peltier effect, making it possible to operate sensors permanently at ambient temperatures of +75 °C. In addition, the TPCC is able to significantly increase…
Ex i repeater power supply and input signal conditioner, HART-transparent. Transmits supplied or active 0/4 ‚Ķ 20 mA signals from the Ex area to a load (active or passive) in the safe area. 3-way…
3-way output signal conditioner for transmitting 0/4 ... 20 mA signals from the controller to a load located in the field with simultaneous 3-way electrical isolation between the input, output, and…
Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and…
The inductive standard sensor model M12MG1-POC60B-S04G is optimized for detecting objects in metallic surroundings. With a dimension of Ø 12 x 60 mm, it operates at a sensing range of 6 mm and…
Inductive proximity sensor XS8 26x26x13, PBT, Sn15mm, 12...24 VDC, M12 0.15 m
The inductive proximity sensor XS8 is designed for general purpose applications, featuring a non-flush mountable frontal detection face. Its compact dimensions of 26mm in width and height, alongside…
The 22mm potentiometer operates with a resistance of 470kΩ, making it suitable for various automation control applications. It is designed to be easily installed in standard 22mm cut-outs and…
The MKey8 Safety Interlock Switch is a robust solution designed for industrial applications. It features a sturdy die-cast housing and head, ensuring durability and reliability in demanding…
Sensor/actuator box, application: Standard, connection method: M12-SPEEDCON-socket Plastic, number of slots: 8, number of positions: 5, coding: A - standard, slot assignment: Double, status display…
Inductive proximity sensors XS, inductive sensor XS8 40x40x117, PBT, Sn20 mm, 12...48 VDC, terminals
This XS turret head (40 x 40 x 117 mm) with an inductive proximity sensor has a PBT case. It has a supply voltage of 12V to 48V DC. This general purpose flat inductive proximity sensor has an…
The sensor/actuator box is optimized for standard applications, utilizing an M12-SPEEDCON plastic socket connection. This model features four slots and accommodates five positions, with a coding type…
Inductive standard sensors with preferred types BES M08EE-PSC15B-S49G-003
Our standard inductive sensors are ideal for object detection in metal areas. They are short-circuit protected and operate without contact, making them wear-free and very resistant to dirt and…
The SACB-8/ 8-L-C GG SCO P is a sensor/actuator box header suitable for standard applications. It incorporates a M12-SPEEDCON-socket plastic connection method that ensures reliable interfacing. This…
This connector hood is specifically engineered for use in sensor and actuator boxes, providing a reliable connection through an M12-SPEEDCON plastic socket. It accommodates eight slots with a double…
This position switch is constructed with a plastic housing that adheres to EN 50047 standards and includes a device connection of 1 x (M20 x 1.5). The switch incorporates a roller plunger with a 10…