Elektronika i płytki PCB

The TeSys D contactors are designed for seamless integration into control systems. They can be used to create motor starters for a wide range of applications. These contactors are available in 13 different ratings, catering to inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This specific 4 pole IEC contactor can be mounted on DIN rail or directly onto a panel. The contactor features four normally open power contacts, each with a 20A resistive load rating. It comes equipped with a 240 VAC 50/60 Hz coil and includes one normally open and one normally closed auxiliary contact as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections, and an extensive line of accessories allows for easy customization to meet the needs of various applications. This contactor measures 3.35 inches in height, 1.77 inches in width, and 3.62 inches in depth, weighing 0.80 lbs. The TeSys D contactors are certified to UL, CSA, IEC, CCC, EAC, and Marine standards, and they meet the requirements of RoHS/REACh, making them a Green Premium product.

TeSys F contactor, 3 poles (3NO), 400A/1000V AC-3, for motor applications up to 200kW@400V. Contactor with no coil to allow a later selection and installation (coil to be ordered separately), it provides bolt terminals for bars or cables with lugs. For high operating rates until 2400 cycles/hour and environments until 55°C, it procures high reliability and durability. It makes installation and maintenance easy thanks to a drawer for insertion of the selected coil and a large choice of add-on blocks and accessories (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 32A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC and 30HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 5HP at 240VAC single phase. When used with a 480VAC up to 60A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 80A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 48 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.83 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys Deca Green Nonreversing IEC Contactor is an integral component in control systems, designed for seamless integration. This contactor is suitable for a wide range of applications, offering 13 different ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. The 12A inductive 3 pole IEC contactor can be mounted on DIN rail or directly on a panel. It boasts both Horsepower and Kw motor ratings for international acceptance. This contactor is rated for 3HP at 200-208VAC, 3HP at 240VAC, 7.5HP at 480VAC, and 10HP at 600VAC three phase. It also supports single phase applications with ratings of 0.5HP at 115VAC and 2HP at 240VAC. When paired with a 480VAC up to 35A circuit breaker, the contactor can handle SCCR up to 85kA. With an up to 600VAC 30A Class J or CC fuse, it can manage SCCR up to 100kA. The contactor is equipped with an electronic coil, offering wide band voltage from 100-250V and compatibility with both AC/DC power sources, ensuring low consumption. It comes standard with one normally open and one normally closed auxiliary contact. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive range of accessories ensures the contactor can meet most application requirements. This compact unit measures 3.03 inches in height, 1.77 inches in width, and 3.39 inches in depth, weighing just 0.82 lbs. It is certified to UL, CSA, IEC, CCC, EAC, and Marine standards, and meets the RoHS/REACh regulations, making it a Green Premium product.

TeSys Giga high power contactor, 4 poles (4 NO) for category AC-1 applications up to 385A @440V. It provides a 200-500V AC/DC wide band low consumption electronic coil, PLC output control and embedded highly reliability 1NO+1NC auxiliary contact block (17V 1mA). Designed for demanding applications with maximum operating rates up to 600 cycles per hour and environments until 60°C. It procures high reliability and durability with 5 Mcycles mechanical durability. Local and Remote Contact Wear Diagnosis (CWD) as standard function, continuous monitoring with healthy and alarm indicators. It is possibility to replace switching module (main contacts), enhancement contactor life. Contactor can be fixed in all quadrants, maintenance without removing cables/busbars, and OLR could be directly mounted below contactor. To be used with power connection by bolted connection with cable memory kit and control connections by spring terminals, accessible from front for easy and quick replacement. It provides IP2x protection in Front face with shrouds conforming to IEC 60529 and VDE 0106. It can cover -25°C to 60°C operation ambient air temperature and directly mounted on plate, No derating up to 3000m altitude. The dimension is 290mm x 185mm x 209mm (H x W x D), compact size enables panel space savings. Multi standards certified(CE,CB,CCC,cULus,EAC,KC,RCM,Marine) and Green Premium compliant (RoHs/Reach). Unique QR code provides quick access to complete product data.

The IEC Contactor S6 is a robust power contactor designed for AC-3 applications. It has a rating of 115A and a capacity of 55 kW / 400 V AC (50-60 Hz) / DC operation, making it suitable for a wide range of industrial applications. This contactor features 110-127V AC/DC auxiliary contacts, offering 2 NO + 2 NC. It is available in frame size S6, with busbar connections and drive: conventional screw terminal. The IEC Contactor S6 is UL listed under File E31519 in Vol.11 Sec. 5, ensuring compliance with safety standards.

The AC3 Contact Relay is a robust and reliable solution designed to handle high power applications. With a rating of 65A, 30kW / 400V, it offers superior performance in industrial environments. The relay features 2 NO (Normally Open) and 2 NC (Normally Closed) contacts, ensuring versatility in various control systems. It operates at a voltage of 24 V DC, providing efficient and reliable operation. Equipped with a varistor for enhanced protection, this 3-pole relay is suitable for use with PLC outputs.The AC3 Contact Relay is available in size S2, featuring screw terminals that are compatible with 2A PLC outputs. This ensures seamless integration into existing control systems and enhances the overall efficiency of your industrial operations. With its high-quality construction and advanced features, this contact relay is a reliable choice for demanding applications.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 18A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 5HP at 200 to 208VAC, 5HP at 240VAC, 10HP at 480VAC and 15HP at 600VAC three phase. Contactor is also rated for 1HP at 115VAC and 3HP at 240VAC single phase. Contactor is supplied with a 24 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Spring terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.90 inches tall, 1.77 inches wide and 3.39 inches deep. It weighs 0.73 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 32A resistive load rating. Contactor is supplied with a 240 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.58 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

The TeSys Giga high power contactor is a robust solution designed for demanding applications, offering 4 poles (4 NO) for category AC-1 applications with a maximum current capacity of 700A at 440V. It features a wide band low consumption electronic coil that operates within a voltage range of 48-130V AC/DC. The contactor is equipped with an embedded highly reliable 1NO+1NC auxiliary contact block, which provides a constant current of 17V and 1mA.This contactor is designed to operate at maximum rates of up to 600 cycles per hour in environments up to 60°C. It offers high reliability and durability with a mechanical durability of 5 Mcycles, ensuring long-term performance. The local Contact Wear Diagnosis (CWD) function allows for continuous monitoring of the contactor's health status, providing healthy and alarm indicators.The TeSys Giga contactor can be fixed in all quadrants, allowing for maintenance without removing cables or busbars. It also includes an OLR that can be directly mounted below the contactor. The contactor is designed to be used with power connections by bolted connection and control connections by spring terminals, accessible from the front for easy and quick replacement.The contactor provides IP2x protection in the front face with shrouds conforming to IEC 60529 and VDE 0106. It can operate within a temperature range of -25°C to 60°C and is directly mountable on plates, with no derating up to an altitude of 3000m. The compact dimensions of 290mm x 185mm x 209mm (H x W x D) enable panel space savings.The TeSys Giga contactor is multi-standard certified (CE, CB, CCC, cULus, EAC, KC, RCM, Marine) and Green Premium compliant (RoHS/Reach). It also features a unique QR code for quick access to complete product data.

D-SUB connector, 9-pos. female connector, two 35° cable entries, bus system: Modbus, Modbus Plus, BITBUS, ARCNET, MULT/MININET (B&R), SYSTEM 2003 (B&R), P-NET, pin assignment: 1, 2, 3, 5, 6, 8; screw connection terminal blocks

The Siemens AC-3 Power Contactors are designed for high-power industrial applications. These contactors offer a rating of 15kW at 400V, and can handle up to 32A. They feature a 3-pole design with 2 normally open (NO) and 2 normally closed (NC) contacts, making them suitable for a wide range of applications. The contactors are designed for AC operation at 230V with a frequency of 50Hz.The Siemens AC-3 Power Contactors come in the S0 size and feature removable screw terminals for easy installation and maintenance. They also include an auxiliary switch that can be removed as needed, providing flexibility for different applications.

Introducing the Schneider Electric TeSys D Reversing Contactor (MPN: LC2D09KUE), a 3-pole device designed for motor applications up to 4kW at 400V. This compact and robust contactor is equipped with a low consumption electronic coil, operating within a voltage range of 100-250V AC/DC. It also features built-in auxiliary contacts (2NO + 2NC), NC mirror certified for safety systems integration. The TeSys D Reversing Contactor is designed with durability in mind, boasting high electrical durability guaranteed for 2 million cycles at 9A AC-3 440V. It also offers a wide band voltage range of 100-250V, making it compatible with both AC and DC power sources. This contactor is easy to install, featuring DIN-rail mounting and screw clamp terminals for connections. The mechanical interlock ensures reliable operation, while the pre-wired reversing circuit simplifies wiring. The clear separation between power and control circuits enhances safety and ease of use. The Schneider Electric TeSys D Reversing Contactor is a multi-standards certified product (IEC, UL, CSA, CCC, EAC, Marine) and complies with Green Premium standards (RoHs/Reach). It's available worldwide and suitable for various applications, including demanding motor switching.

TeSys F AC coil 220/230V 40-400Hz (voltage code M7/P7), low sealed consumption, high tolerance to voltage drops, for TeSys F 3-pole and 4-pole contactors LC1 F185, FG185, F225. It operates in voltage limits 0.85-1.1 Uc and environments until 55°C. It provides high operating rates to the contactor, until 2400 cycles/hour. Green Premium compliant (RoHS/REACh).

TeSys K control relay, 4 contacts (2NO + 2NC), 10A/690V, for control of electromagnetic loads AC-15/DC-13. It provides a 24V DC control circuit with no inrush consumption and equipped with a surge suppression device, connection by screw clamp terminals. For high operating rates until 180 cycles/min and ambient temperature -25/+50°C, it procures high reliability and durability. Compact (45mm width), for clipping on 35mm DIN rail or fixing by screw. Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium product (RoHS/REACh).

AF09 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available.

The DFC T 2,4 QVGA S 1018 is a TFT display module measuring 2.4 inches diagonally, delivering a resolution of 320 x 240 pixels (QVGA). The display utilizes a transmissive panel technology with LED backlighting, ensuring clear visibility under various conditions. It operates within a temperature range of -20°C to 70°C, making it suitable for diverse environments.Constructed with dimensions of 72 mm x 59 mm x 9 mm, the display frame is finished in yellow (RAL 1018) and features untreated surface characteristics. The display's contrast ratio is 500, with a viewing direction of 6:00, enhancing readability from multiple angles. The module interfaces via SPI, ensuring efficient communication with connected devices.Manufactured in Germany, this product adheres to IEC 60068-2-6:2007-12 standards, proving its robustness to vibrations across specified frequency ranges. The ambient storage temperature tolerances extend from -30°C to 80°C, offering additional versatility for transport and storage conditions.

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 40A resistive load rating. Contactor is supplied with a 24 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.13 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 0.94 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

TeSys D reversing contactor, 3 poles (3NO), for motor control applications up to 12A/690V AC-3 (5.5kW@400V). It provides 440V 50/60Hz AC coils, 2NO+2NC built-in auxiliary contacts (NC mirror certified), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (90mm width), DIN-rail mounting or screw fixing. With pre-wired reversing power connections, mechanical interlock (without electrical interlocking). Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).

TeSys D contactor, 3 poles (3NO), for switching 3-phase capacitor banks up to 12.5kVAR@400V 50Hz (21kVAR@690V). It provides a 240V 50/60Hz AC coil, 1NO+2NC instantaneous auxiliary contacts, with front mounted early make poles and pre-wired damping resistors for current limitation. For operating rates until 240 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (45mm width), DIN-rail mounting or screw fixing. Certified IEC 60947 and compliant with shunt capacitors standard IEC 60831, Green Premium product (RoHS/REACh).